NEED HELP!!

The place to talk Slicks. All we ask is that discussion has something to do with slicks...

Moderators: Casey 65, Kid

Post Reply
slixty6
Posts: 16
Joined: January 25, 2016, 7:17 pm
Location: Nacogdoches TX
United States of America

NEED HELP!!

Post by slixty6 »

I'm in the process of replacing the bearings and seals on my 66 swb f100. It has the 9 inch rear end, and from all the research I've done, I believe they are the big bearing old style type.

My question is, where is a good place to get these parts? Do parts stores carry them, or order online?

What information do I need to get the correct ones? I ask this because after googling this, all I can find is bearings by measurements.

Also, when I pulled the axles, the gear oil looked like mud. Will the center section be ok with just a good cleaning?

Thanks for any help. I do research a lot before bothering others, but when I can't find the answer, well.....
User avatar
Michelle
Posts: 2438
Joined: June 23, 2009, 7:42 pm
Location: Smithville, Texas
United States of America

Re: NEED HELP!!

Post by Michelle »

I bought a new set just a couple of years ago at the local mom and pop parts store here in my hometown. You shouldn't have any problem finding them.
Michelle

Democracy is two wolves and a sheep voting on what to have for dinner. A Republic is a well-armed sheep.

I hope I always stay crazy, because I know if I ever become sane, it will drive me crazy.
slixty6
Posts: 16
Joined: January 25, 2016, 7:17 pm
Location: Nacogdoches TX
United States of America

Re: NEED HELP!!

Post by slixty6 »

I was wondering if my local parts places carried them. Thanks Michelle!!
LM14
Posts: 1755
Joined: August 22, 2009, 10:44 pm
Location: Bloomfield, Iowa
United States of America

Re: NEED HELP!!

Post by LM14 »

Give the center section a good cleaning and visually inspect all the gear teeth and bearings you can see as you slowly turn it over. Sometimes a good flush and new grease can buy a lot of miles. If the teeth show any pitting, I would replace everything.

Any parts store should be able to get the bearings and seals. Nothing special.

SPark
1932 Ford 5 window coupe. 302/C4
1962 8V-390/C6 Unibody Short Bed Soon to be Big Window - The Lincoln that never was
2013 F150 Super Crew Eco Boost 4x4
2015 Ford Edge for the little lady, because she said so!
2007 Mustang GT, 4.6-3V/5 Speed. Only 8680 miles on the clock.

More toys, I need more toys!!!
Post Reply