So WHAT would YOU build??

A place for discussion of off topic subjects. Pretty much anything goes - just keep it civil, please!

Moderators: Casey 65, Kid

Post Reply
User avatar
bigtrip460
Posts: 305
Joined: February 4, 2007, 7:34 pm
Location: OHIO!
Contact:

Post by bigtrip460 »

1) What would YOU build?
2) What do you dislike about your current vehicle(s)?


1) it wouldnt be totally new, but I would like to do a galaxie with a nice budget.

2) I wish I had the budget to make it more reliable and do the body like I want. til that day I guess its a piece at a time.
User avatar
ezernut9mm
Posts: 9141
Joined: July 21, 2006, 9:37 pm
Location: KCMO
Sweden

Post by ezernut9mm »

i would build a rust proof 64 shortie that cornered like it was on rails, stopped on a dime (and gave change), and took off like a rocket with no sqeeks or rattles while getting 50+ mpg with the a/c running.

i can't even begin to tell you what i hate about my current dd without writing a disertation, so i will leave it at that.
always
"i believe i've achieved satisfaction".-bubbles
"should i be gettin" baked for this boys?"-bubbles


i could no longer keep "r.i.p.ing" all of our fallen brothers and sisters, so i say here, slick loads of love and much respect to all you beautiful people.
Phil
Posts: 2125
Joined: June 1, 2007, 9:37 pm
Location: toledo

Post by Phil »

My Uni is what I really want to do next. Its completely free from my usual "correct" mentality.

As a dream I think I'd like to try a concourse drag pac 70 Cyclone.
Or if we're really off the reservation an old Ferrari.
Or *yawn a Shelby Cobra


Current rides gripes
70 Fairlane should be faster, the paint isn't as nice as I'd like, it randomly stalls, needs a Detroit locker and a gear, Its an Automatic :? .

68 Fairlane. Its an Ac vert and its still not valuable. Not my favorite styling-an aquired taste. Its an Automatic :?

62 Unibody. Its an Automatic :?
Its a gas hole
Seats ripped.
No room or cash to do it right.
No place to park it inside
Some idiot hauled gravel or cinderblocks in it.
The hacked dash for the radio
Grant Wheel
tailgate, nuff said
Someday I'll get another slick :(
Image
User avatar
6166 Junkyard Dog
Posts: 3502
Joined: July 23, 2006, 9:34 am
Location: Reidsville, N.C.
Contact:
United States of America

Post by 6166 Junkyard Dog »

Short bed, Big Back Window, Mercury with the 61 Mercury grill in it, then I would take my little 427 stroker out of my 56 and go in that truck
Tom,
@
Lazy FORD Ranch
Where Ford Trucks Rest in Peace

Dakota,,, RIP will never be the same looking for 61-66 trucks again ,, :cry: Kathy :cry:
Slickstock,,, York, PA
Slickstock,,, Kansas City, MO
Slickstock,,, Altoona, IOWA
Slickstock,,, Salina, KS

Now Cooper will try his best :lol: :lol:

12649

Cooper now has 2018 Slick Stock,, give him a fair star :lol:
Slickstock Kansas City, Mo
User avatar
Ford4jack
Posts: 707
Joined: July 22, 2006, 7:56 am
Location: Tennessee

Post by Ford4jack »

1) What would YOU build?
I would go with a falcon type vehicle something easy to work on cheap on gas made from iron & steel

2) What do you LIKE about your current set of wheels?
Its a slick

3) What do you dislike about your current vehicle(s)?
The gas mileage


Dream car
55 Studebaker Speedster

Guess I just need to set the wayback machine to 1962 :lol:
User avatar
Johnny Canuck
Posts: 8291
Joined: April 9, 2006, 11:14 pm
Location: Edmonton, Alberta.
Canada

Post by Johnny Canuck »

I want to buy the truck Tom is gonna build ;)

Honestly I can't have just one vehicle... you can't do the things I want with only one, but one of those Aussie Utes with a supercharged 5.4 and left hand drive would come dam close, at 1/2 the price :wink:
http://www.ford.com.au/servlet/ContentS ... &c=DFYPage

For a cruiser truck I would probably build a short uni on a CV frame with a turbo Diesel of some sort that was light enough not to bottom out the suspension, or just go for a Roush V8

For a car, it is very hard to describe, but would look more like a Batmobile from one of the modern Batman movies than anything. Unlimited budget, unlimited resources, it would be a gas or steam turbine powered unit , capable of 0-sixty pulling 6 g's, and stick to any road like baby crap to a blanket.

For a Work truck? Tough-as-nails Bumpside longbox with a Powerstroke.

Of course being Canadian, I bet Doc was waiting for me to say I'd build a Ski-Doo. But, to be honest with you, there ain't enough snow down south here to run 'em. Useless as motorbikes. :arse:
It's a race.. Will hell freeze over or will JC finish his truck first. Stay tuned..
User avatar
jwh f-100
Posts: 1903
Joined: June 11, 2007, 6:25 pm
Location: Equinunk, PA
United States of America

Post by jwh f-100 »

1) What would YOU build?
-First I would finish my '62
-My current "dream build" is scared.gif (no not a GM) is....

My fater has a 1941 or 42 (Can't remember) international pick up. I had thoughts of removing the cab and installing it on a International 3800 chassis (probably an old school bus as a donor) with either a 466 or a 360 with an allison auto transmission. Kinda like a prehistoric CTX. If I went with a 466 it would need to be hyd. brakes as the compressor sits very high and may cause clearence issues but may be able to go air brakes with the 360 as the compessor sits low. Most definately if it had air brakes it would have an air ride seat and BIG azz air horns. I would most likely need to do some stretching to the hood and fenders, I don't think the DT, the big radiator, and the charge air cooler would fit in the "42s engine compartment. Definatly stacks would be installed.I woud give it about a 200" wheel base with a flat bed. OR a shorter wheel base with a step side box or a box off one of those big army trailers.
2) What do you dislike about your current vehicle(s)?
What I don't like about my slick is the "cob job" the PO did to install the current engine.... I wish that much of it was OEM..Soon to be fixed though.
The Ranger - not 4x4 and not "truck enough" to tow
3) What do you LIKE about your current set of wheels?
I like that everything I don't like I can be changed. Maybe that's why we sometimes spend more time with the truck than the wife. :D

Good thread Doc!
User avatar
DocDave
Posts: 206
Joined: July 17, 2006, 4:00 pm
Location: Fort Providence Northwest Territories

Post by DocDave »

Here's a wierd one for ya
I've already got the design figured but just dont have the time and resources
A 3 wheeled (2 up front) motorcycle that leans into corners (all wheels lean) Very low totally enclosed single seat with maybe a 1200cc. I think it would be a hoot. (ya they already built one but it doesnt lean)

Failing that a Big back window Barracuda with a large Hemi

What I like about my truck is it's all mine, even the mistakes I make while building it
What I dont like is the mistakes I make while building it ( and the previous owners mess)
Dave
From a guy without his Ford that he left on a rock in the North Atlantic.
User avatar
jwh f-100
Posts: 1903
Joined: June 11, 2007, 6:25 pm
Location: Equinunk, PA
United States of America

Post by jwh f-100 »

If I went with a 466 it would need to be hyd. brakes as the compressor sits very high and may cause clearence issues but may be able to go air brakes with the 360 as the compessor sits low.
Where is my head. I'm glad my memory is the first thing I'm loosing.
I just looked at a couple vehicles in the yard. The 466 is the one with the lower mounted compressor so i guess it would be the best "air brake" option. I think both the 466 and the 360 would work well with hyd. brakes but the 360 is a much "shorter" engine so maybe the best bet for my "dream" build.

Maybe I am just nuts :bangin: what the heck would I do with a 10 ton 1942 International pick up?????
User avatar
Johnny Canuck
Posts: 8291
Joined: April 9, 2006, 11:14 pm
Location: Edmonton, Alberta.
Canada

Post by Johnny Canuck »

DocDave wrote:Here's a wierd one for ya
I've already got the design figured but just dont have the time and resources
A 3 wheeled (2 up front) motorcycle that leans into corners (all wheels lean) Very low totally enclosed single seat with maybe a 1200cc. I think it would be a hoot. (ya they already built one but it doesnt lean)

Failing that a Big back window Barracuda with a large Hemi

What I like about my truck is it's all mine, even the mistakes I make while building it
What I dont like is the mistakes I make while building it ( and the previous owners mess)
Dave
um ... Dave...
http://hubpages.com/hub/CanAm_Spyder_3- ... Snowmobile
It's a race.. Will hell freeze over or will JC finish his truck first. Stay tuned..
User avatar
Johnny Canuck
Posts: 8291
Joined: April 9, 2006, 11:14 pm
Location: Edmonton, Alberta.
Canada

Post by Johnny Canuck »

something like this here
http://www.teslamotors.com/performance/ ... torque.php
would make a p!$$pot full of money in this day and age.

The next pet rock IMO, as, unless you are generating your own wind power or photovoltaic power, you are still using electricity from a grid produced by burning coal. Now, if Tesla had REALLY been successful we wouldn't have to worry about that.
http://www.livevideo.com/video/Drachnid ... t-1-2.aspx
Last edited by Johnny Canuck on September 12, 2007, 8:17 pm, edited 1 time in total.
It's a race.. Will hell freeze over or will JC finish his truck first. Stay tuned..
User avatar
Red62Uni
Posts: 131
Joined: September 18, 2006, 6:17 pm
Location: MD

Post by Red62Uni »

66 k code mustang fastback 4 speed i love every aspect. i would build thousands for me if that is all who wanted them.
1962 F-100 Unibody All Original minus repaint
65 Mustang Fastback
68 Mustang Coupe (my baby)
79 Trans Am
BigTim
Posts: 890
Joined: August 6, 2006, 4:26 pm
Location: Slickless

Post by BigTim »

The list is long and distinguished, but one thing I would really like to build is a 61 Starliner. Close to a perfect a body as Ford ever made IMO.

Then maybe a T Bolt clone.

Sleeper 2 door 79 Fairmont.

Several different years of Torinos.

32 3 window.

SWB Uni.
User avatar
DocDave
Posts: 206
Joined: July 17, 2006, 4:00 pm
Location: Fort Providence Northwest Territories

Post by DocDave »

JC Ummmm NO That is one ugly machine but it might go over well here. I like the T-Rex style but with a leanable suspension, not a snowmobile conversion. They used to sell those front wheel conversions way back in the 70's and I hated them then.

[albumimg]2750[/albumimg] Nicer
[albumimg]2749[/albumimg] Ugly
Dave
From a guy without his Ford that he left on a rock in the North Atlantic.
User avatar
Johnny Canuck
Posts: 8291
Joined: April 9, 2006, 11:14 pm
Location: Edmonton, Alberta.
Canada

Post by Johnny Canuck »

Hey tried to be helpful Dave. Bikes have as much relevance to me as snow shoes do to a Panther.
It's a race.. Will hell freeze over or will JC finish his truck first. Stay tuned..
User avatar
bigtrip460
Posts: 305
Joined: February 4, 2007, 7:34 pm
Location: OHIO!
Contact:

Post by bigtrip460 »

If you could have your own vehicle manufacturing plant with unlimited resources,
what cars/trucks/motorcycles/..... wheelchairs would you build.



galaxies, torinos, falcons , fairlanes and maybe the 69/70 mustang. I would build them how they NEED to be done. 3 different levels for different people like better than stock, hot streeter, and full on badass! 8)
User avatar
Greg D
Posts: 10113
Joined: September 13, 2006, 4:39 pm
Location: Podunk Iowa
United States of America

Post by Greg D »

I pretty much don't think in terms of new cars (the 05 GT is an anomoly for me).
A Torino GT, 68/69 - or 71 (I just like the 71 grill better than the 70).
1965 Mercury Comet, just a 2 door sedan will do it ain't gonna stay stock anyway.
1993 SSE Mustang - Yellow
Ford Model A sedan - traditional Hot Rod.
Finish the Uni first though.
Those are actually in reverse order though.....
1964 F 100 - I am going to do "something" with it.......

viewtopic.php?f=32&t=15942

1987 Mustang LX Convertible, 2.3 Auto - cruiser.
1994 F 150 XLT 2WD


~ Yes - I adopted another cat..............

Cam L Milan,
You'll be missed my friend.
Post Reply