Can we be too involved with Slicks???

A place for discussion of off topic subjects. Pretty much anything goes - just keep it civil, please!

Moderators: Casey 65, Kid

User avatar
Truckfarmer
Posts: 324
Joined: April 3, 2006, 5:53 pm
Location: Illinois

Can we be too involved with Slicks???

Post by Truckfarmer »

Please look at this photo and tell me:

A. I am a serious Slickaholic

B. I am a bachelor

c. All of the above!
[img][albumimg]3093[/albumimg][/img]
If you drove a Ford, you wouldn't need a good wrench!
User avatar
Truckrat
Posts: 2513
Joined: July 27, 2006, 5:06 pm
Location: Oklahoma City, Ok.
United States of America

Slickaholic

Post by Truckrat »

:iagree: Hey, ya gotta get em cleaned up some way eh! I'd prolly stick mine in the automatic dishwasher. Couldn't hurt.
What about dirty tail light lenses? Ever do them in a dishwasher?
You can powdercoat parts in your oven, too, but it might make your food smell funny. :rotflmao: TR
ras4434

Post by ras4434 »

There is another option: The wife is out of town visiting her sister and you told her that you would do some of the housework. That is worth a couple of "get out of the dog house" tickets and the slick parts are on the road to "beautification". I used to clean all of my empty shotgun shells in the washing machine and dryer so I could reload them. The clean up real well when yopu put them in a pair of old nylons.
User avatar
Alan Mclennan
Posts: 9324
Joined: October 14, 2006, 6:16 pm
Location: In the shed... Cranebrook NSW
Australia

Re: Can we be too involved with Slicks???

Post by Alan Mclennan »

Truckfarmer wrote:Please look at this photo and tell me:

A. I am a serious Slickaholic

B. I am a bachelor

c. All of the above!
[img][albumimg]3093[/albumimg][/img]
D.you haven`t got a dishwasher :P


Alan,
Honey, If I say I`ll fix something I will, there`s no need to remind me every 6 months!!
66 f100 tabletop swb 351 Clevo C6 "Beryl"

Slick Stock 3 KCMO
Slick Stock 4 Altoona
Slick Stock 5 KCMO
Slick Stock 6 Altoona
Slick Stock 7 Salina KS
Slick Stock 8.............................. cry.gif
User avatar
66fordtrucknut
Posts: 1289
Joined: July 11, 2006, 11:48 pm
Location: Eastern Shore - MD

Post by 66fordtrucknut »

Kinda reminds me of when Chuck (Wyatt) thinned out his paint with his wifes blender.

Charlie
62' SWB uni 223
66' F-100 Short/wide 352
78' F-350 dually dumpbed 400
12' F-150 5.0 3:73 LS
BigTim
Posts: 890
Joined: August 6, 2006, 4:26 pm
Location: Slickless

Re: Can we be too involved with Slicks???

Post by BigTim »

Alan Mclennan wrote:
D.you haven`t got a dishwasher :P


Alan,
Maybe she was out of town, or taking Thanksgiving week off. :lol:
User avatar
Johnny Canuck
Posts: 8291
Joined: April 9, 2006, 11:14 pm
Location: Edmonton, Alberta.
Canada

Post by Johnny Canuck »

My wife has been looking at a 351 intake with a demon carb it for 6 months sitting in her hallway. There's always some assortment of parts in the process of cleaning or rejuvenation either in her sink, or sitting in the back closet. This is basically payback for all the old chairs and memorabilia that she will not part with, that clutters up my garage, but it takes a special kind of gal to put up with it.
It's a race.. Will hell freeze over or will JC finish his truck first. Stay tuned..
User avatar
Slick Fan
Posts: 4085
Joined: November 4, 2006, 5:09 pm
Location: UTAH...snow blows!

Post by Slick Fan »

66fordtrucknut wrote:Kinda reminds me of when Chuck (Wyatt) thinned out his paint with his wifes blender.

Charlie
Nice! :rotflmao:
My "Slickitis" affliction began here...
Image


66 F100 CC/65 F100 CC/66 F250 CC
If it starts to rain, they'll tax the splash.
If you want to fish, they'll tax the bass.
If you plant a yard, they'll tax the grass.
If you don't play nice, they'll fine your *$#!
ICEMAN6166
Posts: 11470
Joined: July 11, 2006, 11:28 am
Location: Dove Creek, Co. elevation 6842
Poland

Post by ICEMAN6166 »

Johnny Canuck wrote:My wife has been looking at a 351 intake with a demon carb it for 6 months sitting in her hallway. There's always some assortment of parts in the process of cleaning or rejuvenation either in her sink, or sitting in the back closet. This is basically payback for all the old chairs and memorabilia that she will not part with, that clutters up my garage, but it takes a special kind of gal to put up with it.
thats pretty much how it goes around here too.
besides a little bit of clutter in the garage is worth use of the sink and closet.or the oven and freezer.
1966 F250 4x4
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
User avatar
Alan Mclennan
Posts: 9324
Joined: October 14, 2006, 6:16 pm
Location: In the shed... Cranebrook NSW
Australia

Post by Alan Mclennan »

ICEMAN6166 wrote:
Johnny Canuck wrote:My wife has been looking at a 351 intake with a demon carb it for 6 months sitting in her hallway. There's always some assortment of parts in the process of cleaning or rejuvenation either in her sink, or sitting in the back closet. This is basically payback for all the old chairs and memorabilia that she will not part with, that clutters up my garage, but it takes a special kind of gal to put up with it.
thats pretty much how it goes around here too.
besides a little bit of clutter in the garage is worth use of the sink and closet.or the oven and freezer.
Johnny I hope its a 351c :lol:


Iceman! I see you found another righthand drive slick to :lol:


Alan,
Honey, If I say I`ll fix something I will, there`s no need to remind me every 6 months!!
66 f100 tabletop swb 351 Clevo C6 "Beryl"

Slick Stock 3 KCMO
Slick Stock 4 Altoona
Slick Stock 5 KCMO
Slick Stock 6 Altoona
Slick Stock 7 Salina KS
Slick Stock 8.............................. cry.gif
User avatar
Greg D
Posts: 10113
Joined: September 13, 2006, 4:39 pm
Location: Podunk Iowa
United States of America

Post by Greg D »

I don't remember where but I saw a similar thread posted by a guy a couple years ago.
His wife had left him because he had washed his valve covers in the dishwasher - he was completely baffled by the whole thing. He wasn't getting much sympathy, the replies ran from compliments on his creativity to it being down right hysterical. Washing chrome trim with the dishes is pretty clever!
1964 F 100 - I am going to do "something" with it.......

viewtopic.php?f=32&t=15942

1987 Mustang LX Convertible, 2.3 Auto - cruiser.
1994 F 150 XLT 2WD


~ Yes - I adopted another cat..............

Cam L Milan,
You'll be missed my friend.
User avatar
Johnny Canuck
Posts: 8291
Joined: April 9, 2006, 11:14 pm
Location: Edmonton, Alberta.
Canada

Post by Johnny Canuck »

Alan Mclennan wrote:Johnny I hope its a 351c :lol:
Alan,

Alan if it was a Cleveland it would have hit the ebay trail long time ago. I can't afford to have those expensive parts kicking around my hallway
It's a race.. Will hell freeze over or will JC finish his truck first. Stay tuned..
User avatar
Truckfarmer
Posts: 324
Joined: April 3, 2006, 5:53 pm
Location: Illinois

Post by Truckfarmer »

Alan if it was a Cleveland it would have hit the ebay trail long time ago. I can't afford to have those expensive parts kicking around my hallway

I built my Cleveland for a lot less than my 390 cost! Probaly because guys building 427's and 428's use the same parts. If I was building my Slick from scratch, good chance it would have a 351C next time.
If you drove a Ford, you wouldn't need a good wrench!
User avatar
Hoofbeat Racer
Posts: 1782
Joined: July 6, 2006, 12:22 am
Location: Rocky Mountains, Alberta
Canada

Post by Hoofbeat Racer »

Truckfarmer
Doesn't everyone wash parts that way? I would only be concerned if my wife started using the varsol tank for dishes :rotflmao:
Mark


Image
User avatar
Uncle Skip
Posts: 4695
Joined: July 15, 2006, 8:30 pm
Location: Pearland, Texas
United States of America

Post by Uncle Skip »

Greg.
I don't know so much about washing parts in the sink, but mamma was a little disturbed when she came home one afternoon and found I was stress relieving my connecting rods in the oven at 450 degrees.
Something about "why does the pot roast smell like..... you're cooking WHAT??????"
Women got no sense of humor, and they got no understanding of serious mechanical issues.
As a result, I had to sleep in the garage, but sacrifices have to be made and a MAN's gotta do what a MAN's gotta do.
Dammit, I thought they would have been done way before she got home.... I started early.... :shock:
U@ss
ROTFLMAO :wink:
I'm not arguing with you. I'm just explaining why I'm right.
Pardon me. Does your deaug bite?
User avatar
66fordtrucknut
Posts: 1289
Joined: July 11, 2006, 11:48 pm
Location: Eastern Shore - MD

Post by 66fordtrucknut »

From: wyatt Sent: 7/24/2005 4:39 AM
Wow, it must be a painting weekend. I got up this morning to hear Chad say I'm going to the paint shop to get hardner. I got up and waited for his return. He loaded the gun with primer and shot the firewall on his 61 uni. Then it came time to paint it with paint that I had left over from my truck. When he opened the can, things kinda went south. I guess when I used it the last time, I didn't get the lid closed tight enough. The paint looked like silly putty. I'm thinking, Oh boy!!!. Chad added a little reducer and started stirring. Just turned into little lumps. Well? The wife wasn't home. So we raided the kitchen. She didn't need what we took anyhow. She hadn't used it for years.
We put some of the lumpy paint in and added some reducer and hit the button. Yep, you guessed it. We took her blender. Anyhow, the lumpy paint turned into a big red ball. Ok, let's add more reducer. Left it blend for a couple minutes only to see the ball get bigger. Now I'm starting to think this ain't working. So we figure why not a little more reducer. A couple more minutes go by and all of a sudden it turned back into paint. We're amazed at what we just did.
Then we hear a car door slam. It looked like a free for all. There wasn't time to hide the blender or even to hide ourselves to keep from being scolded like a couple of 2 year olds. We just stood our ground and hoped for the best.
She walked in and wanted to know what we we're up to. We said nothing. Well, the grandkids gave it away. She yelled, we laughed and she yelled somemore and she also reminded us that it was a wedding present from when we got married.
We tried to tell her it didn't work when we got it out but somehow that wasn't important.
Well, the storm settled after awhile and it was ok after being told we must replace it.
BUT, it worked and we got the firewall painted and it looks good. So keep in mind a blender works great for old paint.
I spent the whole day out in the garage tinkering with the uni.
Did I mention that we also took one of her measuring cups to measure the paint with? That's another story. All I remember her saying is that it cost $19.00 and you can't buy them in a store. Wheww, what a day.
Well, good luck Charlie with your paint job. Kitchen utensils do come in handy when needed.
Oh, Did I mention that a dipper comes in handy too.
Chuck


I had to back and look this up, those of you who know Chuck & Chad can relate.
Charlie
62' SWB uni 223
66' F-100 Short/wide 352
78' F-350 dually dumpbed 400
12' F-150 5.0 3:73 LS
User avatar
Slick Fan
Posts: 4085
Joined: November 4, 2006, 5:09 pm
Location: UTAH...snow blows!

Post by Slick Fan »

Oh Man, that's absolutely priceless!! :rotflmao:

I can just imagine the look on their faces when the car door slammed... :shock:
My "Slickitis" affliction began here...
Image


66 F100 CC/65 F100 CC/66 F250 CC
If it starts to rain, they'll tax the splash.
If you want to fish, they'll tax the bass.
If you plant a yard, they'll tax the grass.
If you don't play nice, they'll fine your *$#!
blackagatha
Posts: 2582
Joined: March 10, 2007, 12:49 am
Location: Arizona

Post by blackagatha »

hahaha that is excellent. I thought it was strange that I tried to make cookies in my blender.


Some time back, I got a loud knock on the door from the RA of my Dorm. Apparently some kid wanted to cook a cake in the common kitchen's oven. Apparently some dumbass was trying to cure VHT header paint on his block hugger headers in the oven. YES, he was correct in believing that they were my headers.... they didn't know what the hell to think when they found that.

HELL, all the paint peeled off the first night I drove it anyway... don't ever use aluminum color VHT. I actually took a gamble, and tried some "Nu Cast" VHT Iron color, without the VHT primer this time, for whatever reason, it seems to work a lot better.
'63 with 390 & lots of juice. But never enough. Always want more.
ImageImageImage
User avatar
greythorn3
Posts: 107
Joined: September 26, 2007, 12:49 am
Location: anchorage alaska
Contact:

Post by greythorn3 »

reminds me of when i was baking my ringear in the oven and freezing my flywheel in the freezer so i could assemble them on the cooktop.. and yes your right it does take a special kind of woman to put up with it.. i have my 65 doors in the living room right now!

Ray
wheelordie.com my alaska offroad website
blackagatha
Posts: 2582
Joined: March 10, 2007, 12:49 am
Location: Arizona

Post by blackagatha »

haha excellent. Parts with chemicals on them are the BEST when in the oven.... The kitchen smelled funny as hell when I was cooking the thinner out of the VHT.
'63 with 390 & lots of juice. But never enough. Always want more.
ImageImageImage
Post Reply