1964 f-100 front suspention Help please!!!!
BTW, with the right Toyota 4x4 Steering box PS is doable. Mine actually drives just fine even with the 225 x 60s on it and the 14" steering wheel. Having the front end in good condition, well greased and properly inflated tires can make a world of difference on one. It's also alot easier to plan ahead just enough to always be moving at least a little while you are turning. This comes a bit more natural to me though, my first car had standard steering and about 40% of them since too. My rotator cuffs are shot and I can manage mine just fine.
1964 F 100 - I am going to do "something" with it.......
viewtopic.php?f=32&t=15942
1987 Mustang LX Convertible, 2.3 Auto - cruiser.
1994 F 150 XLT 2WD
~ Yes - I adopted another cat..............
Cam L Milan,
You'll be missed my friend.
viewtopic.php?f=32&t=15942
1987 Mustang LX Convertible, 2.3 Auto - cruiser.
1994 F 150 XLT 2WD
~ Yes - I adopted another cat..............
Cam L Milan,
You'll be missed my friend.
Do you know which steering box it is.All I can find just goes to 1960. I'd like to get one and some king of an aftermarket column to give me a little more room behind the wheel. I've seen a couple of power disc brake conversions on the net and I'm gonna do that upgrade too! Just wating of a few parts books to get here in the mail and then I'm gonna down her and get started! But dealing with the suspense is killing me. I wish I was smokin the back tires now instead of looking at it setting in the garage with no parts to work on it with.Greg D wrote:BTW, with the right Toyota 4x4 Steering box PS is doable. Mine actually drives just fine even with the 225 x 60s on it and the 14" steering wheel. Having the front end in good condition, well greased and properly inflated tires can make a world of difference on one. It's also alot easier to plan ahead just enough to always be moving at least a little while you are turning. This comes a bit more natural to me though, my first car had standard steering and about 40% of them since too. My rotator cuffs are shot and I can manage mine just fine.
the toyota box is an early 80s box. i bought a door off someone over in maryville few months ago he joined here and all he ever posted was in the classified section.he said he had one he just had to find it he also had alot of rust free stuff.ill see if i can find his email.hes over in maryville just off hte motor mile
Ryan
61 Ford f100 Unibody short bed
351w/Aod
61 Ford f100 Unibody short bed
351w/Aod
the toyota box is an early 80s box. i bought a door off someone over in maryville few months ago he joined here and all he ever posted was in the classified section.he said he had one he just had to find it he also had alot of rust free stuff.ill see if i can find his email.hes over in maryville just off hte motor mile
Ryan
61 Ford f100 Unibody short bed
351w/Aod
61 Ford f100 Unibody short bed
351w/Aod
-
Garbz
- Johnny Canuck
- Posts: 8291
- Joined: April 9, 2006, 11:14 pm
- Location: Edmonton, Alberta.

Thats a nice looking rig you got there.Garbz wrote:Here is a shot of a 88 truck tilt column installed in my 64 "Christine"
[albumimg]294[/albumimg]
It is pretty simple, It hangs on a 427 rod bracket and I double D ground the steering box stub and attached the column to the box with the stock 88 ford through bolt.
The tilt works nice.
Garbz
[/img]
If I new for sure what it was I could probably find one at the pull-a-part junkyard. If you've never been there you should check it out. Nicest junkyard I've ever been in.61ford wrote:the toyota box is an early 80s box. i bought a door off someone over in maryville few months ago he joined here and all he ever posted was in the classified section.he said he had one he just had to find it he also had alot of rust free stuff.ill see if i can find his email.hes over in maryville just off hte motor mile
You want the toy power steering box from a live axle 4x4 pickup or 4 runner (84 & older?) it's easy to spot the right one - it's location on the frame is in front of the axle. If you are seeing this listed as a swap for a 1960 works basically the same on a 61-64.
1964 F 100 - I am going to do "something" with it.......
viewtopic.php?f=32&t=15942
1987 Mustang LX Convertible, 2.3 Auto - cruiser.
1994 F 150 XLT 2WD
~ Yes - I adopted another cat..............
Cam L Milan,
You'll be missed my friend.
viewtopic.php?f=32&t=15942
1987 Mustang LX Convertible, 2.3 Auto - cruiser.
1994 F 150 XLT 2WD
~ Yes - I adopted another cat..............
Cam L Milan,
You'll be missed my friend.
-
Garbz
Jason
Look to a 73 to 79 for a new bed floor. You can cut off the quarters and place the bed sides of a 61 to 66 on them and they fit really well. Much easier than placing a floor and all those spot welds.
I did this for the Suicide Crew i built using a 79 tub and 63 quarter panels from a Uni.
Garbz
Look to a 73 to 79 for a new bed floor. You can cut off the quarters and place the bed sides of a 61 to 66 on them and they fit really well. Much easier than placing a floor and all those spot welds.
I did this for the Suicide Crew i built using a 79 tub and 63 quarter panels from a Uni.
Garbz
-
Garbz
Hmmmmm But then I'd need to shorten it....Garbz wrote:Jason
Look to a 73 to 79 for a new bed floor. You can cut off the quarters and place the bed sides of a 61 to 66 on them and they fit really well. Much easier than placing a floor and all those spot welds.
I did this for the Suicide Crew i built using a 79 tub and 63 quarter panels from a Uni.
Garbz
found another floor at LMC http://www.lmctruck.com/Features/FC/FCSTY.htm
Jason
Beer will change the world.
I don't know how but it will.
Beer will change the world.
I don't know how but it will.
-
Garbz

