found a few uni's today. edit for pics and update!

A place for discussion of off topic subjects. Pretty much anything goes - just keep it civil, please!

Moderators: Casey 65, Kid

fmartin_gila
Posts: 1021
Joined: April 21, 2007, 9:58 am
Location: Mandurriao, Iloilo City, Philippines

Post by fmartin_gila »

You do need to snag something. Then I could go to the next SS without being ambushed. They all look good to me.

Fred
User avatar
Johnny Canuck
Posts: 8291
Joined: April 9, 2006, 11:14 pm
Location: Edmonton, Alberta.
Canada

Post by Johnny Canuck »

Chris. looks like this one will buff right out
Image

What is with that 4x4? why does the drivers' side front wheel hang out of the fender like that?

Remember, wives do not see the potential in trucks that husbands do. Last time my buddy rolled up with a truck like that on a trailer, his wife literally started packing. :wink: Maybe need to feed her some whisky first
It's a race.. Will hell freeze over or will JC finish his truck first. Stay tuned..
User avatar
Hoofbeat Racer
Posts: 1782
Joined: July 6, 2006, 12:22 am
Location: Rocky Mountains, Alberta
Canada

Post by Hoofbeat Racer »

ras4434 wrote:ezernut: Dont understand what the problem is. Buy the truck and park it around the block from the house. Worked for me for almost 6 months. Was able to move three different trucks through with out the wife knowing. Happy wife, pile of parts and some $ from scrap with what was left over..............Good luck.........Ross
:rotflmao: I have contemplated that one too.

Go with the rusty one Chris, I would be leery of someone else's hack job on the 4x4. I feel your pain about needing to get another truck though.
Mark


Image
ICEMAN6166
Posts: 11470
Joined: July 11, 2006, 11:28 am
Location: Dove Creek, Co. elevation 6842
Poland

Post by ICEMAN6166 »

Johnny Canuck wrote:Chris. looks like this one will buff right out
Image

What is with that 4x4? why does the drivers' side front wheel hang out of the fender like that?

Remember, wives do not see the potential in trucks that husbands do. Last time my buddy rolled up with a truck like that on a trailer, his wife literally started packing. :wink: Maybe need to feed her some whisky first
the 4x4 tire looks goofy for sure but the other tire is flat and the truck is leaning.looks ok in the other pics.

not many guys are able to have unlimited collections.
long as i keep the wifes truck running or supply her one of mine i have no problems.no neighbor issues either.
1966 F250 4x4
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
Garbz

Post by Garbz »

Just remember my friend... Beer removes all pain, so drink a few and blame it on the booze made me do it..........

LOL

Garbz
ICEMAN6166
Posts: 11470
Joined: July 11, 2006, 11:28 am
Location: Dove Creek, Co. elevation 6842
Poland

Post by ICEMAN6166 »

1966 F250 4x4
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
36truck
Posts: 3152
Joined: October 20, 2007, 8:32 pm
Location: Land of Sunshine AZ
United States of America

Post by 36truck »

LOL Brian Rub it in. :lol: :lol:
Tom Williams
User avatar
ezernut9mm
Posts: 9141
Joined: July 21, 2006, 9:37 pm
Location: KCMO
Sweden

Post by ezernut9mm »

been down the last couple of days with the stomach flu or something evil.
i am really thinking about this truck. i just don't know about having three cars, plus the wife's around the house. i did get my trailer sold though. this is gonna make my brain smoke.

fred, i hope i didn't offend you with my "ambush". yours really was my favorite truck as ss. i just have a wierd way of showing it. lol
always
"i believe i've achieved satisfaction".-bubbles
"should i be gettin" baked for this boys?"-bubbles


i could no longer keep "r.i.p.ing" all of our fallen brothers and sisters, so i say here, slick loads of love and much respect to all you beautiful people.
User avatar
johnny
Posts: 326
Joined: June 16, 2008, 12:45 am
Location: san diego

Post by johnny »

ezernut9mm wrote:been down the last couple of days with the stomach flu or something evil.
i am really thinking about this truck. i just don't know about having three cars, plus the wife's around the house. i did get my trailer sold though. this is gonna make my brain smoke.

fred, i hope i didn't offend you with my "ambush". yours really was my favorite truck as ss. i just have a wierd way of showing it. lol
well hell ezernut no wonder you feel like hell look at your stomach its HUGE :rotflmao:

John (hope your ok couldnt resist)
2) 55 f100's
2) 65 f100's
and all the other ford trucks my wife doesn't know about!!
fmartin_gila
Posts: 1021
Joined: April 21, 2007, 9:58 am
Location: Mandurriao, Iloilo City, Philippines

Post by fmartin_gila »

You can't offend me - my OLD THICK HIDE prevents such assaults.

Fred
User avatar
ezernut9mm
Posts: 9141
Joined: July 21, 2006, 9:37 pm
Location: KCMO
Sweden

Post by ezernut9mm »

glad to hear it fred.

anyone ever propped up a cap with c-channel or angle iron?
always
"i believe i've achieved satisfaction".-bubbles
"should i be gettin" baked for this boys?"-bubbles


i could no longer keep "r.i.p.ing" all of our fallen brothers and sisters, so i say here, slick loads of love and much respect to all you beautiful people.
User avatar
Greg D
Posts: 10113
Joined: September 13, 2006, 4:39 pm
Location: Podunk Iowa
United States of America

Post by Greg D »

ezernut9mm wrote:glad to hear it fred.

anyone ever propped up a cap with c-channel or angle iron?

You mean cab? Look in my album, my cab mounts are 2x3 rectangle tubing. They are actually much stronger than the originals, much thicker metal plus a fully boxed section.
Or was it just slipped in under the floor to hold it up? My first slick had a 2x4 between the floor and the frame because the cab mounts were gone.
1964 F 100 - I am going to do "something" with it.......

viewtopic.php?f=32&t=15942

1987 Mustang LX Convertible, 2.3 Auto - cruiser.
1994 F 150 XLT 2WD


~ Yes - I adopted another cat..............

Cam L Milan,
You'll be missed my friend.
User avatar
ezernut9mm
Posts: 9141
Joined: July 21, 2006, 9:37 pm
Location: KCMO
Sweden

Post by ezernut9mm »

yeah, i meant "cab". lol i have seen the 2x4 trick before as well.
i think i am going to pass on this one. it is really, really rusty. the whole drivers side floorboard is gone. so is the step plate and wall. you can see daylight in the rear cab corner. the "new" gas tank is seeping. the seat is way past saving, etc, etc.
plus now he's wanting to keep the "innie" wheels and give over some later 15x5.5 wheels instead. he is also keeping the battery.
any one or two of these things wouldn't normally stop me, but all of this together and the fact that he want 600$ for a 300$ truck has me looking elsewhere.

like this, for example:

http://kansascity.craigslist.org/cto/852387908.html

Image

292, 4sp. looks like a cc. i'm going to look at it tomorrow.
always
"i believe i've achieved satisfaction".-bubbles
"should i be gettin" baked for this boys?"-bubbles


i could no longer keep "r.i.p.ing" all of our fallen brothers and sisters, so i say here, slick loads of love and much respect to all you beautiful people.
User avatar
Greg D
Posts: 10113
Joined: September 13, 2006, 4:39 pm
Location: Podunk Iowa
United States of America

Post by Greg D »

You should take a look at the 64 LWB I found off of the Rockport / I 29 exit.
VERY solid & straight truck, you could make a small patch for the drivers floor and call it good, definitely doesn't need a whole floor pan. No engine & tranny but it had a Windsor in it at one time. Body on it is real nice, Baby Blue Slick, pretty decent interior too. He was asking $700 for it, but you know cash talks. I don't have the guys # but it's real easy to see on the north side of Hwy 136 close to Phelps Mo. (he has about 15 cars & trucks lined up back there, bout 6 miles west of the exit). It was still there last Wednesday, he has had it for sale for about a year. I think that's his place in the upper left side (NW) of the intersection in this Satellite view.


http://maps.yahoo.com/#mvt=s&lat=40.403 ... 0City%20Mo.
1964 F 100 - I am going to do "something" with it.......

viewtopic.php?f=32&t=15942

1987 Mustang LX Convertible, 2.3 Auto - cruiser.
1994 F 150 XLT 2WD


~ Yes - I adopted another cat..............

Cam L Milan,
You'll be missed my friend.
User avatar
ezernut9mm
Posts: 9141
Joined: July 21, 2006, 9:37 pm
Location: KCMO
Sweden

Post by ezernut9mm »

the only problem with that greg, is that i'd have to find a way to haul it down here. then i'd have to come up with a power train.
i was wanting a winter driver that i wouldn't have to worry about getting salt on. even if it burns oil i only drive 50 miles a week back and forth to work and i could afford to put a quart a month in it or whatever.
if i get something too nice, bodywise, i'll be afraid to drive it in the snow.
still, thanks for your help and let me know if you come across any others.
always
"i believe i've achieved satisfaction".-bubbles
"should i be gettin" baked for this boys?"-bubbles


i could no longer keep "r.i.p.ing" all of our fallen brothers and sisters, so i say here, slick loads of love and much respect to all you beautiful people.
User avatar
ezernut9mm
Posts: 9141
Joined: July 21, 2006, 9:37 pm
Location: KCMO
Sweden

Post by ezernut9mm »

well, the 64 250 is a bust too. no radiator. the bed floor is gone and no tailgate. all the dash wiring is a garbled mess and it has four dead 16.5's. also, the brake pedal was forze up solid. probably about a grand worth of parts and tires to get going.
too bad, the cab is solid and all the trim is there. plus the hood was perfect. it would be a good parts truck for someone.
always
"i believe i've achieved satisfaction".-bubbles
"should i be gettin" baked for this boys?"-bubbles


i could no longer keep "r.i.p.ing" all of our fallen brothers and sisters, so i say here, slick loads of love and much respect to all you beautiful people.
User avatar
Johnny Canuck
Posts: 8291
Joined: April 9, 2006, 11:14 pm
Location: Edmonton, Alberta.
Canada

Post by Johnny Canuck »

LOL I love that "ran when parked thing."
Code for "Ran before the engine seized"

reminds me of the "Not sure but I think it's a 390" for every 352.
It's a race.. Will hell freeze over or will JC finish his truck first. Stay tuned..
User avatar
ezernut9mm
Posts: 9141
Joined: July 21, 2006, 9:37 pm
Location: KCMO
Sweden

Post by ezernut9mm »

right up there with "it was owned by a little old lady who only drove it to church on sunday". yep
always
"i believe i've achieved satisfaction".-bubbles
"should i be gettin" baked for this boys?"-bubbles


i could no longer keep "r.i.p.ing" all of our fallen brothers and sisters, so i say here, slick loads of love and much respect to all you beautiful people.
User avatar
Slick Fan
Posts: 4085
Joined: November 4, 2006, 5:09 pm
Location: UTAH...snow blows!

Post by Slick Fan »

I could probably find you an awesome deal around here, but there may be some shipping involved. :lol:
My "Slickitis" affliction began here...
Image


66 F100 CC/65 F100 CC/66 F250 CC
If it starts to rain, they'll tax the splash.
If you want to fish, they'll tax the bass.
If you plant a yard, they'll tax the grass.
If you don't play nice, they'll fine your *$#!
Post Reply