wheel size opinions, all welcome...

The place to talk Slicks. All we ask is that discussion has something to do with slicks...

Moderators: Casey 65, Kid

Post Reply
HotRodMatt
Posts: 43
Joined: December 15, 2013, 10:11 pm
Location: Salinas CA

wheel size opinions, all welcome...

Post by HotRodMatt »

ok, so right now im running 225/75r15 in the front and 235/75r15 in the rear. 15x7's all around. time for new tires in the front so im probably gonna change up my sizes. same look just different sizes.

options are, 16x7 front with a 215/60r16 and a 17x8 rear with 235/55r17 OR 20x8 all around with 245/40r20

20's are .5 inch taller tire in the rear compared to the 17, but still slightly smaller than the current set up

wheels are same price, (tires more for 20's but not really a deciding factor)

thoughts?

will get lowered more in the future (actually sits slightly lower than in this pic) and will become a short-bed shortly (see what i did there?)

lets pretend these are the only options, and im not staying 15.


Image
User avatar
Truckrat
Posts: 2513
Joined: July 27, 2006, 5:06 pm
Location: Oklahoma City, Ok.
United States of America

Re: wheel size opinions, all welcome...

Post by Truckrat »

Nice looking truck! OrangeRcode posted a thread about 17 inch steelies he found. Might want to look at those. They are 17x7. TR
User avatar
Toyz
Posts: 4334
Joined: March 22, 2011, 6:23 pm
Location: Baja Houston Taxes
United States of America

Re: wheel size opinions, all welcome...

Post by Toyz »

I would think a 215/60 would look lost in the front wheel well. All your size choices look very minimal, IMO, with very little sidewall for cushioning.
I'm not exactly a proponent of the larger wheel diameters, but, even with those selections, I would much prefer enough tire to somewhat fill the wheel wells. Without knowing your particular usage plans; my only caveat would be that with the original beams, uneven wear will likely be a problem unless camber and effective toe-in is absolutely minimized within Ford's original wide range of tolerances.
The old standard statement applies; it's YOUR truck, as long as it's done safely, do it to your preferences. It would get pretty monotonous if all of us built to a common plan!
Paul
The Ford Orphanage
Life's too short for boring vehicles!
My quest to develop a universal solvent is held up by the lack of a storage container.
Paul
BarnieTrk
Posts: 1448
Joined: July 11, 2007, 2:37 pm
Location: Stanton, Michigan

Re: wheel size opinions, all welcome...

Post by BarnieTrk »

^^^^^ Well said, Paul

I'll also repeat the point - planned usage is a main factor; particularly if you plan to ever haul any loads over 1000-lbs. If so, then more side wall is preferred and a possibly a higher ply rating, such as 6 or 8-ply rated tires. Some would say, "Will it be your car or your truck?".

Not mentioned (but is important in my case) is the type of roads you plan to travel on. There are some that are good, smooth and paved while others are rough (meaning you may want to drive slower and swerve) and some are un-surfaced with MANY potholes & loose gravel. These are issues where the type size of tire selected will be noticed. Speed is a lesser factor but should be considered when selecting the type & size of tire; since these early 60's trucks were originally designed to likely run less than 60-mph most of the time. If you plan to drive your truck over 60 most of the time, then plan accordingly with appropriate tires, handling & braking abilities.

Ryan
User avatar
The Big M
Posts: 1360
Joined: August 9, 2006, 3:03 pm
Location: Rocky View County, AB
Canada

Re: wheel size opinions, all welcome...

Post by The Big M »

I think what you have looks pretty well-proportioned, so I would probably try to stay as close to the current tire diameter as possible. A lot of it depends on your preferred aesthetic, how much you plan to lower it, and the previously mentioned intended usage.

I agree with Toyz that the 215/60R16 would look pretty small. So of the options you've stated I would probably go with the 235/55R17. Though after looking through the Diamond Back catalog I see they do have a 235/60R17 in one style if you needed more load rating and bit more sidewall height.

That'd be my preference, just because for my truck I'd like to go with a 17" wheel without it looking too modern in terms of the tire profile, and I feel a 60-series might strike a nice balance.
Post Reply