glennz wrote:just purchased a 64 f100 stepside
http://s166.photobucket.com/albums/u96/ ... d%20truck/
purchased with intent of a drag project, back half, IFS front, cage, 545 big block ford, c-6, and as much juice as it takes me to get into the 9's
truck is in good condition
i own and operate a small hot rod shop in south east lower michigan
Dr. Z's Rod Shop, i have been racing and working on cars for near 25 years
at this point the only question i have is who has put an IFS in front of one of these trucks and who's kit was it, i do not feel safe taking the factory solid axle upto these speeds
thanks
glenn z
Should all short stepsides be crushed ??
Every style has its place. Ask my buddy Glenn what he would do with a stepside
Someday I'll get another slick 


- mikecarson
- Posts: 596
- Joined: July 9, 2006, 5:59 am
- Location: Richland, Texas
- Contact:
My 62 is a short Flareside. Carried 10 rolls of barb wire, 150 T-posts, and 10 6' cedar posts for a fence home from Corsicana, trip of 30 miles. Still had the 223, 3spd then.
Put a 5th wheel hitch in it, and logged 300.000 miles chasing back and forth, north and south, working contract aviation. Used up several 223/262 engines. Put in a 390, and put 150,000+ on that before I gave it a rest.
Pretty good shorty.
Put a 5th wheel hitch in it, and logged 300.000 miles chasing back and forth, north and south, working contract aviation. Used up several 223/262 engines. Put in a 390, and put 150,000+ on that before I gave it a rest.
Pretty good shorty.
Mike C
64 CC, Crown Vic project
62 CC
67short 94 F150, 433W
Life should NOT be a journey to the grave with the intention of arriving safely in an attractive body, but to skid in sideways - body worn out and screaming: Woo Hoo, what a ride!"
64 CC, Crown Vic project
62 CC
67short 94 F150, 433W
Life should NOT be a journey to the grave with the intention of arriving safely in an attractive body, but to skid in sideways - body worn out and screaming: Woo Hoo, what a ride!"
- Johnny Canuck
- Posts: 8291
- Joined: April 9, 2006, 11:14 pm
- Location: Edmonton, Alberta.

Re: Should all short stepsides be crushed ??
Doc Pepper wrote: In fact, when I was fat, I was so squeezed behind the wheel of a slick that I farted while driving but didn't hear the sound until I got out.
Thanx Doc. that was the funniest thing I heard today, and I live in Canada, where we are all funny. We export the guys who are NOT funny to you guys, and you call them Comedians. You should hear our politicians.. 1,000,000 laughs.
Is George Bush Canadian?
It's a race.. Will hell freeze over or will JC finish his truck first. Stay tuned..
When I was a kid, I thought stepsides were just plain funny lookin'. Looks like Ford had a bunch of leftover beds from '55 F100's & decided to use 'em up! Nothing about the beds matched anything else on the truck. Then I saw one that someone slapped a 4x4 frame under
THAT looked cool!
As I creep ever nearer my golden years, they are finally growing on me. Would I buy one today? Sure, why not, stepsides needs some luvin' too, ya know.
As I creep ever nearer my golden years, they are finally growing on me. Would I buy one today? Sure, why not, stepsides needs some luvin' too, ya know.
My "Slickitis" affliction began here...

66 F100 CC/65 F100 CC/66 F250 CC
If it starts to rain, they'll tax the splash.
If you want to fish, they'll tax the bass.
If you plant a yard, they'll tax the grass.
If you don't play nice, they'll fine your *$#!

66 F100 CC/65 F100 CC/66 F250 CC
If it starts to rain, they'll tax the splash.
If you want to fish, they'll tax the bass.
If you plant a yard, they'll tax the grass.
If you don't play nice, they'll fine your *$#!
- FORDMANLCRACKEL
- Posts: 1237
- Joined: July 11, 2006, 9:48 pm
- Location: williamston, n.c.
- Contact:

Ya just have to stack the load higher thats all.
Lonnie
Lonnie
The most rewarding job i ever had was being a dad.
1988 Ranger Build http://s275.photobucket.com/albums/jj31 ... %20RANGER/
1988 Ranger Build http://s275.photobucket.com/albums/jj31 ... %20RANGER/
Re: Should all short stepsides be crushed ??
Now come on... we don't drive bicycles drunk... we drive snowmobiles! Although come to think of it, I did crash my son's scooter...Doc Pepper wrote: A short stepside would flip over faster than a beer drinking Canadian on a bicycle.
Guess who finally figured out the emoticons???
Weird is relative, and my relatives are really weird!!
Re: Should all short stepsides be crushed ??
I don't get it. Why would a beer be drinking Canadian?Doc Pepper wrote: A short stepside would flip over faster than a beer drinking Canadian on a bicycle.
64 Ford F100 Flareside
68 Ford XL Convertible
87 Ford Thunderbird Turbo Coupe
94 Ford Mustang GT Convertible
02 Ford Mustang GT
18 Ford F150 XLT
68 Ford XL Convertible
87 Ford Thunderbird Turbo Coupe
94 Ford Mustang GT Convertible
02 Ford Mustang GT
18 Ford F150 XLT
-
ICEMAN6166
- Posts: 11470
- Joined: July 11, 2006, 11:28 am
- Location: Dove Creek, Co. elevation 6842

shortbeds of whatever style are just too short.
the flareside had an option for mounting a tire on the outside by using a bracket and having a fender with a divot or a bite taken out to accomodate the tire,
4x8 sheets of wood and sheetrock fit in a lwb flareside laying flat and closing the tailgate too.
they were quite useful to farmers and tradesman because the steps make it easy to get stuff out of the bed or have a couple guys standing on them for a short ride across a farmers field or jobsite.
the flareside had an option for mounting a tire on the outside by using a bracket and having a fender with a divot or a bite taken out to accomodate the tire,
4x8 sheets of wood and sheetrock fit in a lwb flareside laying flat and closing the tailgate too.
they were quite useful to farmers and tradesman because the steps make it easy to get stuff out of the bed or have a couple guys standing on them for a short ride across a farmers field or jobsite.
1966 F250 4x4
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
- dotcentral
- Posts: 1341
- Joined: August 18, 2006, 5:13 pm
- Location: Charlotte, NC
Seems like up until 1955 all trucks where basically all stepsides/flairsides, except for the sort of ute-looking cars with the small tacked-on truck beds. I think GM with the Cameo and whatever the GMC version was named were the first with the wide side bed, and Ford and Dodge quickly followed. Guess it's just evolution. Someone comes out with something, then you wonder how we got along without it. Power steering, disc brakes, etc.
I sort of remember that used to be stepsides/flairsides were cheaper to buy. I have seen a few older longbed flaresides in the scrap yards that were ex-city, state, military trucks. I always guessed because the were a little cheaper. I think Ford discontinued the flareside in the mid 70's for a few years, but brought it back because people wanted them.
I had an Uncle with a really nice 77 or there abouts shortbed flairside, 302 with the 4 speed o/d, it was pretty cheap brand new. He drove a log truck, so guess he wanted something small for around town.
could be wrong on some of this, just going from a sometimes cloudy memory.
I sort of remember that used to be stepsides/flairsides were cheaper to buy. I have seen a few older longbed flaresides in the scrap yards that were ex-city, state, military trucks. I always guessed because the were a little cheaper. I think Ford discontinued the flareside in the mid 70's for a few years, but brought it back because people wanted them.
I had an Uncle with a really nice 77 or there abouts shortbed flairside, 302 with the 4 speed o/d, it was pretty cheap brand new. He drove a log truck, so guess he wanted something small for around town.
could be wrong on some of this, just going from a sometimes cloudy memory.
Driver: 71 F100 Shortbed: Disc swap, 5.0 HO EFI & AOD
Project Vehicle/Mild Custom: 66 F100 CC longbed: Sold
Project Vehicle/Mild Custom: 66 F100 CC longbed: Sold
-
Garbz
Doc, you can crush the one I have if it makes you feel better $200 and come and get it, lol.
1964 F 100 - I am going to do "something" with it.......
viewtopic.php?f=32&t=15942
1987 Mustang LX Convertible, 2.3 Auto - cruiser.
1994 F 150 XLT 2WD
~ Yes - I adopted another cat..............
Cam L Milan,
You'll be missed my friend.
viewtopic.php?f=32&t=15942
1987 Mustang LX Convertible, 2.3 Auto - cruiser.
1994 F 150 XLT 2WD
~ Yes - I adopted another cat..............
Cam L Milan,
You'll be missed my friend.
- mikecarson
- Posts: 596
- Joined: July 9, 2006, 5:59 am
- Location: Richland, Texas
- Contact:
On a good day, we get 4 stations on the antenna, no cable (monopoly thinks they got me over a barrel?)Doc Pepper wrote: We'll probably discover that all of them have cable TV with all the extra stations.
Mike C
64 CC, Crown Vic project
62 CC
67short 94 F150, 433W
Life should NOT be a journey to the grave with the intention of arriving safely in an attractive body, but to skid in sideways - body worn out and screaming: Woo Hoo, what a ride!"
64 CC, Crown Vic project
62 CC
67short 94 F150, 433W
Life should NOT be a journey to the grave with the intention of arriving safely in an attractive body, but to skid in sideways - body worn out and screaming: Woo Hoo, what a ride!"
- Johnny Canuck
- Posts: 8291
- Joined: April 9, 2006, 11:14 pm
- Location: Edmonton, Alberta.

- needmoretime
- Posts: 239
- Joined: July 12, 2006, 10:52 pm
- Location: Middletown,Delaware
Now this post hit a nerve!
My STEPSIDE was originally bought for the following reasons in 1965. The owner needed a big engine (352) to pull a horse trailer. He wanted to get better mileage so he added a 3spd overdrive. The bed was used to haul stay/hay for the horses. He did not need much more than that.
I think the question you should be asking is why todays trucks are all pretty and yet the most refuse to use them because they don't want to dirty the bed and scratch them up. I think trucks today have lost there rough toughness and charachter. My buddy drove an 03 silverado thru a parking lot after a rain storm and lock it up.
Just my thoughts
My STEPSIDE was originally bought for the following reasons in 1965. The owner needed a big engine (352) to pull a horse trailer. He wanted to get better mileage so he added a 3spd overdrive. The bed was used to haul stay/hay for the horses. He did not need much more than that.
I think the question you should be asking is why todays trucks are all pretty and yet the most refuse to use them because they don't want to dirty the bed and scratch them up. I think trucks today have lost there rough toughness and charachter. My buddy drove an 03 silverado thru a parking lot after a rain storm and lock it up.
Just my thoughts
- needmoretime
- Posts: 239
- Joined: July 12, 2006, 10:52 pm
- Location: Middletown,Delaware
