Gonna install all three on the 250 this weekend,l heard that u-joints need to be installed in a specific relation to each other....anyone have some experience on this.....
Thanks
Dan
U-Joint Question
U-Joint Question
___________________________________
"DW JONES TRUCKING"
WHISKEY HAULED,LIES TOLD AND WIDOWS WOO'ED......
"By appointment only"
"DW JONES TRUCKING"
WHISKEY HAULED,LIES TOLD AND WIDOWS WOO'ED......
"By appointment only"
Re: U-Joint Question
The u-joints have to be in line or what they call in the same phase. Replacing the u-joint won't change that but pulling the driveshaft apart at the splines and turning it before splipping it back together will. If you plan on separating the two pieces make sure the yokes/u-joints are lined up when you slip it back together or mark them before disassembly so you can reassemble the same way.
Bill
1966 F100 Camper Special, now a short bed 4x4.
https://www.ford-trucks.com/forums/1644 ... build.html
1966 F100 Camper Special, now a short bed 4x4.
https://www.ford-trucks.com/forums/1644 ... build.html
Re: U-Joint Question
This isn't drive shafts ... but you will get the idea
https://m.youtube.com/watch?v=9unvQ-xf_XA
Neat video that mkes it simple to understand driveline angle
And phasing is important
https://m.youtube.com/watch?v=Idk3BVDVHq4
https://m.youtube.com/watch?v=9unvQ-xf_XA
Neat video that mkes it simple to understand driveline angle
And phasing is important
https://m.youtube.com/watch?v=Idk3BVDVHq4
.
.
.
'' I think what scares me the most about you guys is that I understand you '' ..... KID
'' lookin good, a little paint adds at least 100hp!'' ....... COOTER
'' well an old guy can dream cant he? ''............ICEMAN
''I would donate organs before selling my slick''........ HOOFBEAT RACER
.
.
'' I think what scares me the most about you guys is that I understand you '' ..... KID
'' lookin good, a little paint adds at least 100hp!'' ....... COOTER
'' well an old guy can dream cant he? ''............ICEMAN
''I would donate organs before selling my slick''........ HOOFBEAT RACER
- FarmMotorSports
- Posts: 451
- Joined: November 13, 2010, 6:55 pm
- Location: KS, Lawrence

Re: U-Joint Question
It is considered good practice to put u-joints in a position that will compress the Opening for the grease zerk when the vehicles moving forward... YMMV.
61 F250 Unibody
5.9 Ford Diesel / Allison auto
& 4WD
5.9 Ford Diesel / Allison auto
& 4WD
