lost my remote. loaned it out to Adam Sandler and he threw it in the trash. since i cant fast forward the next few months i guess i need to find something to do.
today i finally got done with fixing and attached the plow to the front of my 65 towtruck and pushed some snow around.the ""new" d70 posi rear works nicely, much better than the open d60.
found a manual wheel lift for $100, think i am going to put it on the 62 f350. also need to straighten out the front crossmember someone wrapped a chain around it and pulled too hard and its bent.its set up for a 292, not sure what im going to put in it yet.
had to tap on my 66s generator for the wife again this morning. time to start working on hers too.
tomorrow i will see how much firewood i can put in the bed of the bump 4x4.
wheres my remote and some other comments
-
ICEMAN6166
- Posts: 11470
- Joined: July 11, 2006, 11:28 am
- Location: Dove Creek, Co. elevation 6842

wheres my remote and some other comments
1966 F250 4x4
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
About to start cutting firewood myself Iceman. Crazy thing is we don't even burn wood anymore but I just
cant see letting a bunch of left over oak & hickory tops rot down from where we had some timber harvested.
Thinking about making a small log cabin style smokehouse out of some of it and trying my hand at some home made charcoal for BBQ use.
cant see letting a bunch of left over oak & hickory tops rot down from where we had some timber harvested.
Thinking about making a small log cabin style smokehouse out of some of it and trying my hand at some home made charcoal for BBQ use.
- robert porterfield
- Posts: 239
- Joined: October 31, 2007, 10:27 pm
- Location: eugene oregon 97402
- robert porterfield
- Posts: 239
- Joined: October 31, 2007, 10:27 pm
- Location: eugene oregon 97402
-
ICEMAN6166
- Posts: 11470
- Joined: July 11, 2006, 11:28 am
- Location: Dove Creek, Co. elevation 6842

i once filled up a dentside f100 with so much wood the rear bumper dragged on the ground. truck still drove out .robert porterfield wrote:the bump wont hold as much as the slick my buddy has been trying for years
1966 F250 4x4
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
-
ICEMAN6166
- Posts: 11470
- Joined: July 11, 2006, 11:28 am
- Location: Dove Creek, Co. elevation 6842

actually it helped keep the front end up out of the deep snow more like skis than tires at that point. did not have to travel any main roads .Jarrod wrote:could you steer it??
1966 F250 4x4
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
-
ras4434
I just happen to know that a 66 F100 with overload springs can haul a full cord of Maple, Alder or Fir. I also just happen to know that it is possible to replace a race and set of bearings on the rear axle with a splitting maul and wedge along the side of a road. Scariest day of my life was when I crawled under the truck to place the bottle jack under the axle and then jack it up. Thats got to be one of the dumbest things I ever did........well at least close. I do love a good fire in the wood stove when it is cold outside. Always wanted to route a radiator behind the wood stove and then out to a hot tub...........oh well
