Stupid PO stuff; part XXXMVII

A place for discussion of off topic subjects. Pretty much anything goes - just keep it civil, please!

Moderators: Casey 65, Kid

Post Reply
User avatar
Greg D
Posts: 10113
Joined: September 13, 2006, 4:39 pm
Location: Podunk Iowa
United States of America

Stupid PO stuff; part XXXMVII

Post by Greg D »

Well after testing EVERYTHING in Marcus' 85 LX vert found a bad ECM. It either croaked at literally the same time as the alternator or the the bad alternator sent a spike or AC current through the system & toasted it.
Since I now had it running it wouldn't charge the battery - again!!
:cussing: So I chased & tested the alternator harness, replaced the fusible link, and had the alternator tested (yes the new one). Guy at the parts store asked "You check the regulator?". I said "It's internal", He said "Not on this alternator", I said "You give me the right alternator?" (they have called me to ask questions, lol). He looked it up again & sure enough external regulator???
Hmmm, well I didn't find one under the hood where it would've been mounted (I do know a regulator when I see one after 35+ years of working on cars & know my Foxstangs (first CFI car though). So he shows me a pic of the regulator and nope not one in the car but I take one with me on the odd chance I missed it. Well the PO had removed the regulator and just stuck the plug for it through a hole in the inner fender!!!!! What kind of @#$%^&*! MORON removes the regulator and just leaves it off? (also still wondering how I missed this in the first place).

:oops:
The car now charges the battery, go figure!
Now to get the gas gauge working.
1964 F 100 - I am going to do "something" with it.......

viewtopic.php?f=32&t=15942

1987 Mustang LX Convertible, 2.3 Auto - cruiser.
1994 F 150 XLT 2WD


~ Yes - I adopted another cat..............

Cam L Milan,
You'll be missed my friend.
User avatar
Hoofbeat Racer
Posts: 1782
Joined: July 6, 2006, 12:22 am
Location: Rocky Mountains, Alberta
Canada

Post by Hoofbeat Racer »

:rotflmao: Sorry to laugh at your expense. POs can definately be frustrating. I am fortunate to buy new for the wife and have full control of any mods, if its for me I normally strip it to nothing and start over. That being said, I hope if I ever sell my slick nobody curses me! Its neat and organized but it is not simple!

My personal favorites are toggle switch heater fans, washers and wipers. Oh yeah, and toggle switch running lights with no fuses or relays :nono:

Greg, you should change your signature to FOXoholic :rotflmao:
Mark


Image
User avatar
Johnny Canuck
Posts: 8291
Joined: April 9, 2006, 11:14 pm
Location: Edmonton, Alberta.
Canada

Post by Johnny Canuck »

well Greg you met the PO of Jinx, I tell ya there was sure some funky stuf happening there, not all of which I got corrected before I sold her to Dean. So now dean is prolly cursing me.

LOL and the beat goes on. That is sure a bizzare one tho. who needs these dang regulator things.. toss it i say... :roll:
It's a race.. Will hell freeze over or will JC finish his truck first. Stay tuned..
User avatar
DocDave
Posts: 206
Joined: July 17, 2006, 4:00 pm
Location: Fort Providence Northwest Territories

Post by DocDave »

My truck must have belonged to the same guy
3 wire alternator conversion wired up to a relay on the inner fender with no regulator at all.
I feel your pain but I got off easy. You could see the problem as soon as you looked at the conversion.
Dave
From a guy without his Ford that he left on a rock in the North Atlantic.
User avatar
Greg D
Posts: 10113
Joined: September 13, 2006, 4:39 pm
Location: Podunk Iowa
United States of America

Post by Greg D »

Definitely don't mind you guys getting a chuckle out of it, part of the reason I posted the story.
Don't you just hate it when something is as simple as that and you somehow just don't put A with B in your head? I would have spotted it in 10 seconds (9 of those for a swallow of beer) had it not stuck in my head I was dealing with an internal regulator alternator, you'd think the 3 wires on it would have been a clue, lol.
:shock:
1964 F 100 - I am going to do "something" with it.......

viewtopic.php?f=32&t=15942

1987 Mustang LX Convertible, 2.3 Auto - cruiser.
1994 F 150 XLT 2WD


~ Yes - I adopted another cat..............

Cam L Milan,
You'll be missed my friend.
User avatar
Truckrat
Posts: 2513
Joined: July 27, 2006, 5:06 pm
Location: Oklahoma City, Ok.
United States of America

PO problems

Post by Truckrat »

grrsign.gif Man, the PO of my 57 had all the interior bolt ons(sunvisors, rear view mirror, heater box, etc) in boxes when I bought it from him. At that time the truck was a basket case, so when I picked it up, the boxes of parts weren't with it. Asked him would he bring them to work and I could get them from him. Never happened. He moved a couple of times, and lost it all. PO of my 56 had the wrong rear shocks on it. Put some shocks on upside down cuz they fit that way. When I took them off they were full of water and had no valving resistance left. Truck just bounced up and down like it was waving bye bye. I am still finding weird stuff on that one. TR
blackagatha
Posts: 2582
Joined: March 10, 2007, 12:49 am
Location: Arizona

Post by blackagatha »

HAHA geez.

you guys have had some real dillies of experiences with dumb people's work.

Uh, lessee...
Aggie had

a chunk of a Pepsi can stuck in the fuse slot for the brakelights (the whole run of wire was Barbie-Qed...)

seatbelts attached to 1 inch holes in the floor with 1/2 inch grade 5 hardware that was about to yank thru

"hatchet wounds" in the dash and floor, where they tried to install a speaker and a shifter


probably a lot more, but I'm not really coming up with it, well, except missing visors, ashtray, vice-grip-window handle, and smashed ignition switch with a screwdriver for key. Oh, and a missing hood spring that made it tweak really strangely.
'63 with 390 & lots of juice. But never enough. Always want more.
ImageImageImage
User avatar
Truckrat
Posts: 2513
Joined: July 27, 2006, 5:06 pm
Location: Oklahoma City, Ok.
United States of America

PO goofs

Post by Truckrat »

:oops: Yeah B.A., the vicegrip door handle trick is something I have seen everywhere. I have had to do that on occasion in a pinch. I think a lot of people are scared of the possibility that they might have to pull out the mechanisms inside the doors and replace them. Sort of like some kind of black art reserved for shop mechanics who get 50 bucks an hour shop labor to mess with, so they just stick a pair of vicegrips on there and forget about it. TR
User avatar
Greg D
Posts: 10113
Joined: September 13, 2006, 4:39 pm
Location: Podunk Iowa
United States of America

Post by Greg D »

I have a few spare door & window setups. Everytime I see a good one at the pullurown I grab it for a spare.
1964 F 100 - I am going to do "something" with it.......

viewtopic.php?f=32&t=15942

1987 Mustang LX Convertible, 2.3 Auto - cruiser.
1994 F 150 XLT 2WD


~ Yes - I adopted another cat..............

Cam L Milan,
You'll be missed my friend.
blackagatha
Posts: 2582
Joined: March 10, 2007, 12:49 am
Location: Arizona

Post by blackagatha »

Last year I finally got a replacement regulator on Evilbay. Trouble with these is that you can't easily replace the shaft. They have to be un-riveted and replaced with a donor (OH WAIT why not just put in the other regulator?!?!)

When I was first gettin aggie goin I drilled a hole in the shaft and bolted on a crappy chinese handle. looked like crap but it worked nicely.
'63 with 390 & lots of juice. But never enough. Always want more.
ImageImageImage
MadMaxetc
Posts: 2600
Joined: July 10, 2006, 12:00 pm
Location: Wichita, KS
Contact:
United States of America

Post by MadMaxetc »

I pulled of 13 trailer harneses off my 67...13!! WTH!! he just kept splicing more in!

All PO are morons! :roll: :wink:
Dan
Project: '63 F-100 LWB / 460 / C6 / 2x4
My Build Thread
Lowell
Posts: 751
Joined: August 21, 2006, 8:01 pm
Location: Southern Indiana
United States of America

Post by Lowell »

Spent a big part of the last two summers grinding off two coats of paint applied by the PO with a brush.
blackagatha
Posts: 2582
Joined: March 10, 2007, 12:49 am
Location: Arizona

Post by blackagatha »

MadMaxetc wrote:I pulled of 13 trailer harneses off my 67...13!! WTH!! he just kept splicing more in!

All PO are morons! :roll: :wink:
13 harnesses???? what a retard. Sounds like he needed some sort of multi purpose universal adaptor... OR change the harnesses on each of his 13 trailers to match the truck....

He probably never even pulled a trailer... It was probably a "What-If" situation, thought he better be prepared for any sort of trailer plug there is....

I agree, there seems to be no such thing as an intelligent PO. Well, if someday I HAD to sell Aggie, which would be devastaating for me, the "new guy" would probably pick her apart and complain about some of the stuff I've done, but I think I've done good, logical work....
'63 with 390 & lots of juice. But never enough. Always want more.
ImageImageImage
Post Reply