Low stance=$$$$$$ 64 F 100

The place to talk Slicks. All we ask is that discussion has something to do with slicks...

Moderators: Casey 65, Kid

Unibodyguy1

Low Stance= $$$$ 64 F100

Post by Unibodyguy1 »

Unifan,
what are yu running for a front suspention on this one??

Michael
User avatar
UNIFAN
Posts: 274
Joined: August 22, 2007, 11:07 pm
Location: TN

Post by UNIFAN »

Thanks Kevin and good eye on those jambs! This truck kinda got outta hand. If I would have known it was going to get to this point with the jambs etc when starting I would have moved the brakes under the floor and smoothed out the drivers firewall also and modified the inner aprons some more but hey you got to stop somewhere if you ever want to drive them! The hole in the lower fire wall is for my harness with grommet. It is going to be fuel injected as I hope to drive this truck a bunch. :D
User avatar
TxSlick66
Posts: 207
Joined: March 28, 2009, 6:11 pm
Location: Ovilla, TX
Contact:

Too low for me, BUT...

Post by TxSlick66 »

If I could get $14k for mine, I would take the springs OFF!
TxSlick66
aka MustangSteve

Money you ENJOY wasting is NOT wasted money...
User avatar
UNIFAN
Posts: 274
Joined: August 22, 2007, 11:07 pm
Location: TN

Re: Low Stance= $$$$ 64 F100

Post by UNIFAN »

Unibodyguy1 wrote:Unifan,
what are yu running for a front suspention on this one??

Michael
I have always used a TCI version of the MustangII. Without getting into a debate they have always worked very well for me as my trucks have not really been used to haul or tow excessive weights. I like how they install and the availabilty of parts along with how clean the install can appear and you can run it with coil springs. coil overs, or air bags and change your mind at any time as to which. :)
blackagatha
Posts: 2582
Joined: March 10, 2007, 12:49 am
Location: Arizona

Post by blackagatha »

that's pretty sick- both of them



it appears that the new uni is going to be a lot more finished??? haha it's got the finished quality of a BENTLEY! way to go dude.




The draggin the ground stance is cool, but not Aggie's bottle of scotch... I figure that due to my mentally questionable love for the straight axle, 4 inches would be a good dropped height, and possibly all the way up to stock ride height if I felt so inclined to pump it up.

I have no right to blabber though, I have yet to do any of the stuff I blabber about, I just have an old beat up truck cab sitting patiently for the day it can give its donation, in my mom's front yard....
'63 with 390 & lots of juice. But never enough. Always want more.
ImageImageImage
User avatar
65f100_Thug
Posts: 612
Joined: October 13, 2008, 9:09 pm
Location: Arkansas
United States of America

Post by 65f100_Thug »

65f100_Thug wrote:Man anytime a slick sells for that much It helps us all in my opinion!
I like it too,although i would probably end up smacking something with it.
Let me clarify what I meant by that comment. I was riding down the road thinking about it and yah if you have a slick or a slick for sale it helps. But If you're like allot of us looking to buy more maybe it wont help too much. Assuming people have common sense LOL and realize the junker in the pasture is NOT Barrett Jackson material.

LOVE the firewall and door jams!!! I wish I could do that too but at this point if I can get it fairly slick (pun intended) and get it painted before I die of old age Ill be doing good. Sometimes I think I should adopt Chris's mentality on the deal and not even paint it.That way I wont be afraid to drive it.

Keep us updated with pics I love'em, they are worth a thousand words and allot easier to type LOL
HAVE YOU DISASSEMBLED A FORD LATELY?

10136 98349929981298119816
Phil
Posts: 2125
Joined: June 1, 2007, 9:37 pm
Location: toledo

Post by Phil »

So. Pretty.



Put a web cam on that Uni 24/7.
I'll stare at that one even when your not working on it.
Post Reply