Wood gasifier project updated
Wood gasifier project updated
Figured I would post a couple of pics of my gasifier project.
Trying to make this one to power our lawn mower with and get a general idea on what works well.
This one's fairly basic I made the cone adjustable inside the fire tube and made the grate to where it was adjustable separatley. The air injectors are 3/8 hex nipples cut in half
If my math is correct this should get me in the ballpark for a working gasifier but I'm sure there will be a lot of tuneing to be done before its dialed in.
Got lucky and traded some bushog work for a 6" stainless tube with a flange welded on plus a 12 ga restrictor cone and a couple of 1/4" thick discs to use a grates.
The tank that the stainless piece slides into was an old air brake tank off a truck I believe. It was a double chamber tank and I was able to use the inner tank end as a baffle/support for the bottom of the firetube and use the top of the tank for the bottom stand to seal the gas chamber and run an adjuster rod to the grate.
The outer tank is to collect the gas and insulate the inner tank to keep the intake air hot. The cyclone is 5 " and will tie into the outer tank.
Got an idea for a cooler/condensor that I want to try basically a ring of tubes with a double squirrel cage blower set inside of it to cool things off.
Still kicking ideas around for a primary filter.
Y'all I dumped my photobucket account and put some pics of this in my album instead. Just click on my user name to get there
Trying to make this one to power our lawn mower with and get a general idea on what works well.
This one's fairly basic I made the cone adjustable inside the fire tube and made the grate to where it was adjustable separatley. The air injectors are 3/8 hex nipples cut in half
If my math is correct this should get me in the ballpark for a working gasifier but I'm sure there will be a lot of tuneing to be done before its dialed in.
Got lucky and traded some bushog work for a 6" stainless tube with a flange welded on plus a 12 ga restrictor cone and a couple of 1/4" thick discs to use a grates.
The tank that the stainless piece slides into was an old air brake tank off a truck I believe. It was a double chamber tank and I was able to use the inner tank end as a baffle/support for the bottom of the firetube and use the top of the tank for the bottom stand to seal the gas chamber and run an adjuster rod to the grate.
The outer tank is to collect the gas and insulate the inner tank to keep the intake air hot. The cyclone is 5 " and will tie into the outer tank.
Got an idea for a cooler/condensor that I want to try basically a ring of tubes with a double squirrel cage blower set inside of it to cool things off.
Still kicking ideas around for a primary filter.
Y'all I dumped my photobucket account and put some pics of this in my album instead. Just click on my user name to get there
Last edited by Ford4jack on December 19, 2008, 1:11 am, edited 2 times in total.
- ezernut9mm
- Posts: 9141
- Joined: July 21, 2006, 9:37 pm
- Location: KCMO

i'm not sure what i'm looking at, but i'll bet it will make for one weird looking lawnmower engine! lol
always
"i believe i've achieved satisfaction".-bubbles
"should i be gettin" baked for this boys?"-bubbles
i could no longer keep "r.i.p.ing" all of our fallen brothers and sisters, so i say here, slick loads of love and much respect to all you beautiful people.
"i believe i've achieved satisfaction".-bubbles
"should i be gettin" baked for this boys?"-bubbles
i could no longer keep "r.i.p.ing" all of our fallen brothers and sisters, so i say here, slick loads of love and much respect to all you beautiful people.
I hear ya and would have a hard time explaining how these work
I lack the brain word connection for describing things.
Basically I'm wanting to use cooked off gas from wood chips or chopped corncobs to make a gas to power an engine. This is old stuff and was used in europe a lot during WW2. It was used to power early street lamps in some cases also.
If you put woodgas mower into a youTube search theres a fellow useing one on his mower.
I lack the brain word connection for describing things.
Basically I'm wanting to use cooked off gas from wood chips or chopped corncobs to make a gas to power an engine. This is old stuff and was used in europe a lot during WW2. It was used to power early street lamps in some cases also.
If you put woodgas mower into a youTube search theres a fellow useing one on his mower.
Last edited by Ford4jack on September 26, 2008, 11:43 am, edited 1 time in total.
good luck on that project
my uncle told me stories about cars that ran off of wood smoke
he saw them in germany in ww2
my uncle told me stories about cars that ran off of wood smoke
he saw them in germany in ww2
.
.
.
'' I think what scares me the most about you guys is that I understand you '' ..... KID
'' lookin good, a little paint adds at least 100hp!'' ....... COOTER
'' well an old guy can dream cant he? ''............ICEMAN
''I would donate organs before selling my slick''........ HOOFBEAT RACER
.
.
'' I think what scares me the most about you guys is that I understand you '' ..... KID
'' lookin good, a little paint adds at least 100hp!'' ....... COOTER
'' well an old guy can dream cant he? ''............ICEMAN
''I would donate organs before selling my slick''........ HOOFBEAT RACER
Thought I would add a couple of pics of the cooler I went with.
Its raining here now might get to work on this project without catching the yard on fire
Still have to trim and weld the tubes add a inlet & outlet, cleanout plug etc
Going to mount a fan on the end to move air thru the tubes.
Picked up an large army ammo box to use for a primary filter sure hope the flyovers from the local guard
dont see this as a trailer mounted morter and rocket launcher in our yard
Its raining here now might get to work on this project without catching the yard on fire
Still have to trim and weld the tubes add a inlet & outlet, cleanout plug etc
Going to mount a fan on the end to move air thru the tubes.
Picked up an large army ammo box to use for a primary filter sure hope the flyovers from the local guard
dont see this as a trailer mounted morter and rocket launcher in our yard
Last edited by Ford4jack on December 19, 2008, 1:13 am, edited 1 time in total.
what type of wood are you gonna use?
i think pallets have pine boards in them(should smoke good)
an endless supply of 'free' fuel
i think pallets have pine boards in them(should smoke good)
an endless supply of 'free' fuel
.
.
.
'' I think what scares me the most about you guys is that I understand you '' ..... KID
'' lookin good, a little paint adds at least 100hp!'' ....... COOTER
'' well an old guy can dream cant he? ''............ICEMAN
''I would donate organs before selling my slick''........ HOOFBEAT RACER
.
.
'' I think what scares me the most about you guys is that I understand you '' ..... KID
'' lookin good, a little paint adds at least 100hp!'' ....... COOTER
'' well an old guy can dream cant he? ''............ICEMAN
''I would donate organs before selling my slick''........ HOOFBEAT RACER
Just don't blow yourself up. 
My "Slickitis" affliction began here...

66 F100 CC/65 F100 CC/66 F250 CC
If it starts to rain, they'll tax the splash.
If you want to fish, they'll tax the bass.
If you plant a yard, they'll tax the grass.
If you don't play nice, they'll fine your *$#!

66 F100 CC/65 F100 CC/66 F250 CC
If it starts to rain, they'll tax the splash.
If you want to fish, they'll tax the bass.
If you plant a yard, they'll tax the grass.
If you don't play nice, they'll fine your *$#!
Yep its getting heavy and I still have to build a trailer to pull it on.
Its not real bad yet the tanks are 12"dia but yes it will be a boat anchor
when its done.
Really now that I'm into this project I see that it might have been
better to just go with a full size unit for a truck.
Still shootin for that thrill of victory though.
Its not real bad yet the tanks are 12"dia but yes it will be a boat anchor
when its done.
Really now that I'm into this project I see that it might have been
better to just go with a full size unit for a truck.
Still shootin for that thrill of victory though.
Update on the woodgas project
Got the trailer made and most everything mounted.
The filter box is just set on there still need to plumb it it and gather a few parts to finish it.
I will get back on it this spring its time to get some cool weather work done on the treefarm for the next month or two
Got the trailer made and most everything mounted.
The filter box is just set on there still need to plumb it it and gather a few parts to finish it.
I will get back on it this spring its time to get some cool weather work done on the treefarm for the next month or two
Last edited by Ford4jack on December 19, 2008, 1:13 am, edited 1 time in total.
- ThinLizzy13
- Posts: 765
- Joined: October 5, 2012, 5:29 am
- Location: Catskills NY

Re: Wood gasifier project updated
I know this is an old post but did you ever get this working? (Or has anyone else tried anything like this)
I brought it up in chat a couple weeks ago. Someone mentioned there might be a thread on here about it. This is the only one I could find.
I had a friend whose older brother was trying to make a farm truck run off one. He went to an environmental college and alternative fuels was one of his projects. I don't think he ever got it to work though...
I got interested in them after I saw a history channel show where they make a generator run off one. I did some google "research" and found an old gov't manual for one (Has a Ford 8n running off a gasifier on the cover). Apparently there was a big push to get farmers to use them during the war. If anyone is interested I'll dig up the link for it.
I brought it up in chat a couple weeks ago. Someone mentioned there might be a thread on here about it. This is the only one I could find.
I had a friend whose older brother was trying to make a farm truck run off one. He went to an environmental college and alternative fuels was one of his projects. I don't think he ever got it to work though...
I got interested in them after I saw a history channel show where they make a generator run off one. I did some google "research" and found an old gov't manual for one (Has a Ford 8n running off a gasifier on the cover). Apparently there was a big push to get farmers to use them during the war. If anyone is interested I'll dig up the link for it.
'63 F100 223 3OT
‘20 F150 XL
‘20 F150 XL
- ThinLizzy13
- Posts: 765
- Joined: October 5, 2012, 5:29 am
- Location: Catskills NY

Re: Wood gasifier project updated
Ok I was wrong about the 8n
Heres the manual I printed out
http://www.soilandhealth.org/03sov/0302 ... oodgas.pdf
Heres the manual I printed out
http://www.soilandhealth.org/03sov/0302 ... oodgas.pdf
'63 F100 223 3OT
‘20 F150 XL
‘20 F150 XL
