For the wheelbase codes listed on the Canadian warranty tags, there's a breakdown in the Master Parts Catalog (MPC) that shows what codes match up to what wheelbases. However, several of the wheelbases for 1965 trucks don't seem to be shown in the MPC chart. There are a couple that are within an inch, but I don't want to list those codes on the tutorial page if they pertain to other truck models and not directly to F100/F250/F350 trucks.
Here's the section of the MPC which shows the codes:

So...I was able to match up the following:
Code 15: 114.8 (F100 SWB pickup)
Code 28: 128.8 (F100 LWB and F250 pickup)
Code 32: 132 (F350)
However, the known wheelbase dimensions for the F250 crewcab (147") and the F350 crewcab (152") aren't shown in this MPC chart. You'll notice that the code 46 shows a 146" wheelbase (one inch short of the F250 crewcab's 147" WB) and there's also a code 53 that shows a 153" wheelbase (one inch longer than the F350 crewcab's 152" WB). There isn't any other codes that come close.
So what am I missing? I know I've found a lot of errors in the MPC in the past, but I'm thinking surely the factory parts manual wouldn't have gotten these wrong. Are the WB figures for the crewcabs rounded up/down?



