Sell or Scrap?
Sell or Scrap?
I got a 4barrel intake for a FE block, yes a cast iron one.
I was going to use it but have since changed my mind.
Should I sale it or scrap it?
I got a c6 tranny off a 460 that has been setting up so it's only good for a core and I got a 8.5 pumpkin off a T-Bird that I doubt I will ever need that I am seriously considering selling for scrap.
The intake would add another 80lbs.
Anyone here interested in the intake let me know. I'll let it go cheap.
It's all cleaned up and painted and ready to install.
I was going to use it but have since changed my mind.
Should I sale it or scrap it?
I got a c6 tranny off a 460 that has been setting up so it's only good for a core and I got a 8.5 pumpkin off a T-Bird that I doubt I will ever need that I am seriously considering selling for scrap.
The intake would add another 80lbs.
Anyone here interested in the intake let me know. I'll let it go cheap.
It's all cleaned up and painted and ready to install.
'01 F150 Lightning
490RWHP
Gas Mileage? What's that?
Jerry
490RWHP
Gas Mileage? What's that?
Jerry
- FORDBOYpete
- Posts: 850
- Joined: July 21, 2006, 8:30 am
- Location: East Central Florida USA
- DV65CustomCab
- Posts: 1497
- Joined: July 18, 2006, 4:23 pm
- Location: Elizabethtown, PA

I'd take it, but the shipping wouldn't be worth it.
I see them on Ebay pretty frequently (intakes) and they rarely get bids. Not exactly rare I guess. But, they do flow very well. No reason to go aluminum unless weight is a concern, and on these trucks, it ain't!

I see them on Ebay pretty frequently (intakes) and they rarely get bids. Not exactly rare I guess. But, they do flow very well. No reason to go aluminum unless weight is a concern, and on these trucks, it ain't!
Stop The Longbed Hate! 
'65 F100 Custom Cab bought 2002/Sold 2014
Now: '93 F150 Lightning
'65 F100 Custom Cab bought 2002/Sold 2014
Now: '93 F150 Lightning
-
shawns fords
- Posts: 1111
- Joined: March 31, 2007, 11:34 am
- Location: Foxfield Colorado
- Contact:
I have two of them sitting here myself a 65 and a 68 intake, nobody wants either one. I am not going to scrap them out the 68 intake is off a S code mustang (mine) and the older one I cant even remember where I ended up with it but It is taller than the later one by a good inch and a half. they are not worth a fortune but should be saved for someone doing a restoration with the specific intake needed
I could use that C6 tranny
I could use that C6 tranny

this is the good side
You're welcome to the tranny Shawn. It was good when I pulled it. It's just been on the ground for over a year now. It was in my '69 LB. I parted it out and the trans is all I got left.
# on the intake is:
C5AES425C
The S may be an 8. Depends on how the light hits it.
# on the intake is:
C5AES425C
The S may be an 8. Depends on how the light hits it.
'01 F150 Lightning
490RWHP
Gas Mileage? What's that?
Jerry
490RWHP
Gas Mileage? What's that?
Jerry
-
shawns fords
- Posts: 1111
- Joined: March 31, 2007, 11:34 am
- Location: Foxfield Colorado
- Contact:
I am sure shipping would be a killer on me for tha trans, thanks for the offer. unless you plan to bring it to slick stock 2010 lol I am sure someone down there could use it for something
I dont have a reference to that intake in my interchange catalog but it looks like its a C5AE-9425-C which I believe is a 4 bbl intake from a car probably a T bird or Fairlane I would have to look around for my other identification book to see if I can figure it out, I also think it is probably the same intake I have downstairs lol
I am sure FBP or someone else already knows
I dont have a reference to that intake in my interchange catalog but it looks like its a C5AE-9425-C which I believe is a 4 bbl intake from a car probably a T bird or Fairlane I would have to look around for my other identification book to see if I can figure it out, I also think it is probably the same intake I have downstairs lol
I am sure FBP or someone else already knows

this is the good side
Just out of curiosity, you keeping the 2 bbl or ditching the FE?
1964 F 100 - I am going to do "something" with it.......
viewtopic.php?f=32&t=15942
1987 Mustang LX Convertible, 2.3 Auto - cruiser.
1994 F 150 XLT 2WD
~ Yes - I adopted another cat..............
Cam L Milan,
You'll be missed my friend.
viewtopic.php?f=32&t=15942
1987 Mustang LX Convertible, 2.3 Auto - cruiser.
1994 F 150 XLT 2WD
~ Yes - I adopted another cat..............
Cam L Milan,
You'll be missed my friend.
Keeping the 2 bbl.
Back when I was looking for power steering parts I grabbed this intake, valve covers, power steering brackets off a ;65 Galaxy at the salvage yard.
Gas prices being what they are and my driving being what it is I know if I got a 4 bbl I'm going to use it so it's in my budgets best interest not to install this intake.
Back when I was looking for power steering parts I grabbed this intake, valve covers, power steering brackets off a ;65 Galaxy at the salvage yard.
Gas prices being what they are and my driving being what it is I know if I got a 4 bbl I'm going to use it so it's in my budgets best interest not to install this intake.
'01 F150 Lightning
490RWHP
Gas Mileage? What's that?
Jerry
490RWHP
Gas Mileage? What's that?
Jerry
- dotcentral
- Posts: 1341
- Joined: August 18, 2006, 5:13 pm
- Location: Charlotte, NC
