i just went and bought this big 35 gallon sandblaster from harbor freight assembled it its getting air but it will not hardly shoot out any sand not enough to do anything does anyone have any suggestions we have a new 60 gallon kobalt aircompressor i called harbor feright tech support and the only response i could get was youre not suppose to put sand in a sandblaster!i may end up taking it back but im hoping i can figure out why it dont work
http://www.harborfreight.com/cpi/ctaf/d ... ion=Search
Sandblaster help and suggestions
Sandblaster help and suggestions
Ryan
61 Ford f100 Unibody short bed
351w/Aod
61 Ford f100 Unibody short bed
351w/Aod
- Uncle Skip
- Posts: 4695
- Joined: July 15, 2006, 8:30 pm
- Location: Pearland, Texas

It depends on the kind of sand you put in the unit.
If you're using play sand from Home Depot and the like, you'll probably have problems with it clogging.
It tends to be damp from when it was washed and sometimes it will have small pebbles in it.
Blasting sand, no matter what grade you get has to be bone dry to work properly.
Check locally to see if you have a Sanstorm dealer or sandblasting company and buy what they call sugar sand. No need to get slag or glass blast media for your unit. That stuff is for detail work in a blast cabinet.
Empty the unit, get some window screen and screen the sand you already have. Make sure it gets dry and isn't clogging and you should be fine.
And, as an afterthought, make sure the air you're using has a water seperator in front of the compressor discharge port.
Uncle Skip
If you're using play sand from Home Depot and the like, you'll probably have problems with it clogging.
It tends to be damp from when it was washed and sometimes it will have small pebbles in it.
Blasting sand, no matter what grade you get has to be bone dry to work properly.
Check locally to see if you have a Sanstorm dealer or sandblasting company and buy what they call sugar sand. No need to get slag or glass blast media for your unit. That stuff is for detail work in a blast cabinet.
Empty the unit, get some window screen and screen the sand you already have. Make sure it gets dry and isn't clogging and you should be fine.
And, as an afterthought, make sure the air you're using has a water seperator in front of the compressor discharge port.
Uncle Skip
I'm not arguing with you. I'm just explaining why I'm right.
Pardon me. Does your deaug bite?
Pardon me. Does your deaug bite?
yea all those have been checked.i was using the same sand with a little 2 gallon unit but i was spending more time sifting sand than blasting so i bought this thing that vacumes it right back up and does all that for you pretty trick toy but it barely shoots anything out.the sand i have been using is black diamond silica sand i got at tractor suppy i have a water seperaotr and regular at the compressor and the other one for the most part worked alot jsut wasnt getting anything accomplished blast for 5 mins sift sand for an hr.ill prolly just take this thing back tomorrow and get my buddy who done all the blastin on this truck to finish it up in his spare time
Ryan
61 Ford f100 Unibody short bed
351w/Aod
61 Ford f100 Unibody short bed
351w/Aod
For a pot that big I don't think your kobalt compressor is going to do the trick. Sandblasters don't need PSI, they need CFMs. My pop's got a 600pound Schmidt unit that won't work on any compressor you'll buy from Sears or Lowe's.
Vehicles:
2000 F250 Superduty Crew cab
1998 Ford Crown Victoria Police Interceptor(work beater)
1961 F100 Uni (my baby)
1966 Thunderbird: someday.
2000 F250 Superduty Crew cab
1998 Ford Crown Victoria Police Interceptor(work beater)
1961 F100 Uni (my baby)
1966 Thunderbird: someday.
I just confirmed with my dad. 35 gallon sand blaster is WAY too big for a reciprocating air compressor with only 18cfm of airflow. You're going to have to either get a much smaller sandblaster that can work with a typical shop compressor, or you're going to have to get a rotary screw type compressor that runs on 3 phase electricity to run a larger sandblaster. Type of media/sand has nothing to do with it because the sandblaster is simply TOO LARGE for your compressor to feed. My dad's schmidt blaster has been sitting in a shed for years because we don't have the compressor to run it.
Vehicles:
2000 F250 Superduty Crew cab
1998 Ford Crown Victoria Police Interceptor(work beater)
1961 F100 Uni (my baby)
1966 Thunderbird: someday.
2000 F250 Superduty Crew cab
1998 Ford Crown Victoria Police Interceptor(work beater)
1961 F100 Uni (my baby)
1966 Thunderbird: someday.
yeah, gravity feed blasters are horrible. You most definitely want a pressurized pot if you want that sand to move anywhere. Even the little sand blasters that are gravity feed are terrible.
Vehicles:
2000 F250 Superduty Crew cab
1998 Ford Crown Victoria Police Interceptor(work beater)
1961 F100 Uni (my baby)
1966 Thunderbird: someday.
2000 F250 Superduty Crew cab
1998 Ford Crown Victoria Police Interceptor(work beater)
1961 F100 Uni (my baby)
1966 Thunderbird: someday.
