Missed it this year again
http://www.torinocobra.com/forum/viewtopic.php?t=1928

mcford wrote:http://s24.photobucket.com/albums/c19/m ... ks%202007/
I drove Chris Jones' 70 GT convertible. 351C 4V, 4speed, 3.50 trac loc, manual steering AND brakes! Car and driver weighed in at 4,090 lbs. with a full tank of gas. First run was a 15.60 and couldnt best it the rest of the day. Saturday morning Glenn showed up and he/we found the vacuum leak I heard that morning and fixed that. THANKS GLENN! Definitely helped. My only run in practice saturday morning was a QUICKER 15.50 @ 90mph. I was paired up against a 69 road runner for my best of three shootout. First round i won with a 15.40, quickest run yet. second round was even quicker with a 15.35, letting off at the end hoping the RR would get by me so we could go to round three. Wasnt enough and I still got him.
Might have been able to crack a 14.999 had i stuck my 4.11 locker in!
Ron Tuttle ran his quickest ever with his fresh motor in the 70 Cyclone... 13.41 @ 107mph!!!!! He won his shootout in 2 rounds.
Chris won his shootout in two rounds also, dont remeber what Chris ran but believe it was on the 14.20's during his shootout. In practice he ran a personal best of 14.16!!!
Ed lost his shootout by breaking out in the second round. Thats a good thing cuz he went his fastest of the weekend!
The Boss 351 pulled the pinion and pinion support RIGHT OUT of the case on his first test run friday!!! Pinion and carrier were still attatched to the driveshaft laying on the ground! Found another case, swapped the carier with ring gear and the pinion into the empty case and made it with 5 minutes to spare for ONE qualifying run on friday. If there is ANYONE that shows absolutely NO MERCY on a car at the pure stocks, its the Ragin Cajun!

Holy crap!The Boss 351 pulled the pinion and pinion support RIGHT OUT of the case on his first test run friday!!! Pinion and carrier were still attatched to the driveshaft laying on the ground! Found another case, swapped the carier with ring gear and the pinion into the empty case and made it with 5 minutes to spare for ONE qualifying run on friday.

My buddy just did the same thing to his rear end in his 64 427 Fairlane at the FFW in Dallas, let the clutch out at 6 grand and all hell broke loose.Slick Fan wrote:Holy crap!The Boss 351 pulled the pinion and pinion support RIGHT OUT of the case on his first test run friday!!! Pinion and carrier were still attatched to the driveshaft laying on the ground! Found another case, swapped the carier with ring gear and the pinion into the empty case and made it with 5 minutes to spare for ONE qualifying run on friday.I can't say I've ever heard of that particular type of rear end failure before. I bet that made a nice noise...wonder what the bottom side of his floorboards look like about now.
Good lookin' cars there, from all camps.
