slip yoke leak

The place to talk Slicks. All we ask is that discussion has something to do with slicks...

Moderators: Casey 65, Kid

Post Reply
User avatar
redstone65
Posts: 139
Joined: August 30, 2017, 9:14 pm
Location: Birmingham, AL
United States of America

slip yoke leak

Post by redstone65 »

I'm going through and replacing all of the leaking seals and gaskets in the engine and drivetrain (did timing cover this past weekend). I noticed yesterday the slip yoke seal on the trans extension housing is leaking pretty bad. It's a 3.03 trans. Is that a readily available part?
Dave

1965 F-100 Flareside (240 6-cyl)
3 speed. Former military truck.
slick4x4
Posts: 5725
Joined: April 19, 2008, 10:01 pm
Location: kipp kansas
United States of America

Re: slip yoke leak

Post by slick4x4 »

Should be ... just a seal
.
.
.
'' I think what scares me the most about you guys is that I understand you '' ..... KID
'' lookin good, a little paint adds at least 100hp!'' ....... COOTER
'' well an old guy can dream cant he? ''............ICEMAN
''I would donate organs before selling my slick''........ HOOFBEAT RACER
User avatar
unibody madness
Posts: 2147
Joined: December 4, 2008, 4:33 pm
Location: Paradise,CALIFORNIA 95969
United States of America

Re: slip yoke leak

Post by unibody madness »

While you are at it, my drive line guy put my yoke on a lathe and polished it, now no need to worry about eating up the new seal.
Turk build thread at:
http://slick60s.com/viewtopic.php?f=32&t=18944

It does not matter what you think, it only matters what you do about it!
Lowell
Posts: 751
Joined: August 21, 2006, 8:01 pm
Location: Southern Indiana
United States of America

Re: slip yoke leak

Post by Lowell »

Not sure about your tx ,but I think mine has a bushing behind the seal. its best to replace it while your at it,if its worn, the new seal won't last long.
User avatar
Toyz
Posts: 4334
Joined: March 22, 2011, 6:23 pm
Location: Baja Houston Taxes
United States of America

Re: slip yoke leak

Post by Toyz »

Lowell wrote:Not sure about your tx ,but I think mine has a bushing behind the seal. its best to replace it while your at it,if its worn, the new seal won't last long.
Yep, that is the likely cause of seal failure.
The Ford Orphanage
Life's too short for boring vehicles!
My quest to develop a universal solvent is held up by the lack of a storage container.
Paul
Post Reply