300 flywheel ring gear tooth count

The place to talk Slicks. All we ask is that discussion has something to do with slicks...

Moderators: Casey 65, Kid

Post Reply
rwhistles
Posts: 553
Joined: October 15, 2006, 7:42 pm
Location: winter haven, Florida
United States of America

300 flywheel ring gear tooth count

Post by rwhistles »

300 inline 6 manual trans np 435. whats the flywheel ring gear tooth count for a 66?

Tried several different searches with no luck
1961 F350 pick up
1962
1963
1964
1965
1966 F350 camper
9Fingers
Posts: 189
Joined: September 26, 2015, 8:14 pm
Location: Virginia
United States of America

Re: 300 flywheel ring gear tooth count

Post by 9Fingers »

I just went through this with a 1973 300 six block, small block bellhousing from a 65, np435 4 speed transmission from a 78 F150 4x4. The old flywheel had cracks in it. I replaced it with a new 164 tooth flywheel, new clutch and pressure plate. Used original stater, all works fine.
Always know where you will be, when you get where you're going - Jerry Clower
rwhistles
Posts: 553
Joined: October 15, 2006, 7:42 pm
Location: winter haven, Florida
United States of America

Re: 300 flywheel ring gear tooth count

Post by rwhistles »

should have figured this out for myself. thanks for that info.
1961 F350 pick up
1962
1963
1964
1965
1966 F350 camper
Post Reply