Three point seat belts

The place to talk Slicks. All we ask is that discussion has something to do with slicks...

Moderators: Casey 65, Kid

Post Reply
Lowell
Posts: 751
Joined: August 21, 2006, 8:01 pm
Location: Southern Indiana
United States of America

Three point seat belts

Post by Lowell »

Im thinking about ordering the three point seat belts from G.E.M Streetrod products, and wondering if anyone had problems installing them. I have a seat from a Deluxe cab so ther is less space between the door and the seat to work with. Right now i have Lap belts from a brand x vehicle installed by the P. O.
cdherman
Posts: 1048
Joined: July 17, 2006, 6:36 pm
Location: Parkville MO (KC)

Post by cdherman »

I used them. No real problems -- you should have access to a welder to weld a nut on a length of strap metal. You will slip that down behind the inside rear corner stiffeners to anchor the thrid point.

GEM sends so very heavy round plates that you use under the cab floor to prevent pull out there. I was able to use the 65 in floor seatbelt anchors for the inside attachments, but the outer (by the door) I did not like where Ford put them (the tensioners take more space than then orignal lap belts do). So I drilled new holes, as I recall.....

Overall, I am very pleased. Nice and safe. Certainly better than junk-yard makeshift work. They have lots of colors too....
1965 F-100 240 Autolite 1101, Disk brake dual master upgraded, swapped over to C4 and powersteering. Bought by my Dad new in March 65'

1683

Planned/considered upgrades:
Perhaps power brakes, 300 I6 motor and JUST maybe, AC!
Alex
Posts: 9
Joined: March 24, 2007, 11:16 pm
Location: Kingston Washington

Post by Alex »

I installed a set from SeatBelt4Less Sales $168.00(Andover Company,Maryland) They can match your interior or exterior color. I fastened the retractable mechanism to top of Fuel Tank. Make sure your length is longer then 120 inches if want to fasten somerwhere else. Goodluck.
cdherman
Posts: 1048
Joined: July 17, 2006, 6:36 pm
Location: Parkville MO (KC)

Post by cdherman »

Alex wrote:I fastened the retractable mechanism to top of Fuel Tank..
:roll: :?: :?: :?:

On first blush that statement sounds a little worrisome. Perhaps you can elaborate and ease my mind. I'd hate to see you in an accident where the impact pulls the tensioner out of the thin metal around the top of the gas tank and not only lets you hit the steering wheel, but thereafter douses you with gasoline.....

I suspect you didn't exactly attach it to the top of the fuel tank......
1965 F-100 240 Autolite 1101, Disk brake dual master upgraded, swapped over to C4 and powersteering. Bought by my Dad new in March 65'

1683

Planned/considered upgrades:
Perhaps power brakes, 300 I6 motor and JUST maybe, AC!
Alex
Posts: 9
Joined: March 24, 2007, 11:16 pm
Location: Kingston Washington

Post by Alex »

Heavily reinforced from the Deck on up. A picture would Have been alot better, but its Dark Here. I had to improvise with the short SeatBelt length.I did know what length to order. Thanks Alex
Lowell
Posts: 751
Joined: August 21, 2006, 8:01 pm
Location: Southern Indiana
United States of America

Post by Lowell »

Thanks for the replies, everyone, Been wanting to make my 65 just a little safer.
Phil
Posts: 2125
Joined: June 1, 2007, 9:37 pm
Location: toledo

Post by Phil »

Post Reply