The FoMoCo I removed looked like this:

The new one from NAPA looks like this:
I'm no water pump expert, but how can this function properly without holes in the impeller for block-side suction?
I've started overheating since doing this change. My first thought was bad thermostat, so I removed it. Truck still gets up to about 175 with no thermostat, which seems high. So, I bypassed the heater core with a straight loop of hose and still gets up to about 175. Heater core is only a few months old and flushes clear, but just being thorough. I'm now wondering if this water pump is garbage since the only thing in the loop now is water pump and radiator. The pump doesn't leak, but maybe it's just not pushing enough coolant with that funky design. Radiator has some corrosion inside but when I flush it I get plenty of flow and it has no detectable leaks.
Any ideas or thoughts?


