Bosch Tachometer / Painless wiring

The place to talk Slicks. All we ask is that discussion has something to do with slicks...

Moderators: Casey 65, Kid

Post Reply
Jerry D
Posts: 389
Joined: November 29, 2006, 4:38 pm
Location: Woodstock, Il
United States of America

Bosch Tachometer / Painless wiring

Post by Jerry D »

I'll post this and see if anyone replies before I call the Painless wiring help line...

I bought a Bosch tachometer, and it's wanting me to run power to it that's only hot when the key is in the run position, and not OFF or Accessories key position. I'm trying to figure a good source wire to tap into. Ideas?
User avatar
redstone65
Posts: 139
Joined: August 30, 2017, 9:14 pm
Location: Birmingham, AL
United States of America

Re: Bosch Tachometer / Painless wiring

Post by redstone65 »

The ignition wire should give you that right? The one that comes from the key and Y's into the distributor and the starter solenoid.
Dave

1965 F-100 Flareside (240 6-cyl)
3 speed. Former military truck.
Jerry D
Posts: 389
Joined: November 29, 2006, 4:38 pm
Location: Woodstock, Il
United States of America

Re: Bosch Tachometer / Painless wiring

Post by Jerry D »

Thanks for the reply. That's kinda what I was thinking. Called Painless anyway, and they said picking up the feed for the gages would work better. At the end of the day, I need to pick up a power feed for the tach light, so I can just pair/wire tie the two together, since they're coming from the same proximity.
Post Reply