Frugalness

A place for discussion of off topic subjects. Pretty much anything goes - just keep it civil, please!

Moderators: Casey 65, Kid

Post Reply
User avatar
Johnny Canuck
Posts: 8291
Joined: April 9, 2006, 11:14 pm
Location: Edmonton, Alberta.
Canada

Frugalness

Post by Johnny Canuck »

Or is that Frugality?
A long time ago, the Salesman from Roddoors told me over the phone.. "All you Ford truck owners are FRUGAL!!"

So I was reading thru here and seen some guy hates doing kingpins, when it takes 15 minutes to take your axle off, and run it over to a machine shop to be done.
Last Night I was struggling to take the bottom rad hose off my rig, recycled from the '78 that the engine core came out of. "Don't be so Frugal", I was telling myself," This thing has to go 1800 miles in August and you don't need to lose that hose in East Overshoe, Wyoming."

What's your frugal story? The Roddoors man was obviously right... 8)
It's a race.. Will hell freeze over or will JC finish his truck first. Stay tuned..
User avatar
Hoofbeat Racer
Posts: 1782
Joined: July 6, 2006, 12:22 am
Location: Rocky Mountains, Alberta
Canada

Post by Hoofbeat Racer »

Wish I could think of a good story John cept I completely blew the budget on my Ranger :oops: I have sold my 90 Bronco and my wife's 02 Impala to help fund this addiction to my Slick. I am considering Ebaying a kidney to get her on the road soon before large men from the bank start taking our possessions :shock:

Frugal, not really, I like to think I am cheap but I am really a Steak sandwich eater on a peanut butter budget
Mark


Image
User avatar
jwh f-100
Posts: 1903
Joined: June 11, 2007, 6:25 pm
Location: Equinunk, PA
United States of America

Post by jwh f-100 »

Please define the difference between a frugal person and a pack rat as I am not sure what category I fall into. LOL

At work we are fixing a vehicle with the batteries mounted to the frame that was hit in the side. The eight foot harness including heavy negative and positive cables and cable ends was replaced. The old one went into the garbage but guess where it is now... In a box in my garage.
Jason

Beer will change the world.

I don't know how but it will.
User avatar
Johnny Canuck
Posts: 8291
Joined: April 9, 2006, 11:14 pm
Location: Edmonton, Alberta.
Canada

Post by Johnny Canuck »

I dunno the difference myself as I have boxes and boxes of parts for Windsor engines, and whenever I throw anything out, within a week I need that part. 'Course it helps when all you seem to buy is vehicles with Windsor engines.. but still...

BTW that rad hose is still pretty good. Gonna get a new one for the Merc, but the old hose is not leaving home...

Mark, You are right, doing up a Ford truck is expensive at best, probably forcing those of us without quite as well-paying jobs to reuse and recycle. I could have done a Chev with all-new parts for cheaper, I am dang near sure. Then, I would have a belly button Chev just like everybody else, tho.
67-72 Chevs are common as houseflies around here. As I was typing this, 2 drove by my window.

Nah. Rather be a frugal Ford man. With a steel floor in my box.
Last edited by Johnny Canuck on April 10, 2008, 8:15 pm, edited 3 times in total.
It's a race.. Will hell freeze over or will JC finish his truck first. Stay tuned..
User avatar
Casey 65
Posts: 1883
Joined: April 3, 2006, 1:42 pm
Location: Kansas City, Missouri
United States of America

Post by Casey 65 »

I once heard, "Watch where a man puts his money, that is his passion". I don't know if that is true, but I know if you save nuts and bolts off someting that doesn't work anymore you can usually save a trip to the hardware store when you need a particular nut or bolt. If you throw something away, you will need it in a week and cuss yourself for throwing it away. I don't know how many parts for a slick you really need.... I'm not there yet. I like working on my slick, but have found out that you can take too big a bite out of the elephant. If I won the lottery, I would have the guy that paints for Chip Foose paint my Slick. Frugal is in the eye of the beholder. what is "cheap" for one is "frugal" to another. If you can...do. If you can't... you're about average... Always look for the funny things in the things that come your way. If you can laugh at a problem, it can't own you... I also know that I'll see you in August at Slick Stock III...
User avatar
FORDBOYpete
Posts: 850
Joined: July 21, 2006, 8:30 am
Location: East Central Florida USA

Post by FORDBOYpete »

JC,
I was taught frugal is being wise enough to not waste time, effort and money by actually being cheap.
Being cheap is how we waste time effort & money. It is also how we tend to get in trouble .
We all know, or ought to know by now, just how expensive trouble can be. shrug.gif

In my way of seeing it: Being frugal is what puts true value & worth in our lives, or into mine anyhow. . . . . :thumright:

"We gotta remember we always get what we pay for, Right?" That goes for a hosin' too we get taken
when we ignore the "being wise" part of the above remark.

I think Les Ismore said that. . . . :roll:

FBP Bolt.gif
Change is the Only Constant
willy3486
Posts: 817
Joined: July 11, 2006, 10:31 am
Location: Smithville TN

Post by willy3486 »

I am nicknamed Fred Sanford for my scavaging. Anyway with mine I used wood for door pulls,dash,door pocket rings because I had it. I went to the savage yard and got the ends of wiring rolls from factories that scrapped them. Good wire. I used a lot of scrap metal to make the parts. The one part I wish I could change is the Ned Beaty floors. I used metal for my floorboards from doors that were used in a swine barn between the pens. Now when you hit the gas pedal to the floor they "squeal like a pig" . So thats why they are called Ned Beaty floors.
User avatar
Johnny Canuck
Posts: 8291
Joined: April 9, 2006, 11:14 pm
Location: Edmonton, Alberta.
Canada

Post by Johnny Canuck »

Image

Heheheheheh Willy
It's a race.. Will hell freeze over or will JC finish his truck first. Stay tuned..
User avatar
Ford4jack
Posts: 707
Joined: July 22, 2006, 7:56 am
Location: Tennessee

Post by Ford4jack »

Dang that's perdy someone better take his pliers away though. :lol:
User avatar
Slick Fan
Posts: 4085
Joined: November 4, 2006, 5:09 pm
Location: UTAH...snow blows!

Post by Slick Fan »

Let me start out by saying that 50% of the time, if I remove a radiator/heater hose that has been on there a long time, it's not going back on. Because sure as snot, you try to reuse it & it's gonna leak.
If the hose is still semi-soft, I'll slice off the chunk below the clamp, so when I re-clamp it, it clamps on fresh meat again.
Speaking of which, have you seen the price of antifreeze lately??? :shock: :evil:

Other than that though, for the most part I reuse TONS of stuff! Hell, I even swipe good bulbs & miscelaneous fasteners & clips from cars in the boneyard as I walk by...just because you never know when crap like will come in handy. :lol:
My "Slickitis" affliction began here...
Image


66 F100 CC/65 F100 CC/66 F250 CC
If it starts to rain, they'll tax the splash.
If you want to fish, they'll tax the bass.
If you plant a yard, they'll tax the grass.
If you don't play nice, they'll fine your *$#!
User avatar
Johnny Canuck
Posts: 8291
Joined: April 9, 2006, 11:14 pm
Location: Edmonton, Alberta.
Canada

Post by Johnny Canuck »

LOL grant you are dating yourself by using the word "swipe" with that meaning

Bet you , like me, still go to the "record store" to buy music.

The hose BTW is still good, no soft spots. New one cost me 26 bucks this AM. Ouch.
It's a race.. Will hell freeze over or will JC finish his truck first. Stay tuned..
ICEMAN6166
Posts: 11470
Joined: July 11, 2006, 11:28 am
Location: Dove Creek, Co. elevation 6842
Poland

Post by ICEMAN6166 »

recycling of parts is a good idea.especially if you are "economically challenged" .
not much i wont save and reuse if possible.
must have installed at least 20 used clutch discs before.
any u-joint thats still tight i save, got enough to last many years.
belts and hoses might get reused depending.dont like reusing brake lines and brake hoses though.shoes with more than 50% of the lining left i will.

bought a bump body to put on a 4x4 frame several years ago.there was an FE in the bed.not seized so i decided to use it, condition unknown.ran out of oil on its first trip and seized up after 20 miles. wont use an engine now unless i hear it run or drive it first.
1966 F250 4x4
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
User avatar
Slick Fan
Posts: 4085
Joined: November 4, 2006, 5:09 pm
Location: UTAH...snow blows!

Post by Slick Fan »

Johnny Canuck wrote:LOL grant you are dating yourself by using the word "swipe" with that meaning

Bet you , like me, still go to the "record store" to buy music.
Guilty. :? :lol:
My "Slickitis" affliction began here...
Image


66 F100 CC/65 F100 CC/66 F250 CC
If it starts to rain, they'll tax the splash.
If you want to fish, they'll tax the bass.
If you plant a yard, they'll tax the grass.
If you don't play nice, they'll fine your *$#!
User avatar
Max
Posts: 3456
Joined: July 11, 2006, 11:53 am
Location: 29°35'07.00"N 95°09'07.49"W
Contact:
United States of America

Post by Max »

I don't think the word frugal applies like most folk outside of this type of hobby would understand it to mean. You have to be frugal in many ways to put these trucks back together.

But I get yer drift. I just like to call it being skillful instead.
"If you don't want to stand behind our Troops, feel free to stand in front of them."

1964 Ford F100
1967 US Army M416
Z-MAN
Posts: 213
Joined: May 21, 2007, 9:28 pm
Location: Houston

Post by Z-MAN »

I am defintely a pack rat, but it seems like I never need it til I throw it away.

Z

Ok & a lil frugal too.
Post Reply