replacing a airbag

A place for discussion of off topic subjects. Pretty much anything goes - just keep it civil, please!

Moderators: Casey 65, Kid

Post Reply
willy3486
Posts: 817
Joined: July 11, 2006, 10:31 am
Location: Smithville TN

replacing a airbag

Post by willy3486 »

Well I think I have found a replacement car. I ran across a 97 sunfire that has less than 100k on it. The car was running great before the guy hit a deer. I have a 98 that has a tranny going bad. It needs a radiator,windsheild,and the airbags all of which are good on my present 98 sunfire. I can get it for only 800 bucks. Add another 100 for having it moved and 50 bucks from a guy I know to put my current cars windsheild into the new one. So for less than 1 grand I can get a car with less than 100k miles. My question is this, how hard is it to take the airbags off and put them on this one I am getting? I know to take the battery off during the replacement of the airbags. I am thinking they just bolt on and have jacks to connect. Do you need special tools? I am confident in my skills in this area ,I am weakest in working on the engine. I am somewhat familiar with the airbag deployment but have never changed one. Any comments? I decieded to go this route because the car was cheap and no loan involved. I will put off a few years to get a ranger truck.
shawns fords
Posts: 1111
Joined: March 31, 2007, 11:34 am
Location: Foxfield Colorado
Contact:

Post by shawns fords »

there shouldnt be any concerns in swapping the air bags as long as both vehicles are compatible to use them. ( cross reference to make sure )
MrEvil
Posts: 187
Joined: August 19, 2006, 9:40 pm
Location: Amarillo TX USA
Contact:

Post by MrEvil »

Make sure you take some ESD precautions like the silly grounding bracelet you see computer technicians wear. Airbags contain enough explosive to cause signficant injury if they go-off out of their normal mount.
Vehicles:

2000 F250 Superduty Crew cab
1998 Ford Crown Victoria Police Interceptor(work beater)
1961 F100 Uni (my baby)
1966 Thunderbird: someday.
willy3486
Posts: 817
Joined: July 11, 2006, 10:31 am
Location: Smithville TN

Post by willy3486 »

I have a 98 sunfire 4 door and this is a 97 4 door. I Read up a little on it last night and I am a little nervous about it now. I can replace them but I do have specific questions about this model. I was wondering about the sensor that trips it. I think it is in the front but where? I probably will need to replace that also. Is there a way to check those sensors with a ohmmeter? Are there other sensors on the car that is in another area? Can you get these parts off the net? I have the airbags on mine which are good but one of the boxes that deals with mine is bad. I was told by the dealership it was the one under the seat. Is there a good step by step out there? Where can I look up the info to cross reference them? I would prefer to buy a vehicle ready to go but this is such a good deal I hate to pass on it. plus the way gas is going and the miles I drive I need something that gets good gas mileage. As far as the static discharge I work on computers for a living so I am use to static damaged devices.
User avatar
Johnny Canuck
Posts: 8291
Joined: April 9, 2006, 11:14 pm
Location: Edmonton, Alberta.
Canada

Post by Johnny Canuck »

Willy will your local laws let you get by without replacing the airbags? Because it would be a lot easier to referernce Thailand and say Phuket (pronounced poo-kit) if you can. Once a car has deployed it's airbags here, it is almost always a write off with the insurance co.s as it is such a hassle to replace them.
It's a race.. Will hell freeze over or will JC finish his truck first. Stay tuned..
ICEMAN6166
Posts: 11470
Joined: July 11, 2006, 11:28 am
Location: Dove Creek, Co. elevation 6842
Poland

Post by ICEMAN6166 »

i agree with JC.
every car/ truck we ever towed from an accident where the airbag exploded the insurance cos. totaled out.
1966 F250 4x4
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
willy3486
Posts: 817
Joined: July 11, 2006, 10:31 am
Location: Smithville TN

Post by willy3486 »

The one I am looking at getting is 10 years old and the guy didn't have full coverage. So he just wrote it off. I have not seen it yet but I will Sat. I asked him some questions and he described it like he knew about cars. He hit a deer and because the parts were so high and it was old he decided not to fix it. It still drives good and it drove good before he hit a deer. It looks like he hit it and the deer rolled off. No frame damage. The airbags blew, it needs a windshield,hood and a AC coil. So this would be perfect for me. I have the parts on my car I use now. The transmission in mine is going out. So I can get this and fix it myself. I really don't want to go in debt for a car now and can get this cheap. As far as laws here goes they are really lax compared to other states. My current car has a rebuilt title. All I had to do to get the title fixed was to pay a fee,send pictures and a letter of how I was going to fix it. I didn't have to have any inspection on the car.
User avatar
DV65CustomCab
Posts: 1497
Joined: July 18, 2006, 4:23 pm
Location: Elizabethtown, PA
United States of America

Post by DV65CustomCab »

I have bad news for you.
The 1997 and 1998 air bags are different. They do not interchange according to Hollander. 96-97 is one kind, 98-99 is another.
Stop The Longbed Hate! :)
'65 F100 Custom Cab bought 2002/Sold 2014
Now: '93 F150 Lightning
blackagatha
Posts: 2582
Joined: March 10, 2007, 12:49 am
Location: Arizona

Post by blackagatha »

OR, you could do what I would do in your situation, and just plunk the transmission/other drivetrain components that you mention into the car that was NOT crashed... instead of parting an intact car to repair a crashed one.
'63 with 390 & lots of juice. But never enough. Always want more.
ImageImageImage
willy3486
Posts: 817
Joined: July 11, 2006, 10:31 am
Location: Smithville TN

Post by willy3486 »

That wouldn't be a bad idea except mine is a high mileage car. My current one needs the tranny,ac fixed,back wheel needs bearing. It would need the cv joints replaced before long. But this other is a low mileage and just needs a few parts that I have on my car.
Phil
Posts: 2125
Joined: June 1, 2007, 9:37 pm
Location: toledo

Post by Phil »

At first I thought this was a "getting a new girlfriend" question. :lol:
Someday I'll get another slick :(
Image
blackagatha
Posts: 2582
Joined: March 10, 2007, 12:49 am
Location: Arizona

Post by blackagatha »

Heavyhauler wrote:At first I thought this was a "getting a new girlfriend" question. :lol:

haha that's pretty good.

Yea, I guess it makes enough sense to try to do it the way you are looking at it. You'd have to tear the whole car apart to do all that to the car you have...
'63 with 390 & lots of juice. But never enough. Always want more.
ImageImageImage
User avatar
Johnny Canuck
Posts: 8291
Joined: April 9, 2006, 11:14 pm
Location: Edmonton, Alberta.
Canada

Post by Johnny Canuck »

LOL new girlfriend. huh.
The Who covered that one. "Won't get fooled again"
the lyrics go:

Pick up my guitar and play
Just like yesterday
Then I'll get on my knees and pray
We don't get fooled again
Don't get fooled again
No, no!
Yeaaaaaaaaaaaaaaaaaaaaaaaaah!
>>>Meet the new boss<<<
>>>Same as the old boss<<<
It's a race.. Will hell freeze over or will JC finish his truck first. Stay tuned..
Post Reply