O/T My latest (Ford) acquisition
My dad had a 54 sudebaker with a paxton supercharged 289. Its the only car he regrets selling. I never knew they put chebby motors in those cars, that sucks. Now for a real laugh, in the latest issue if Hotrod Mag, the one with the 09 Camero, in the readers ride section, some guy put an early hemi in a 70 chevelle. Hows that for cross breeding/inbreeding

Cheers,
Jarrod
Jarrod
- Johnny Canuck
- Posts: 8291
- Joined: April 9, 2006, 11:14 pm
- Location: Edmonton, Alberta.

I picked up a 51 studebaker champion starlight coupe last year. Started doing research and guess what? There are plenty stude guys out there who say you should stick with stude engines and there are alot more parts for these cars out there than I thought. They only put chevy engines in the last couple years of production, previous are all studebaker engines. I wanna put a 5.0 EFI in mine along with suspension upgrades.
Alan
Low 64 F100
49 F1
51 Studebaker Champion
Low 64 F100
49 F1
51 Studebaker Champion
- Johnny Canuck
- Posts: 8291
- Joined: April 9, 2006, 11:14 pm
- Location: Edmonton, Alberta.

Right on. So are ya gonna run out and get an R2-289 and stuff it in there buddy? Right thing to do.a2z64 wrote:There are plenty stude guys out there who say you should stick with stude engines and there are alot more parts for these cars out there than I thought.
Huh? I had to check twice to see if this was coming from the same guy, in the same paragraph. I must have missed something.a2z64 wrote: I wanna put a 5.0 EFI in mine .
I once saw a NICE Rambler American at an auction sale with a Ford 300 six with a Clifford?? 2-4 barrel setup. Crimony, and at the time new Jeeps were still gettting a fuel injected AMC six from the Chrysler factory too... I think the Saskatchewan farm boy had smoked too much of his old man's hemp rope..
No one bid on the Rambler.........
It's a race.. Will hell freeze over or will JC finish his truck first. Stay tuned..
I never said I was a Stude guy. I'm a Ford guy who happened upon a Stude last year and thought it would make an interesting project. My point was that even though they don't make Studes anymore there's still a lot of passion out there for keeping those vehicles the same. It can be done, but it's not as easy as keeping a ford the same due to the availability of new and old parts. I want to go the route of putting ford in it for a variety of reasons - availability of parts, upgrades, I'm a ford guy, etc. Do I like chevies in Fords....NO. I feel that's different than putting a ford in the stude for the simple fact that there are plenty of parts and aftermarket items being made to put fords in fords.
Alan
Low 64 F100
49 F1
51 Studebaker Champion
Low 64 F100
49 F1
51 Studebaker Champion
- Johnny Canuck
- Posts: 8291
- Joined: April 9, 2006, 11:14 pm
- Location: Edmonton, Alberta.

Thanks Johnny. This is the first non-Ford vehicle I've ever bought and it's got a long way to go. It's definately a unique vehicle, they only made the bullet nose cars for 2 years so you don't see many of them around. I've been poking around a stude site, but it's not the same as hanging out on this one!
Alan
Low 64 F100
49 F1
51 Studebaker Champion
Low 64 F100
49 F1
51 Studebaker Champion
- Johnny Canuck
- Posts: 8291
- Joined: April 9, 2006, 11:14 pm
- Location: Edmonton, Alberta.

- Johnny Canuck
- Posts: 8291
- Joined: April 9, 2006, 11:14 pm
- Location: Edmonton, Alberta.

Know one guy with an Avanti R2 though,, what a nice car. 4 wheel disc brakes, supercharger... Car was at least 20 years ahead of it's time
I also know a guy who is the original owner of, and still has, one of those wagons that the roof slides away over the cargo deck for them tall loads.
I also know a guy who is the original owner of, and still has, one of those wagons that the roof slides away over the cargo deck for them tall loads.
It's a race.. Will hell freeze over or will JC finish his truck first. Stay tuned..
Stude's make great salt flat racers. Not too many old fogies here!
http://www.youtube.com/watch?v=eq7RPpkaSL0
http://www.youtube.com/watch?v=eq7RPpkaSL0
My Slick is rustier than your Slick! 
-
ICEMAN6166
- Posts: 11470
- Joined: July 11, 2006, 11:28 am
- Location: Dove Creek, Co. elevation 6842

lots of industrial stude 6 cyls just like the ford 300.some of the weasel tracked vehicles have stude 6s.
too many of the ones i have seen ,especially the trucks ,have been swapped to the sbc.
too many of the ones i have seen ,especially the trucks ,have been swapped to the sbc.
1966 F250 4x4
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
- jimbob1021
- Posts: 171
- Joined: September 10, 2006, 7:56 pm
- Location: battle creek mi
- Contact:
