New to Slick 60's...

A place for discussion of off topic subjects. Pretty much anything goes - just keep it civil, please!

Moderators: Casey 65, Kid

User avatar
clevor347
Posts: 154
Joined: April 17, 2008, 8:01 pm

Post by clevor347 »

Well funding plays a big roll in it right now... I'm thinking about just doing a basic rebuild on the bottom end right now. .30 over and .10 on everything else. With a set of scat forged I beam rods and some forged pistons and a main girdle with the rotating assembly balanced. Then run stock top end besides a cam and rebuilt heads until I get the money.. Top end is all bolt ons. :) it'd be pretty quick.. and i found a 400 dollar pair of ceramic coated hooker competition headers for 390 bucks... not bad. :) I intend on putting a reverse manual valve body on the c4 transmission and new planet gears.. Maybe a shift kit.. Other than that it'll be pretty close to stock.
1966 ford f100 - project on hold for now
1970 ford f100 - dd
1977 international harvester scout 2 - MUD :D
User avatar
The Big M
Posts: 1360
Joined: August 9, 2006, 3:03 pm
Location: Rocky View County, AB
Canada

Post by The Big M »

The aftermarket rods may be overkill for that application. I think reconditioned stock rods with upgraded fasteners would be fine.

If your truly on a budget, you may not even need to overbore. I have a 5.0 block that I know for a fact has over 200K miles on it, and there's still evidence of swirl marks from the factory hone. So you may be able to use some stock replacement pistons instead of aftermarket and just get the bores honed. In fact, I believe your existing pistons are forged...
User avatar
clevor347
Posts: 154
Joined: April 17, 2008, 8:01 pm

Post by clevor347 »

They are.. It's a 85 and they're 4 valve relieve forged pistons... I've heard alot about those rods being beefed up to, of course using arp fasteners.
1966 ford f100 - project on hold for now
1970 ford f100 - dd
1977 international harvester scout 2 - MUD :D
blackagatha
Posts: 2582
Joined: March 10, 2007, 12:49 am
Location: Arizona

Post by blackagatha »

the FEs are truly beastly engines. I love my 390. It seems though that stuff is a bit more expensive for them. I could have likely built a 351 with at least as much juice, mayhaps more for probaably a little less $$$.

And now Shelby himself is offering all aluminum FEs.... Man!
'63 with 390 & lots of juice. But never enough. Always want more.
ImageImageImage
User avatar
clevor347
Posts: 154
Joined: April 17, 2008, 8:01 pm

Post by clevor347 »

Yeah, I know! I'm thinking about getting one.. But just out of curiousity, what would be the easiest car to get a F.E. block out of a junkyard?
1966 ford f100 - project on hold for now
1970 ford f100 - dd
1977 international harvester scout 2 - MUD :D
blackagatha
Posts: 2582
Joined: March 10, 2007, 12:49 am
Location: Arizona

Post by blackagatha »

i dunno I've come to kinda hate the junkyards around tucson. I think best bet is to hit the newspaper, craigslist. That's what I did. Got a good rebuildable core from a Mercury Montclaire for like $300, tore it down and took it to the engine shop. Got it back with all the machining done and the internal parts purchased so I just had to get external stuff and put it together.

The FEs are a little heavy, and have a harder time finding all the cool parts (they ARE out there though, you just have to look a little harder, and pay a little more)

I am all about the cool factor though... And especially with my pentroof Mercury valve covers, it's cool. Sadly, the truck is not a Merc to go with the covers... haha ah it's ok...

Image

tell me that isnt cool.
And that's an old pic. she looks a bit better right now...
'63 with 390 & lots of juice. But never enough. Always want more.
ImageImageImage
Post Reply