a friend of mine told me about a thread he wrote on the hamb im going to try it on my seat frame looks like all of us could benefit from it so here ya go it take pics on how it works for me enjoy
John
http://www.jalopyjournal.com/forum/show ... hp?t=10461
rust removal the easy way
rust removal the easy way
2) 55 f100's
2) 65 f100's
and all the other ford trucks my wife doesn't know about!!
2) 65 f100's
and all the other ford trucks my wife doesn't know about!!
i have heard about this , but never tried it
looks simple enough
like the one guy said be sure to do it in a well VENTILATED place
looks simple enough
like the one guy said be sure to do it in a well VENTILATED place
.
.
.
'' I think what scares me the most about you guys is that I understand you '' ..... KID
'' lookin good, a little paint adds at least 100hp!'' ....... COOTER
'' well an old guy can dream cant he? ''............ICEMAN
''I would donate organs before selling my slick''........ HOOFBEAT RACER
.
.
'' I think what scares me the most about you guys is that I understand you '' ..... KID
'' lookin good, a little paint adds at least 100hp!'' ....... COOTER
'' well an old guy can dream cant he? ''............ICEMAN
''I would donate organs before selling my slick''........ HOOFBEAT RACER
I have used that for years redoing metal and it works great. Some of the local Civil war buffs use it to clean civil war objects like belt buckles. I use a 150 volt power suppy though, its a lot faster. I think I posted about it a few years ago here. What it does is to release the oxidation but leave metal alone. I found some old router bits my Dad had. The bucket had got rainwater in it and they had rusted really bad. I leaned them trying it out and I could actually use the bits. As far as it goes,the polarity is critical . Print out the instructions and go by them. Do not insert anything chrome!!! It will make the chrome release.It may leave a black patina on it that can be cleaned off with water and a scotchbrite pad. Just dry it and oil or paint the metal. Other than that is simple to use. I use it to restore old woodworking machines and I even used it on some of the parts on my truck Here are a few more links.
http://www.stovebolt.com/techtips/rust/ ... usting.htm
http://myweb.tiscali.co.uk/andyspatch/rust.htm
http://antique-engines.com/electrol.asp
http://www.stovebolt.com/techtips/rust/ ... usting.htm
http://myweb.tiscali.co.uk/andyspatch/rust.htm
http://antique-engines.com/electrol.asp
well everyone i tried that rust removal idea and it seemed to pretty good now i did use the washing soda they suggested could find it so i read you can also use baking soda so i did with some laundry detergent give it that fresh bubbly scent, i used rebar for my pos. terminal and the neg went to seat frame when i pulled out the part i hosed it off and brissle brushed it to get gunk. i didnt have a container big enough for whole seat so i had to do half at a time. i had a 6amp battery charger on the part for about 10 hours as soon as you put it on the water starts moving and hours later the water completely rust colored any way heres some pics.
John




John




2) 55 f100's
2) 65 f100's
and all the other ford trucks my wife doesn't know about!!
2) 65 f100's
and all the other ford trucks my wife doesn't know about!!

