New Vinyl for Door Pockets

needmoretime · Post by **needmoretime** » June 24, 2009, 5:16 pm

Finally a look at the new vinyls for old door pockets. Let me know what colors you would like to see available. I have a upholster on hand.

Currrently working out cost which will be based on interest.

[albumimg]5990[/albumimg]

[albumimg]5991[/albumimg]

[albumimg]5992[/albumimg]

Wayne

ICEMAN6166 · Post by **ICEMAN6166** » June 24, 2009, 5:35 pm

voted "other"

black to match the dash pads is needed.

Gritsngumbo · Post by **Gritsngumbo** » June 24, 2009, 5:37 pm

Wayne: I would be in for three (3)...But not necessarily all at the same time, maybe over a few months. Red, Grey and White. (I could only vote for one color). Any solution for replacement of the trim pieces? All the ones I have are cracked. They may be usable, but they aren't perfect. BTW: They look really good.

Hoofbeat Racer · Post by **Hoofbeat Racer** » June 24, 2009, 10:07 pm

Ice, I have black ones. I got them from Bob Drake. They are very nice.

Someone was making billet alum trim rings once upon a time. JC got me some from SS2 and they are beautiful

Johnny Canuck · Post by **Johnny Canuck** » June 24, 2009, 11:25 pm

Mark they came from Wayne, who started this post.
Wayne I want grey.

Max · Post by **Max** » June 24, 2009, 11:37 pm

Would it be at all possible if we sent you our own material to do the pockets if we had a specific color? Not sure how you're going to have these set up.

needmoretime · Post by **needmoretime** » June 25, 2009, 6:00 am

As soon as i get a price I will pass it on. Zippers IMO were always an issue. I found a source in limited colors. I don't see your request as a problem. I also would like to get an old cc door panel and see what he could do with that as well.

My thought is he could make a bunch of these vinyls to supply an otherwise scarce item that seems to be an issue when dealing with used door pockets or replacing the black ones that come from Drake (that are very nice BTW)

Again, finding a zipper source that would look good was my hang up.

Thanks,

jwh f-100 · Post by **jwh f-100** » June 25, 2009, 6:45 am

Hi Wayne,,

I didn't vote..

It will be a while before I can start thinking about my interior.. Here is a thought though, what about a silver / stainless zipper on all colors?? I think it would look great with the trim..

needmoretime · Post by **needmoretime** » June 25, 2009, 2:52 pm

Zippers are a tough item. I'll check!

Thanks,

Gritsngumbo · Post by **Gritsngumbo** » June 25, 2009, 3:41 pm

Maybe someone with an original door panel not in use, will "loan" you one. I only have an aluminum one I made and a black plastic "re-pop".

Hoofbeat Racer · Post by **Hoofbeat Racer** » June 25, 2009, 4:57 pm

Johnny Canuck wrote:

Mark they came from Wayne, who started this post.
Wayne I want grey.

Thanks Wayne, didn't realize they came from you. Had many compliments on them. I have a spare door pocket that is original and I will probably never use. Can send it to you if you want.

needmoretime · Post by **needmoretime** » June 25, 2009, 5:19 pm

Hey Mark,
I will find a macster that may have an old panel. I have door buckets but thanks anyway. Just trying to think of what we would liek to see available that does not require an on site custom job everytime we turn around.

Keeping it simple I hope!

Need any scuff plates for your inside steps??

Hoofbeat Racer · Post by **Hoofbeat Racer** » June 25, 2009, 11:38 pm

I would love a set. Let's see what you got

Sinc · Post by **Sinc** » June 27, 2009, 9:42 am

Hey Wayne,

They look GREAT! Nice work (as always).

How about some shade of green for the guys with stock Holly Green Slicks?

Later...Bill

New Vinyl for Door Pockets

what color vinyls would you like to see?

New Vinyl for Door Pockets