Downloaded and printed the headliner P.D.F. from the files section on the Facebook site... thought I had it licked, The section above the rear window that holds the interior light is totally different then the one I have out of the 61, so I have to assume the headliner is as well
Is there a P.D.F floating around out there for a 61????
ARRRRGGGGG!!!!
- unibody madness
- Posts: 2147
- Joined: December 4, 2008, 4:33 pm
- Location: Paradise,CALIFORNIA 95969

ARRRRGGGGG!!!!
Turk build thread at:
http://slick60s.com/viewtopic.php?f=32&t=18944
It does not matter what you think, it only matters what you do about it!
http://slick60s.com/viewtopic.php?f=32&t=18944
It does not matter what you think, it only matters what you do about it!
- FarmMotorSports
- Posts: 451
- Joined: November 13, 2010, 6:55 pm
- Location: KS, Lawrence

Re: ARRRRGGGGG!!!!
May I suggest checking with your local farm (feed) store or big box store. They often have "slip sheets" brown thin cardboard pallet liners. Prefect for making patterns. And they are often trash.
PS. Add about an inch to the front, for starters. And trial and error from there till you have what you want for a pattern.
Oh, and I have not seen a PDF for low roof trucks. But the one you have is a good start. Too short in front and to tall in the back section.
PS. Add about an inch to the front, for starters. And trial and error from there till you have what you want for a pattern.
Oh, and I have not seen a PDF for low roof trucks. But the one you have is a good start. Too short in front and to tall in the back section.
61 F250 Unibody
5.9 Ford Diesel / Allison auto
& 4WD
5.9 Ford Diesel / Allison auto
& 4WD
Re: ARRRRGGGGG!!!!
I believe there is a NOS 61 headliner and the rear piece for sale in California Craigslist . Sorry I do not remember the exact California craigslist. You will have to search all of those. Price was 140 for the two pieces . At one time, I had an NOS piece for the area above the back window, don't know if I still have it or not. Don't have a clue to where it is if I do. As to the main overhead piece very good chance that may be the same as the later trucks, but don't know for a fact. Real problem is shipping . Have you checked to see if Carpenter has the correct one for your truck?
Rich
Rich
Re: ARRRRGGGGG!!!!
There is considerable difference in the front to rear dimensions between the two headliners, around 2" IIRC.
. I thought I had a print of the old style, but, as usual, I am unable to find it!
Paul
. I thought I had a print of the old style, but, as usual, I am unable to find it!
Paul
The Ford Orphanage
Life's too short for boring vehicles!
My quest to develop a universal solvent is held up by the lack of a storage container.
Paul
Life's too short for boring vehicles!
My quest to develop a universal solvent is held up by the lack of a storage container.
Paul
- unibody madness
- Posts: 2147
- Joined: December 4, 2008, 4:33 pm
- Location: Paradise,CALIFORNIA 95969

Re: ARRRRGGGGG!!!!
I was unable to find the C/L ad in Ca.
I remember someone offering the early pattern, but can not find it. I will keep looking.
Thanks Guys
I remember someone offering the early pattern, but can not find it. I will keep looking.
Thanks Guys
Turk build thread at:
http://slick60s.com/viewtopic.php?f=32&t=18944
It does not matter what you think, it only matters what you do about it!
http://slick60s.com/viewtopic.php?f=32&t=18944
It does not matter what you think, it only matters what you do about it!
