non slick question/96 subaru outback

A place for discussion of off topic subjects. Pretty much anything goes - just keep it civil, please!

Moderators: Casey 65, Kid

Post Reply
willy3486
Posts: 817
Joined: July 11, 2006, 10:31 am
Location: Smithville TN

non slick question/96 subaru outback

Post by willy3486 »

I am in the market for a car. I have found a 96 subaru outback station wagon. I really like station wagons because they are handy. It is all wheel drive I think. It has a automatic transmission and then another shifter that may be for a 2 to a 4 wheel shifter. I am not familiar with these. I started it this morning and it kind of sputtered at first. It ran good but ran like one that had not been started,it didn't miss but was not 100 percent smooth. I looked at a few others and came back to this one and stared it and the car ran better and smoother. The guy said he hardly started it and it would do that. He said when it was started often it would run smooth. It has 200k miles on it and for only 2100 bucks. I have a few questions on these.
Does this sound like a good deal?

How hard are they to work on? I do most of the stuff myself but leave major engine and transmission stuff to a mechanic.

How hard are they to get parts, can you get them at most chain store parts store?

How many miles per gallon could I get?

With this high mileage how many miles more can I get?
Could I get another 100k to 200k?
If I could get another 100k and then have the engine rebuilt that would be ok.

It has a towing hitch,I have a small scotty 13 ft camper thats less than 1000 pounds would it tow it?

Any other comments I would appreciate. Thanks in advance.
fmartin_gila
Posts: 1021
Joined: April 21, 2007, 9:58 am
Location: Mandurriao, Iloilo City, Philippines

Post by fmartin_gila »

My 2nd wife had one with the automatic, but that would have been in about 1979, so they prolly are somewhat better now. The main problem was the automatic tranny, had it rebuilt IIRC about 3 times under warranty, and was still messed up. Got rid of it at about 30,000 miles cause of the tranny.
Can't offer any better advice, cause I havent looked at that brand since getting rid of that little junker.
Fred
User avatar
DV65CustomCab
Posts: 1497
Joined: July 18, 2006, 4:23 pm
Location: Elizabethtown, PA
United States of America

Post by DV65CustomCab »

Subaru owner here. :)
Is it a Legacy Outback, or an Outback Sport (Impreza)?
I did not think they had the Outback in 1996. Found out I'm wrong. Here is an excellent link for Subaru info: http://www.cars101.com/outback.html
The engine is the 2.5. It is recommended you run it on premium fuel as they have a fairly high compression ratio. Mileage? I would expect in the mid-20s. The slushbox will keep you out of the 30s, I'm pretty sure. The 2.5 in that one I believe is the DOHC (but what I call the 'quad cam'), with two camshafts per side. Timing belt replacement on them is essential, and should be done every 90,000 miles at a minimum. If it comes with no service records have it done immediately, as it is an interference engine should the belt break.
The engine should be quiet at idle, a little machinery noise like a sewing machine is okay but no tapping. If it's noisy, it probably hasn't been well maintained and is sludged up.
I'm not sure what the button on the shifter is for...I thought by 1996 all Subarus were full time AWD but I could be wrong (again).
Ours has about 212,000 on it. It has required very little service. In the last ten or more years we've owned it I've had to replace the ignition switch, cam sensor, cup holder, oil pump (leaked), plug wires, valve cover gaskets, a/c compressor (bad clutch)...I think that's it. The rough startup may be plugs or plug wires. If it's got the original wires I'd replace them. I've never put rear brakes on ours! These cars are very durable. You do have to watch the automatics (like any auto trans, really). They have some type of clutch deal that does not tolerate, say, different size tires.
I have found them easy to work on the few times I have needed to. I do not buy parts from chain stores. I usually buy them from Subaru simply because the car is so well built I'd rather use quality parts and pay a little more. Most of the stuff has been price competitive. I bought the a/c compressor used for almost nothing, because apparently they never go bad! If you would manage to wear the engine out I would not rebuild it, just replace it with another used engine. They are not hard to find. Subarus are like Lego's, you can swap parts around between the various models pretty easily.
The price sounds 'average'. A 200,000 mile car is a tough sell no matter what brand it is. You could probably do a bit better. If the engine is quiet, not leaking oil and the trans shifts as it should, I'd think it's a good car.
Stop The Longbed Hate! :)
'65 F100 Custom Cab bought 2002/Sold 2014
Now: '93 F150 Lightning
User avatar
DV65CustomCab
Posts: 1497
Joined: July 18, 2006, 4:23 pm
Location: Elizabethtown, PA
United States of America

Post by DV65CustomCab »

fmartin_gila wrote:My 2nd wife had one with the automatic, but that would have been in about 1979, so they prolly are somewhat better now.
Totally different animal. No comparison to Subarus built after, say, 1992.
Stop The Longbed Hate! :)
'65 F100 Custom Cab bought 2002/Sold 2014
Now: '93 F150 Lightning
User avatar
66fordtrucknut
Posts: 1289
Joined: July 11, 2006, 11:48 pm
Location: Eastern Shore - MD

Post by 66fordtrucknut »

Dwight my subaru OB is a 95' which is the 1st year, it's just a legacy with the ob trim, and is awd, I would think if it's a outback it's awd. We love ours, although I wish it was a little better on mpg.
Charlie
62' SWB uni 223
66' F-100 Short/wide 352
78' F-350 dually dumpbed 400
12' F-150 5.0 3:73 LS
unibodyboy
Posts: 165
Joined: August 14, 2006, 2:44 am
Location: Washington State

Post by unibodyboy »

Greg Like Subies!!!
Greater love has no man than this, that a man lay down his life for his friends. John 15.13
User avatar
ezernut9mm
Posts: 9141
Joined: July 21, 2006, 9:37 pm
Location: KCMO
Sweden

Post by ezernut9mm »

you might browse through here:

http://forums.nasioc.com/forums/

becareful, they do bite over there.
always
"i believe i've achieved satisfaction".-bubbles
"should i be gettin" baked for this boys?"-bubbles


i could no longer keep "r.i.p.ing" all of our fallen brothers and sisters, so i say here, slick loads of love and much respect to all you beautiful people.
beagle
Posts: 132
Joined: August 26, 2006, 11:13 pm
Location: Newtown PA
Contact:

Post by beagle »

I had a 92 Sube 2 wd 5spd wagon, bought it used for 1800 with 86,000 ran it to over 160,000, changed timing belt 2 times, the first time was right when I bought it. Zippy little car, put lots of high way miles on her in 3 years. It ran pretty good, would've probably gone 200,000 with her but the body basically rattled apart...
Beagle
61 unibody
willy3486
Posts: 817
Joined: July 11, 2006, 10:31 am
Location: Smithville TN

Post by willy3486 »

I am thinking about passing on the car. I really like it but I really don't want to have to do a lot of stuff to it if I pay that. Its not that much but If I buy a car at 2100 and then have to have 600 or more I can probably just find one with less miles and have the same amount in it. I have located a 97 sunfire like mine that needs a windsheild,radiator and airbags for 800 bucks. I could get that and swap the parts from mine now and only have the 800 bucks,tow fee and windsheild install in it. So I could get a car with a lot less for around 1000 bucks. If the guy still has it I am probably buy the sunfire.
User avatar
DV65CustomCab
Posts: 1497
Joined: July 18, 2006, 4:23 pm
Location: Elizabethtown, PA
United States of America

Post by DV65CustomCab »

The difference, of course, is that you will have a Sunfire instead of a Subaru. The Suby will provide reliable service and still be worth most of what you paid for it in a couple years. The Sunfire will be a useless doorstop. 8)
Stop The Longbed Hate! :)
'65 F100 Custom Cab bought 2002/Sold 2014
Now: '93 F150 Lightning
shawns fords
Posts: 1111
Joined: March 31, 2007, 11:34 am
Location: Foxfield Colorado
Contact:

Post by shawns fords »

soobies are one of the easiest cars ive ever worked on :D it is the only import I would ever even consider to purchase myself. yet I still havent found a reason to own one, I dont have a job where I just commute back and forth to a office therefore trucks are practical for my type of work. but I do have experience working on them back when I wrenched independently at a few small auto repair shops. and the main repairs were crank and cam seals (which would be sold when doing timing belt maintenance) and it was very easy to do the work
Post Reply