Just to keeps new posts coming, I thought I'd relay a story about my horn fix this last weekend...
For the first 22 years I owned my truck, I used an aftermarket horn button below the dash, wired directly to the horn. Last summer, I re-wired the truck, taking most of the summer to do it. When I finished the wiring, the horn worked through the contacts in the column, so I bolted the steering wheel on. Once on, the horn didn't work. In that it was the end of summer, and I just wanted to drive it, I didn't worry too much about debugging it, since it was being put away for the winter shortly. Fast forward to this spring, and this last weekend, I decided enough was enough. I pulled the wheel, only to measure and figure out that the contact was too short. I had two different length contacts, and the short one was below the wheel, and the long one through it. So, I swapped locations, and after installing the wheel, found the short contact wouldn't fit through the hole in the wheel. My wife unknowingly donated a nail file, and after about 10 minutes of filing, the contact fit. Reinstalled the horn spring and button, and presto-walah, I have a working horn on the column for the first time in 23 years!
horn works now!
Re: horn works now!
"Better late than never"
.
.
.
'' I think what scares me the most about you guys is that I understand you '' ..... KID
'' lookin good, a little paint adds at least 100hp!'' ....... COOTER
'' well an old guy can dream cant he? ''............ICEMAN
''I would donate organs before selling my slick''........ HOOFBEAT RACER
.
.
'' I think what scares me the most about you guys is that I understand you '' ..... KID
'' lookin good, a little paint adds at least 100hp!'' ....... COOTER
'' well an old guy can dream cant he? ''............ICEMAN
''I would donate organs before selling my slick''........ HOOFBEAT RACER
Re: horn works now!
30 yrs.later my 350 still has no horn,probably just as well.....not pissing people off.....I'd be blowing that thing every 30 seconds in this town......
___________________________________
"DW JONES TRUCKING"
WHISKEY HAULED,LIES TOLD AND WIDOWS WOO'ED......
"By appointment only"
"DW JONES TRUCKING"
WHISKEY HAULED,LIES TOLD AND WIDOWS WOO'ED......
"By appointment only"
- unibody madness
- Posts: 2147
- Joined: December 4, 2008, 4:33 pm
- Location: Paradise,CALIFORNIA 95969

Re: horn works now!
Good going... I rebuilt or modified the horns/steering wheels on two of my Unibodies. both worked great. now the horn honks when I have the turn signal on and turn the corner????? It seems to be grounding when the contact point touches the signal cancelling flippers.
Turk build thread at:
http://slick60s.com/viewtopic.php?f=32&t=18944
It does not matter what you think, it only matters what you do about it!
http://slick60s.com/viewtopic.php?f=32&t=18944
It does not matter what you think, it only matters what you do about it!
- slixtyfive
- Posts: 458
- Joined: January 19, 2007, 2:03 pm
- Location: Eastern Iowa

Re: horn works now!
Madness's comment about the horn honking when he has the turn signal on reminds me - have you all seen the video where a guy 'pranked' his buddy by wiring the horn in his car to the brake pedal??? Hilarious!!! 
"It's better to be gone but not forgotten, than to be forgotten but not gone." Gary Allan
