Tools lost, tools found, got any stories to tell???

A place for discussion of off topic subjects. Pretty much anything goes - just keep it civil, please!

Moderators: Casey 65, Kid

cdherman
Posts: 1048
Joined: July 17, 2006, 6:36 pm
Location: Parkville MO (KC)

Tools lost, tools found, got any stories to tell???

Post by cdherman »

A thread in the truck area made me think about this topic as a thread, so here goes.

I was at the local pick-n-pull yesterday and I found a nice 9/16" wrench laying on the inner fender of the truck I was scavenging. I had to think how my dad says, "You can never have too many 9/16" wrenches". My dad and grandpa always used to wait for the Sears Year End Clearance or whatever and buy lots of the stuff they knew they would lose.

Second memory: My granddad was working on the well, as the story goes. In western Kansas, its 70-100 feet down and the pump is lowered into the well. You don't go down there -- usually filled with bad air. Anyhow, he fumbled the 9/16" and down she went. It was part of a nice set of combo wrenches he bought in the 40's -- after the war I suspect, as they were chromed and chromed well.
Well, many years later the well was silted and they bucketed it out. What do you know, but a wrench turns up. It looked good as the day she went down.

My dad has my great grandfathers saw and hammer on the wall and my grandfathers set of wrenches in a box. The set is complete, even the 9/16".

Tools are like old friends -- you hope to never lose them, and it hurts a little when you do......

Got any stories??????
1965 F-100 240 Autolite 1101, Disk brake dual master upgraded, swapped over to C4 and powersteering. Bought by my Dad new in March 65'

1683

Planned/considered upgrades:
Perhaps power brakes, 300 I6 motor and JUST maybe, AC!
User avatar
Johnny Canuck
Posts: 8291
Joined: April 9, 2006, 11:14 pm
Location: Edmonton, Alberta.
Canada

Post by Johnny Canuck »

Got a beaut, that spawned my name on FTE. Not exactly a wrench tho.
Got my nice shiny blue painted engine back from the rebuilders, thinking whooohoo :woohoo:, in a month or two I could have the Merc on the road :roll: :lol:

Tested out the new shiny stainless bolt I got for the distributor retainer plate.. and whoopsee.... down in the hole she went.
Little did I know I would have to remove the oil pan 2 more times later, but I started a trend that day. :?
It's a race.. Will hell freeze over or will JC finish his truck first. Stay tuned..
Phil
Posts: 2125
Joined: June 1, 2007, 9:37 pm
Location: toledo

Post by Phil »

I cranked my 460 over with the 1/2" wratchet still on the crank pulley.

Yeah that tool came back to me.
Someday I'll get another slick :(
Image
User avatar
Ford4jack
Posts: 707
Joined: July 22, 2006, 7:56 am
Location: Tennessee

Post by Ford4jack »

Had a pair of finger pinching sears vice grips that I liked to never lost.
No matter where I tossed them or who I loaned them to they just kept returning to the tool box.
Z-MAN
Posts: 213
Joined: May 21, 2007, 9:28 pm
Location: Houston

Post by Z-MAN »

Always been lucky finding tools, In fact my wife and kids tease me, because i will find them on the road and stop and pick them up. I found a ratchet under an old mustangs back seat one time. Last swap meet we went to down here, i bought a toolbox with wrecnches and sockets for 51 bucks. Skip got a good deal on a starter that day too :D


Z
User avatar
Macon ACE
Posts: 244
Joined: August 7, 2007, 11:41 am
Location: Heart of GA
United States of America

Post by Macon ACE »

Yeah, 2 sorta: one old, one new.

When I was a kid I found a pair of vice grips in the street near our house. I was so excited because this would be my first tool! I ran home and showed it to my Mama. She told me that it probably belonged to the telephone lineman that had been working in our neighborhood all day. She said that I should go and find him and ask him if it was his. I did and it was. So long vice grips!

Monday evening I'm driving my truck around in a new neighborhood near my house when I see a nice extension ladder laying in the road. I also see some construction workers down at the end of the street. So I drive up and ask them if they're missing a ladder. They were and were very thankful. As I was driving away, one of the guys shouted, "Nice truck."

My Mama taught me well.

:)
64 Ford F100 Flareside
68 Ford XL Convertible
87 Ford Thunderbird Turbo Coupe
94 Ford Mustang GT Convertible
02 Ford Mustang GT
18 Ford F150 XLT
ras4434

Post by ras4434 »

In a "past lifetime" I was using my 66 to cut firewood to help pay the bills. I was stopped at the bottom of a long hill with a full load getting the load tied down. As I am on the passangers side tying the rope off. I hear a truck go by and hit a pot hole in the road as he raored up the hill. As I walk back to the other side to get in there is a small locked tool box sitting next to the drivers door on the ground. It is pretty banged up but intact. The truck I heard hit the pot hole must have lost the tool box. I never found the owner but still have most of the tools if I ever find him/her.
User avatar
Slick Fan
Posts: 4085
Joined: November 4, 2006, 5:09 pm
Location: UTAH...snow blows!

Post by Slick Fan »

I've found a couple nice channel locks & a pair of battery pliers wedged in the radiator supports of cars I've bought. I ended up unbolting the right fender from one car to get the battery pliers. :lol:
I found a Makita cordless drill in it's box in the road one day. It had been run over at least once, but I took it home anyway...worked great for about 3 years! :D

I've only lost a couple sockets myself...my kids have lost lots more than that. :x I ended up actually locking the garage for a few years there...good thing there was never a fire out there, because nobody would have been able to get to it. :lol:
My "Slickitis" affliction began here...
Image


66 F100 CC/65 F100 CC/66 F250 CC
If it starts to rain, they'll tax the splash.
If you want to fish, they'll tax the bass.
If you plant a yard, they'll tax the grass.
If you don't play nice, they'll fine your *$#!
User avatar
dwbr
Posts: 474
Joined: July 16, 2007, 4:23 pm
Location: Pasadena TX

Post by dwbr »

had someone break into my 77 f150 using a 3/4 in snap on break over bar, they apparently tossed it through the passenger wing vent window, and i guess the alarm went off scaring them away, glass was cheep and got a high dollar tool out of it
________
Rolls-Royce Phantom III
Last edited by dwbr on February 6, 2011, 11:54 pm, edited 1 time in total.
User avatar
ABA
Posts: 1770
Joined: September 23, 2006, 4:59 pm
Location: South Carolina

Post by ABA »

I lost my BUCK 501 pocket knife that I've had since '79 twice.

Once while fishing a pond in a canoe we decided to do some bank fishing.
Well I broke my line so I leaned my pole up against a tree to retie my hook.
After cutting the line with my BUCK I stuck the knife in the tree while I tied the knot.

On the way home we stopped to get something to drink and when I reached into my pocket. my knife was gone.
Went back to the pond and it was stil stuck in that tree.


Second time I lost it was when I was installing a stereo in my '74 E100 van.
It had an overhead console and I left my knife there after stripping some wires.
It was many months before I found it that time.

And yes I still carry that knife today. :lol:
'01 F150 Lightning
490RWHP
Gas Mileage? What's that?
Jerry
User avatar
ezernut9mm
Posts: 9141
Joined: July 21, 2006, 9:37 pm
Location: KCMO
Sweden

Post by ezernut9mm »

i used to work on a sod farm. we used to dig up all kinds of stuff while cutting sod. got a nice pair of vise grips and a 20ft log chain complete with both hooks out of the field like that.
always
"i believe i've achieved satisfaction".-bubbles
"should i be gettin" baked for this boys?"-bubbles


i could no longer keep "r.i.p.ing" all of our fallen brothers and sisters, so i say here, slick loads of love and much respect to all you beautiful people.
fmartin_gila
Posts: 1021
Joined: April 21, 2007, 9:58 am
Location: Mandurriao, Iloilo City, Philippines

Post by fmartin_gila »

I still have my BUCK knife that I carried as a backup in Vietnam in 65.
Fred
User avatar
FORDBOYpete
Posts: 850
Joined: July 21, 2006, 8:30 am
Location: East Central Florida USA

Post by FORDBOYpete »

I bought a running "scrapper" '65 SWB for parts wayback when hector was a pup. While I was sneaking it home I noticed whenever I stepped on the brakes, the right rear wheel went SCREEEEEEEEEEEEEEE but I didn't slow down. I carefully snuck home a backway avoiding any need to "stop". :shock:

I got 3 pairs of vise grips off the brake lines. 1 real rusty pr. & 1 slightly rusty pr. off front flexes & brand new "gennie" pair on L/R that was. He used them to crush the steel line, I guess so he could get it home maybe. I use rusty ones for welding & crap work, the new pair is in my plier drawer. :rotflmao:

But what really got me was the guy came by a week or 2 later to get his Vise Grip pliers Back. That was testicular fortitude IMO. I'd parted that slug & hauled carcass to a crusher before anything I owned caught any disease that had eaten the floor out of that 65 truck. . . . I told the guy I had a wreck on the way home. I had junked the truck. :roll:
So I didn't know anything about his pliers. . . {lie} :boohoo:

Anyway I learned to either look under everything before I buy or drive it, or I just use my trailer to haul it. O'course back then I didn't have a trailer, but I do now. :thumright:

While I'm on the subject of tools, I have a problem with tool thieves same as with rapists, pedofiles, wife beaters, murderers, et al. Stealing a person's tools is about as low life as anyone can get IMO. . . . in 1996 I lost over $15K worth during a break in. Yes they were insured, BUT many specialty tools I has were/are no longer available, or replaceable, like the socket set to take the Bezel Nut off a Windshield Wiper Transmission Shaft Housing. . . and the crack head junkie that took them is too stupid to realize what he had or what the tools were or were worth. . .

grrsign.gif Damn Doper Junkies
hunting.gif

FBp Bolt.gif
Change is the Only Constant
User avatar
Ford4jack
Posts: 707
Joined: July 22, 2006, 7:56 am
Location: Tennessee

Post by Ford4jack »

Back when I worked at the Deere dealership a interesting thing happened.
One Monday morning the shop truck was setting in the parking lot door open and blood all over the place.
The gate had been rammed open and there was a dent in one of the shop roll up doors.

Saturday all the shop bays were full except one.
Right at the end of the day I had pulled a dozer into it and barley had room to shut the door.
Guess someone had cased the place before I did that.
Don't know how fast they hit it but the dozer was knocked forward a few inches. evil_lol.gif
blackagatha
Posts: 2582
Joined: March 10, 2007, 12:49 am
Location: Arizona

Post by blackagatha »

haha

When I first started my 390, it had the wrench on the crank.... We heard a loud clank and stopped it, was inspecting, found it laying on the front xmember with the bolt unscrewed in the socket... Lucky it was in a situation to unscrew, not break off...

One time my dad came home raving about this "little tiny" wrench he found in the street, stopped his 18 wheeler Pepsi truck to get it... He took us out in the garage to see it, it's a chrome wrench about a foot and a half long, maybe 2" bolt size... weighs probably 15 pounds... It is incredible.

That guy that came to get his visegrips back was a bastard.... The fact that he let you drive it away like that is bad enough... let alone to have the gall to expect to get them back....
Aggie came with a big Instant-Rebate when I bought her.
There was a NICE vise-grips as the driver's window handle, a Big Craftsman screwdriver as "The Key", about $5 worth of change scattered in every conceivable spot, and a big giant file stuck in the goop under the seat.
'63 with 390 & lots of juice. But never enough. Always want more.
ImageImageImage
User avatar
Uncle Skip
Posts: 4695
Joined: July 15, 2006, 8:30 pm
Location: Pearland, Texas
United States of America

Post by Uncle Skip »

You want a TRUE story?
I started working on car stuff in the very early 60's, starting with a 1951 Chevy sedan my grandfather "sold" me.
The Colonel (my dad) said he would pay my insurance but I had to fix and maintain the car. It had a stripped timing gear that took me several weeks to figure out and repair, along with the attendant busted knuckles and loss of blood.
Then, I got a part time job working on Evenrude outboard motors and started buying tools. The Colonel couldn't screw in a light bulb with directions and adult supervision, had no tools, and so I needed my own.
My first set of wrenches were Craftsman combination boxes and I still have them today.
So the story is:
In all my years I've only ever lost one tool in my life. I've loaned tools that were never returned but I only lost one tool.
A freaking screwdriver.
Right after I got home from sunny SouthEast Asia, I opened a small sports car shop in Dallas and I had customers from as far away as Oklahoma City and New Orleans.
One rainy day in late November this seriously stacked and dressed race horse came in with a new Datsun 240-Z (yeah, I'm that old) with a serious miss that she said the dealership couldn't fix.
Well, to make a long story short, she had an ignition leak. But to make things look good, I got my long #1 Snap-on screwdriver out to "adjust" the carburetors.
I was a stud mechanic and she was impressed.
Unfortunately for me, she was interested in what I was doing and when she leaned over to watch, her blouse poped open and the "girls" came immediately into view.
Thank you Jesus.
Or maybe not.
I lost my focus.
I lost my grip.
Hell, I probably forgot what day it was.
I set the screwdriver on the inner fender.
I mumbled several things about the car, trying not to be obvious about her rack.
I closed the hood, she paid me and then drove off with my screwdriver....... never to be seen again (the screwdriver).
Her name was Twyla and I had her for a customer for two more years but I never saw that damn screwdriver again.
That screwdriver cost me $12.00 American in 1970, I've obsessed over it every day since, and as a result I've never lost another tool.
Twyla still has my vote for the all time female ultimate distraction award.
I'm Uncle Skip, I'm a cheap Scotsman, and I'm still a Tittie idiot.
ROTFLMBAO
:oops:
I'm not arguing with you. I'm just explaining why I'm right.
Pardon me. Does your deaug bite?
ICEMAN6166
Posts: 11470
Joined: July 11, 2006, 11:28 am
Location: Dove Creek, Co. elevation 6842
Poland

Post by ICEMAN6166 »

:laughing:
rack one up for Uncle Skip.
1966 F250 4x4
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
User avatar
Fanatic
Posts: 1568
Joined: July 14, 2006, 11:39 pm
Location: Leesport, PA

Post by Fanatic »

Skip,
That must have been one "FINE" screwdriver !

Since you STILL remember it nearly 40 years later.

Thanx for the mental image.

Tim
INEPTOCRACY: (in-ep'-toc-ra-cy) : a system of government where the least capable to lead are elected by the least capable of producing, and where the members of society least likely to sustain themselves or succeed are rewarded with goods and services paid for by the confiscated wealth of a diminishing number of producers.
blackagatha
Posts: 2582
Joined: March 10, 2007, 12:49 am
Location: Arizona

Post by blackagatha »

haha skip, I think you have all of us beat... that's a good story... If I ever have to lose a prized tool, I hope it's in a way to be proud of...

you was titulated over her tits.

I can imagine why you would be upset about the screwdriver... They don't make stuff as good as they used to... and if they do, it costs 10 times too much... But good stuff comes at a price, we all know that...
'63 with 390 & lots of juice. But never enough. Always want more.
ImageImageImage
GLindley
Posts: 562
Joined: July 11, 2006, 9:47 pm
Location: Springfield, MO

Post by GLindley »

Well, there goes our "G" rating. Wish Lance was here...
Gene
1961 Intregal cab SWB 223 (getting 302 & TIB)
1969 LWB 302 automatic (Donor for the '61)
2000 F150 XLT SWB (Daily Driver)
Post Reply