Sunday Activities

A place for discussion of off topic subjects. Pretty much anything goes - just keep it civil, please!

Moderators: Casey 65, Kid

Post Reply
User avatar
dwbr
Posts: 474
Joined: July 16, 2007, 4:23 pm
Location: Pasadena TX

Sunday Activities

Post by dwbr »

Look how i spent my Sunday, pulled the motor swapped out torque converters, removed the too huge moroso oil pan, put a ford racing rear sump pan in, got the motor back in and 50% hooked up.. in an earlier thread i commented on the problems i was having with the torque converter, hope this was the fix, i put the old one back in that i know worked, wont have the 2400 stall, but i can live with that
Image
________
vapormatic vaporizer
Last edited by dwbr on February 7, 2011, 12:09 am, edited 2 times in total.
User avatar
ezernut9mm
Posts: 9141
Joined: July 21, 2006, 9:37 pm
Location: KCMO
Sweden

Post by ezernut9mm »

looks like you had fun! lol. man i need a garage.
always
"i believe i've achieved satisfaction".-bubbles
"should i be gettin" baked for this boys?"-bubbles


i could no longer keep "r.i.p.ing" all of our fallen brothers and sisters, so i say here, slick loads of love and much respect to all you beautiful people.
User avatar
clevor347
Posts: 154
Joined: April 17, 2008, 8:01 pm

Post by clevor347 »

Pretty motor.. I hope mine looks that good... That oil pan doesn't fit well? I thought about putting a kicked out rear sump into the truck.. I've always like the way they look. What issues did you have with it in the truck? Nice truck btw.

-clevor
1966 ford f100 - project on hold for now
1970 ford f100 - dd
1977 international harvester scout 2 - MUD :D
User avatar
61 Merc
Posts: 807
Joined: October 1, 2006, 1:46 am
Location: Medicine Hat, Alberta
Canada

Post by 61 Merc »

I took a picture this morning too, but not quite the same.

http://photos.globetrotter.net/albums/p ... am=2066275

You can see the motor sitting on the concrete behind the GM that is to go into the 63, but not quite the same.
61 Mercury SWB Uni - Project
62 Mercury SWB BBW - Race truck
63 Ford SWB Uni - Daily driver (Jinx)
63 Ford SWB Uni - Parts truck
User avatar
Alan Mclennan
Posts: 9324
Joined: October 14, 2006, 6:16 pm
Location: In the shed... Cranebrook NSW
Australia

Post by Alan Mclennan »

Heard it was cold Dean but wow :shock:


Alan,
Honey, If I say I`ll fix something I will, there`s no need to remind me every 6 months!!
66 f100 tabletop swb 351 Clevo C6 "Beryl"

Slick Stock 3 KCMO
Slick Stock 4 Altoona
Slick Stock 5 KCMO
Slick Stock 6 Altoona
Slick Stock 7 Salina KS
Slick Stock 8.............................. cry.gif
User avatar
Johnny Canuck
Posts: 8291
Joined: April 9, 2006, 11:14 pm
Location: Edmonton, Alberta.
Canada

Post by Johnny Canuck »

Yep, Dean. looks like my driveway, minus the Chev.
It's a race.. Will hell freeze over or will JC finish his truck first. Stay tuned..
User avatar
dwbr
Posts: 474
Joined: July 16, 2007, 4:23 pm
Location: Pasadena TX

Post by dwbr »

clevor347 wrote:Pretty motor.. I hope mine looks that good... That oil pan doesn't fit well? I thought about putting a kicked out rear sump into the truck.. I've always like the way they look. What issues did you have with it in the truck? Nice truck btw.

-clevor
it was just tooo big, i have an auto C-6 it covered the inspection cover, originally i had to bolt the flywheel on through the starter opening, it was too deep and was hitting on the cross member , i bought it for the extra capacity, but was just too much, the ford racing one fit great and it came with a one piece gasket too.
________
og kush seeds
Last edited by dwbr on February 7, 2011, 12:09 am, edited 1 time in total.
blackagatha
Posts: 2582
Joined: March 10, 2007, 12:49 am
Location: Arizona

Post by blackagatha »

nice. having a garage is great... I just wish ours had an apron on it like yours.that's pretty slick. ours just lets out into the dirt.


do you have any trouble with the engine hoist trying to flip over? We had a crappy old hoist that I think was actually an industrial battery crane for forklifts or something. It was WAY too wide, and short boom. Just barely worked to do the job on Aggie. My cousin brought over a boom extender (it was actually his dad's) for it to put the engine in his Javelin... It totally wanted to fall forward. He had a friend hanging on the hoist to counter balance it, had to lean really hard...


OH yeah, and he was using one of those stupid carb-plate lifting brackets... damn those look like a bad idea.... An 800 pound engine hanging by 4 un-graded 1/4-20 studs, screwed into a cast aluminum intake manifold.... man...
'63 with 390 & lots of juice. But never enough. Always want more.
ImageImageImage
User avatar
dwbr
Posts: 474
Joined: July 16, 2007, 4:23 pm
Location: Pasadena TX

Post by dwbr »

with the boom extended out any more it wants to teter over, thats why i have the old heads <not seen in that picture> to add more weight on the back

i was a little nervous about lifting the engine from the intake as well, but after reading numerous article on it and tensil strength etc,, i was a little more comfortable, i didn't waste any time leaving it on the lift as soon as it came out it was bolted to the engine stand, i left it hooked up cause i was working on the oil pan and wanted a little extra security

in all actuality the engine being lifted from the intake worked out rather well
and didn't cost me anything, i had the welder at work make the plate, the only issue i had was the engine tilt going back in, i put a ratchet strap across the front and adjusted it as needed
________
uhwh
Last edited by dwbr on February 7, 2011, 12:10 am, edited 1 time in total.
blackagatha
Posts: 2582
Joined: March 10, 2007, 12:49 am
Location: Arizona

Post by blackagatha »

I dunno. I will never be convinced. It terrifies me every time I see somebody use one. Granted I have never seen one fail, but I find something innately wrong with the idea. I will never lift an engine by anything other than a log chain and 3/8 GRADE 8 bolts into the heads...

yeah, it makes for leveling issues, etc. Not quite as easy, but it works, and I KNOW it aint dropping an engine on my vehicle....
'63 with 390 & lots of juice. But never enough. Always want more.
ImageImageImage
36truck
Posts: 3152
Joined: October 20, 2007, 8:32 pm
Location: Land of Sunshine AZ
United States of America

Post by 36truck »

Just pulled a 351W & 4spd out with the lift plate worked great. There is more than enough strength there to pull an engine with.
Tom Williams
ICEMAN6166
Posts: 11470
Joined: July 11, 2006, 11:28 am
Location: Dove Creek, Co. elevation 6842
Poland

Post by ICEMAN6166 »

pulled lots of engine/trans combos with this beam
3 2x8s nailed and glued together with angled bracing, have a steel channel to keep the chain from digging into the wood.
need concrete for cherry picker to roll on, tried plywood once but the wheels dug in.

[albumimg]566[/albumimg]
1966 F250 4x4
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
User avatar
Fanatic
Posts: 1568
Joined: July 14, 2006, 11:39 pm
Location: Leesport, PA

Post by Fanatic »

BA.........don't I remember a pic of yours with a truck on 2 bumper jacks and nylon straps tied on to keep it from falling over?
INEPTOCRACY: (in-ep'-toc-ra-cy) : a system of government where the least capable to lead are elected by the least capable of producing, and where the members of society least likely to sustain themselves or succeed are rewarded with goods and services paid for by the confiscated wealth of a diminishing number of producers.
Post Reply