1964 f-100 front suspention Help please!!!!

The place to talk Slicks. All we ask is that discussion has something to do with slicks...

Moderators: Casey 65, Kid

Farmboy
Posts: 8
Joined: January 31, 2009, 9:53 pm
Location: Sevierville Tennessee

1964 f-100 front suspention Help please!!!!

Post by Farmboy »

I have just bought a 1964 f-100 short bed custom cab in really good shape. Well all except for the bed floor. I was looking for a 1966 but this one was just too nice to pass on so now its in the garage. I would like to change the front suspension to independent and get ride of that straight axle. will a 65 or 66 front suspention work on it. Also does anybody make a bed floor or will I have to use my imagination? Any help would be much appreciated. The bed is super nice and straight if it just had a floor in it that was in better shape!
1964 F-100 SWB Fleetside
DCarr
Posts: 1363
Joined: September 17, 2008, 11:49 pm
Location: Chino Valley , Az.

Post by DCarr »

Welcome to the club from ElCajon, Farmboy! welcome.gif . Don't be real quick to discount the straight axle, though. They work well when set up properly. If you want independent go with the Dodge Dakota setup from Industrial Chassis in Phoenix ,AZ.
Tune For Maximum Smoke ___________________________________ 64 F100 Longsmoothie 65 Mustang Fastback
User avatar
Greg D
Posts: 10113
Joined: September 13, 2006, 4:39 pm
Location: Podunk Iowa
United States of America

Post by Greg D »

For your bed floor you can buy patch panels and fix it or find a wrecked bed with a good floor.
As far as the suspension swap there are alot of options but straight axles rule! You also have alot of options with straight axles, read through my Uni's build thread an you'll see. There are few I haven't done yet too, look through Hints section. Here is a link to my truck...........


http://fordtruk.com/forums/viewtopic.php?t=9003
1964 F 100 - I am going to do "something" with it.......

viewtopic.php?f=32&t=15942

1987 Mustang LX Convertible, 2.3 Auto - cruiser.
1994 F 150 XLT 2WD


~ Yes - I adopted another cat..............

Cam L Milan,
You'll be missed my friend.
User avatar
ezernut9mm
Posts: 9141
Joined: July 21, 2006, 9:37 pm
Location: KCMO
Sweden

Post by ezernut9mm »

welcome aboard! you wanna trade??? lol. i have most of a 66 swb with a disc brake front end. ran when parked. heehee!
always
"i believe i've achieved satisfaction".-bubbles
"should i be gettin" baked for this boys?"-bubbles


i could no longer keep "r.i.p.ing" all of our fallen brothers and sisters, so i say here, slick loads of love and much respect to all you beautiful people.
DCarr
Posts: 1363
Joined: September 17, 2008, 11:49 pm
Location: Chino Valley , Az.

Post by DCarr »

Ezer, you're a shameless horsetrader. Just got to have a 64 ,don't you? :lol:
Tune For Maximum Smoke ___________________________________ 64 F100 Longsmoothie 65 Mustang Fastback
User avatar
ezernut9mm
Posts: 9141
Joined: July 21, 2006, 9:37 pm
Location: KCMO
Sweden

Post by ezernut9mm »

there is no such thing as pride when it comes to short straight axles. lol. who am i kidding, i don't have any pride anytime. lol
always
"i believe i've achieved satisfaction".-bubbles
"should i be gettin" baked for this boys?"-bubbles


i could no longer keep "r.i.p.ing" all of our fallen brothers and sisters, so i say here, slick loads of love and much respect to all you beautiful people.
slick4x4
Posts: 5725
Joined: April 19, 2008, 10:01 pm
Location: kipp kansas
United States of America

Post by slick4x4 »

welcome.gif from KANSAS

we need some more farmers in here !
.
.
.
'' I think what scares me the most about you guys is that I understand you '' ..... KID
'' lookin good, a little paint adds at least 100hp!'' ....... COOTER
'' well an old guy can dream cant he? ''............ICEMAN
''I would donate organs before selling my slick''........ HOOFBEAT RACER
Truckfarmer2
Posts: 328
Joined: May 8, 2008, 11:01 am
Location: Central Illinois
United States of America

Post by Truckfarmer2 »

Welcome to another farmer! Where are you from? There are dozens of choices for your truck depending on your projected use, skills, and budget.
If you continue to buy imports, where will your children work?
Farmboy
Posts: 8
Joined: January 31, 2009, 9:53 pm
Location: Sevierville Tennessee

Post by Farmboy »

Truckfarmer2 wrote:Welcome to another farmer! Where are you from? There are dozens of choices for your truck depending on your projected use, skills, and budget.
Im from Tennessee. At the foot of the Smoky Mtns. I work for a utility district and farm on the side. Thanks for making me feel welcome. I'm building amild street/daily driver out of the old girl and just want a good driving,riding,running truck that can answer the bark of the small block chevys. Eveyone I work with accept a couple or chevy guys and the think I'm nuts for even likeing Fords. I tell them that owning a chevy truck is like cleaning up after a 2 year old toddler.(you know,sweeping up the rust and all). And I like to shut my truck door without first picking up on it. And then theres that rattle comming from the dash! I could go on all day but you get the picture. I would like to put power steering to her and disc brake. I've also got a hot little 351 winsor and c6 combo planned. I am particularly after a 327 that a big mouth buddy of mine owns. And I AM gonna get him one way or another.
1964 F-100 SWB Fleetside
Farmboy
Posts: 8
Joined: January 31, 2009, 9:53 pm
Location: Sevierville Tennessee

Post by Farmboy »

DCarr wrote:Welcome to the club from ElCajon, Farmboy! welcome.gif . Don't be real quick to discount the straight axle, though. They work well when set up properly. If you want independent go with the Dodge Dakota setup from Industrial Chassis in Phoenix ,AZ.
I'm just not familiar with the straight axles. I may be screwing up and just don't know it. What I'm after is a decent ride and good handling and stopping. What type of power steering fits it. I also would like a little more room between the steering wheel and my gutt. I'm a big guy anyway and I could use the extra room.
1964 F-100 SWB Fleetside
Farmboy
Posts: 8
Joined: January 31, 2009, 9:53 pm
Location: Sevierville Tennessee

Post by Farmboy »

Greg D wrote:For your bed floor you can buy patch panels and fix it or find a wrecked bed with a good floor.
As far as the suspension swap there are alot of options but straight axles rule! You also have alot of options with straight axles, read through my Uni's build thread an you'll see. There are few I haven't done yet too, look through Hints section. Here is a link to my truck...........


http://fordtruk.com/forums/viewtopic.php?t=9003
Fine looking ride you got there. Hope mine turns out that good.
1964 F-100 SWB Fleetside
User avatar
61 Merc
Posts: 807
Joined: October 1, 2006, 1:46 am
Location: Medicine Hat, Alberta
Canada

Post by 61 Merc »

Farmboy wrote: I also would like a little more room between the steering wheel and my gutt. I'm a big guy anyway and I could use the extra room.
Well this must be first for this club. :lol:

A straight axel can be set up quite nice, even with armstrong steering. If you do go independent, go to the dakota front end, it is not worth the effort to graft a twin I beam onto the front.

For a new bed floor, there was an article about using a newer F150 bed that had good dimentions. Drop Tom a line at Flashback F100's as he deals with new and used parts. PlcThom@AOL.COM

Welcome to the club, had a chance to cruise some of that area a few years ago, you'll have to get it done for the Smokey Mountain F100 run.

Dean
61 Mercury SWB Uni - Project
62 Mercury SWB BBW - Race truck
63 Ford SWB Uni - Daily driver (Jinx)
63 Ford SWB Uni - Parts truck
BackyardRest

Post by BackyardRest »

I found the 2008 F250 bed floor is correct in dimensions. The stamping is a touch different but works out well. The corners are not as sharp as the earlier bed floors as in these pics.

Approx 200 spot welds to take out when removing floor

Mark-K makes a stainless/wood floor which is another option.

I did something a while back on bed replacement but my pics are gone but plan on re-posting them soon. ALong with when I actually install the new 2008 floor

Image
Image
Image
BackyardRest

Post by BackyardRest »

Image
Image
Image
User avatar
61 Merc
Posts: 807
Joined: October 1, 2006, 1:46 am
Location: Medicine Hat, Alberta
Canada

Post by 61 Merc »

I thought it was you BackyardResto that did the swap, was it posted in your Project Sideoiler post? I know I was looking for it last fall also, couldn't find it then either.

Dean
61 Mercury SWB Uni - Project
62 Mercury SWB BBW - Race truck
63 Ford SWB Uni - Daily driver (Jinx)
63 Ford SWB Uni - Parts truck
User avatar
jwh f-100
Posts: 1903
Joined: June 11, 2007, 6:25 pm
Location: Equinunk, PA
United States of America

Post by jwh f-100 »

BYR,
I want to do the same thing. I looked at two smashed beds last year but both floors were a bit dinged up for my liking. :cry: I guess I need to price a new floor......
Did you remove the Xmembers from the superduty bed yet?? I'd be interested in how you make out with that....
Jason

Beer will change the world.

I don't know how but it will.
kenk96
Posts: 37
Joined: January 7, 2009, 6:39 pm
Location: Lawrenceville, NJ
Contact:

Post by kenk96 »

Greg D,

You stated that patch panels are available for the '64. iIcan only find them for '67 and newer. Any ideas?
User avatar
Johnny Canuck
Posts: 8291
Joined: April 9, 2006, 11:14 pm
Location: Edmonton, Alberta.
Canada

Post by Johnny Canuck »

Farmboy wrote: just want a good driving,riding,running truck that can answer the bark of the small block chevys. Eveyone I work with accept a couple or chevy guys and the think I'm nuts for even likeing Fords. I tell them that owning a chevy truck is like cleaning up after a 2 year old toddler.(you know,sweeping up the rust and all). And I like to shut my truck door without first picking up on it. And then theres that rattle comming from the dash! I could go on all day but you get the picture. I would like to put power steering to her and disc brake. I've also got a hot little 351 winsor and c6 combo planned. I am particularly after a 327 that a big mouth buddy of mine owns. And I AM gonna get him one way or another.
Indeed them peckers need to be beat back down in the snake-hole they came from time to time. :bangin: It's up to you to do it. :thumright: :cheers:
It's a race.. Will hell freeze over or will JC finish his truck first. Stay tuned..
Farmboy
Posts: 8
Joined: January 31, 2009, 9:53 pm
Location: Sevierville Tennessee

Post by Farmboy »

61 Merc wrote:
Farmboy wrote: I also would like a little more room between the steering wheel and my gutt. I'm a big guy anyway and I could use the extra room.
Well this must be first for this club. :lol:

A straight axel can be set up quite nice, even with armstrong steering. If you do go independent, go to the dakota front end, it is not worth the effort to graft a twin I beam onto the front.

For a new bed floor, there was an article about using a newer F150 bed that had good dimentions. Drop Tom a line at Flashback F100's as he deals with new and used parts. PlcThom@AOL.COM

Welcome to the club, had a chance to cruise some of that area a few years ago, you'll have to get it done for the Smokey Mountain F100 run.

Dean
Thats the way it is with us greenhorns I guess. Pigeon Forge is just up the road from me. And Knoxville is down the road a mile or two so I will get to hit all the shows in this area. Drop me a line when it gets a little closer to the shows and I will look you up. I'm just glad to be here among the ones who know these trucks in and out. Thanks
User avatar
Greg D
Posts: 10113
Joined: September 13, 2006, 4:39 pm
Location: Podunk Iowa
United States of America

Post by Greg D »

I think the rib pattern is the same in 67. If you are willing to travle I may be persuaded out of the swb 62 bed I have in my backyard - the floor is pretty much perfect. Enough $ to get me the later 250 floor would do it so I could get a 8' and save myself patching.
1964 F 100 - I am going to do "something" with it.......

viewtopic.php?f=32&t=15942

1987 Mustang LX Convertible, 2.3 Auto - cruiser.
1994 F 150 XLT 2WD


~ Yes - I adopted another cat..............

Cam L Milan,
You'll be missed my friend.
Post Reply