My son had tried to start it , the day before....
No gas to the carb he thought, so we filled tank & blew in tank
DAM IT ! ... I left the key on , he says.....
Swapped batteries and tried it..... No start.....
Tilted up the cab, looked down carb throat... Getting gas , I see....
Let's check for spark.... He climbs in tilted cab, I hold wire.... No spark
(I'll tell you here... This is a 73 gmc.... 350 engine)
I love this old girl... First grain truck I bought....
So we pulled the cap... Yep... Points are fried...
From leaving the key on ? ... Well, yea.... That probably finished them , I say
To town & got new points
... 3 years ago I could read the smallest print... Not anymore...
And I didn't have my glasses....
I explained to him how to 'set' the gap
He got them in & we put it together..... No spark.....
I need a dwell meter I tell him..... What's that ? He says
So we go to the old shop , and dam if it wasn't right where I put it
A long time ago... 7-8 ? Years ago ?
Blew the dust off and hooked to the coil... No dwell...
You sure they are closing ? I ask.....
I open the little window in the cap & adjust them a bit.... Here we go !
Started right up !
..... Why do they call it a dwell meter ? He asks me....
Hell if I know, I say
Then I wondered why it WAS called a dwell meter.....
I try to know these things...... But if I dont....
I'm not going to dwell on it




