Ignition issues. 3v from coil under throttle

The place to talk Slicks. All we ask is that discussion has something to do with slicks...

Moderators: Casey 65, Kid

bruceandersson
Posts: 906
Joined: August 12, 2009, 9:44 am
Location: Ohio

Re: Ignition issues. 3v from coil under throttle

Post by bruceandersson »

Wow, I have just been sitting back watching this thread. I am amazed at the level of understanding some of our members have. When I converted my 65 to electronic ignition, I just connected it up based on an article and hoped for the best. Guess I was lucky. I am also amazed at how former owners seem heck bent on screwing up wiring. I have a crate of boogered up harnesses that I keep for spare parts and connectors.
Leeroy
Posts: 1115
Joined: July 12, 2009, 3:52 am
Location: Melbourne, Australia
Australia

Re: Ignition issues. 3v from coil under throttle

Post by Leeroy »

^^ agreed about the previous owners(s) Although I've come to learn even the professionals, aka auto electricians, can leave things a bit ordinary in butchered wiring department!
tomrooster
Posts: 613
Joined: July 28, 2006, 8:31 pm
Location: Monroe NJ
United States of America

Re: Ignition issues. 3v from coil under throttle

Post by tomrooster »

Toyz, I was wondering how the timing gets retarded when the white wire is energized if he has a vacuum advance. I have a similar setup in my truck and I have the white wire connected. Thanks , Tom
1966 F250 Camper Special parts truck
1966 F 100 w/391 ft
1965 F 100 project
1958 Edsel Pacer Convertible
1953 ford Customline 2 door
1952 8N
1967 triumph Bonneville

I'm still not a good welder but I've become a good grinder
User avatar
Toyz
Posts: 4334
Joined: March 22, 2011, 6:23 pm
Location: Baja Houston Taxes
United States of America

Re: Ignition issues. 3v from coil under throttle

Post by Toyz »

With a properly set up ported vacuum, there will be little to no advance at cranking speed. Two things happen when the white wire is energized on the blue strain DS II. Full available voltage is directed to both coil and module, and the electronics "retard" the firing event by up to ten degrees. That is one of the items which makes the DSII a great system! By virtue of an additional resistor, a switch, and some wiring, one can have a very good selectable electronic retard system. If you are cheap like me, this will allow you to run on lower octane fuel for daily driving and easily switch to a normal advance curve for towing, racing or other increased loading when operating with premium fuel, or instantly retard things if spark knock should be encountered. There is also, (or used to be), a replacement DSII module with even more features, readily swappable for the original. This type of adjustability was brought to an even greater degree with the advent of EEC IV, which allowed the use of a "piggy-back" system to alter timing and fuel events "on the fly".
Paul
The Ford Orphanage
Life's too short for boring vehicles!
My quest to develop a universal solvent is held up by the lack of a storage container.
Paul
Post Reply