I am going to change the gearing in my rear differential.
I would like to go from a 4.10 open differential to a 3.54 power lock.
I know there is a discrepancy between the front and rear track widths.
Is it better to go with wider rear tires or use a later model rear end?
Thank You!
Track width
- Blackwaterforge
- Posts: 893
- Joined: March 13, 2008, 9:22 am
- Location: Alabama
- Contact:

Track width
If it cain't be fixed with a sledge hammer it must be an electrical problem!
- 6166 Junkyard Dog
- Posts: 3502
- Joined: July 23, 2006, 9:34 am
- Location: Reidsville, N.C.
- Contact:

Re: Track width
I Would if it was mine go with say the 73-79 rear its a wider track but would also stabilize and make the truck handle better,, even thou mine is a F-100 my truck has the wider rear out of a 96 and mine handles real good ,, Only thing I would look at is tire clearance issues especially if loading the truck
Tom,
@
Lazy FORD Ranch
Where Ford Trucks Rest in Peace
Dakota,,, RIP will never be the same looking for 61-66 trucks again ,,
Kathy
Slickstock,,, York, PA
Slickstock,,, Kansas City, MO
Slickstock,,, Altoona, IOWA
Slickstock,,, Salina, KS
Now Cooper will try his best

Cooper now has 2018 Slick Stock,, give him a fair star
Slickstock Kansas City, Mo
@
Lazy FORD Ranch
Where Ford Trucks Rest in Peace
Dakota,,, RIP will never be the same looking for 61-66 trucks again ,,
Slickstock,,, York, PA
Slickstock,,, Kansas City, MO
Slickstock,,, Altoona, IOWA
Slickstock,,, Salina, KS
Now Cooper will try his best
Cooper now has 2018 Slick Stock,, give him a fair star
Slickstock Kansas City, Mo
Re: Track width
X2
Paul
Paul
The Ford Orphanage
Life's too short for boring vehicles!
My quest to develop a universal solvent is held up by the lack of a storage container.
Paul
Life's too short for boring vehicles!
My quest to develop a universal solvent is held up by the lack of a storage container.
Paul
- Roger Carter
- Posts: 730
- Joined: July 5, 2008, 7:11 pm
- Location: Corbett, Oregon

Re: Track width
X3
I installed a '77 F-100 rear end under a '66 F-100 a few years back. Had to relocate the spring perches and shock brackets to make everything fit. As I remember the '77 was about 4" wider overall than the '66. 235-75x15" tires on stock steel wheels cleared, but just barely.
As I remember you have a F-250. Correct?
I believe the F-250 4x4 Dents had the same width frame as the Slicks. Seems using a F-250 Dent 4x4 rear axle would minimize and fab / relocation work.
I installed a '77 F-100 rear end under a '66 F-100 a few years back. Had to relocate the spring perches and shock brackets to make everything fit. As I remember the '77 was about 4" wider overall than the '66. 235-75x15" tires on stock steel wheels cleared, but just barely.
As I remember you have a F-250. Correct?
I believe the F-250 4x4 Dents had the same width frame as the Slicks. Seems using a F-250 Dent 4x4 rear axle would minimize and fab / relocation work.
Roger Carter
- Blackwaterforge
- Posts: 893
- Joined: March 13, 2008, 9:22 am
- Location: Alabama
- Contact:

Re: Track width
Thanks Guys!
If it cain't be fixed with a sledge hammer it must be an electrical problem!
