Convert 1966 f250 truck to 4wd

The place to talk Slicks. All we ask is that discussion has something to do with slicks...

Moderators: Casey 65, Kid

Post Reply
ermcswain
Posts: 2
Joined: February 8, 2009, 8:38 pm
Location: North Carolina near Gastonia

Convert 1966 f250 truck to 4wd

Post by ermcswain »

I would to find a late model ford 4wd truck which I could switch my 1966 f 250 cab and bed to the 4wd frame and restore as a 4wd vehicle. If remember correctly my truck has a 131 inch wheelbase. Does anyone have any experience switching a 66 2d to 4d. thank you
36truck
Posts: 3152
Joined: October 20, 2007, 8:32 pm
Location: Land of Sunshine AZ
United States of America

Post by 36truck »

:welcome: from Mi. With a 131 wheelbase on your truck a newer one has 133 wheelbase. Might be able to cheat that. How about the floor for the trans hump?
Tom Williams
User avatar
FORDMANLCRACKEL
Posts: 1237
Joined: July 11, 2006, 9:48 pm
Location: williamston, n.c.
Contact:
United States of America

Post by FORDMANLCRACKEL »

Richard, welcome.gif as far as the transmision hump use the removable cover from the doner truck. Its the black piece in the pic. below. Worked for me.

Image

Lonnie
The most rewarding job i ever had was being a dad.
1988 Ranger Build http://s275.photobucket.com/albums/jj31 ... %20RANGER/
Anthony

Post by Anthony »

welcome aboard ermcswain from West Virginia. Where are you located? my 66 is on a mid 70's highboy frame....after removal of the bed..[albumimg]4908[/albumimg]...donor truck..[albumimg]4909[/albumimg]....frame cleaned and painted..[albumimg]4263[/albumimg]....body back on..[albumimg]4230[/albumimg]....body back off and how she sits right now..[albumimg]4882[/albumimg]...I believe that the gap between cab and bed will be a little wider but not too noticable, it wasn't on the white truck when I brought it home. luck.gif .Anthony
User avatar
in2hotrods
Posts: 191
Joined: August 1, 2007, 8:13 pm
Location: STL, MO.

Post by in2hotrods »

Welcome to the board! What is your location? There are members here from all over...someone might have just what you need. For example. Next weekend I should be dragging home a 1966 F250 4x4 to part out. Interested? PM me.

Rich
1963 Fairlane Four-Door (Cruiser)

1966 Crew Cab (Project) View My Build Thread
User avatar
don morris II
Posts: 347
Joined: November 18, 2008, 12:29 pm
Location: Muskegon, MI

Post by don morris II »

hi from michigan :welcome:
FORD, FAST, FLYING, FIRST, ALL START WITH F IS,NT THAT "SLICK"
otterbull
Posts: 5
Joined: March 29, 2008, 10:10 am
Location: NW Ohio

Post by otterbull »

I have a 65 currentlt sitting on a 78 frame. Cab bolts right up. I still need to mon=ve the rear spring hangers foreward 2.5 inches If I remember right. Havent worked on it for a while. In ohio not to far from you I believe. Bull
77 f-250 4x4
63 short uni
61 long uni
65 4x4
65 longbed
57 shortbed
66 bronco
75 bronco w plow
04 superduty diesel 4x4
63 mercury longbed stepside
currently 6 parts trucks
Wife says too much junk
Post Reply