Slick 60's

Posted: **February 16, 2010, 2:13 am**

Just thought I would do a little run down on myself. I'm new here but on just about every traditional hot rod forum there is. I'm 24 and a husband and father first, Hotrodder and GEARHEAD second.

I've owned my 63 F100 since I was 15, and am almost 25, its seen several stages from stock to mud truck and now it is getting a lowered suspension and a wild little 302. Engine will be around 10:1 compression, small chamber 1963 289 heads with 2.02/1.60 valves, high nodular iron crank, hypereutectic H.O. style flat top 4 valve relief pistons, stock "small bolt" rods, Comp BIG MUTHA THUMPR cam, comp valve springs, comp lifters, comp rocker arms, comp pushrods, tunnel ram single 4 intake with spread bore 750 carb.

Posted: **February 16, 2010, 3:19 am**

Hey SF !!

Welcome...

Your truck sounds cool...do you have pics ???

Regards,

Ricky.

Posted: **February 16, 2010, 7:37 am**

Welcome! Sounds like a cool project!

Posted: **February 16, 2010, 9:55 am**

Welcome from Georgia. It sounds like you and your truck have been through many changes. It sounds like you are building an all out race motor, what other changes are you planning for the drivetrain?

I am guessing by your screename you must also be a Kurt Vonnegut fan. on of my favorite quotes from him is "We must be careful about what we pretend to be."

Posted: **February 16, 2010, 10:40 am**

from Arizona!

Posted: **February 16, 2010, 11:30 am**

f r o m
K A N S A S

Posted: **February 16, 2010, 12:54 pm**

Welcome from Tennessee!

Posted: **February 16, 2010, 5:15 pm**

Welcome from West Virginia.... sounds cool, do you have any pics???

Posted: **February 16, 2010, 8:14 pm**

Welcome from South Carolina. And we like pics.

Posted: **February 16, 2010, 8:29 pm**

Welcome again from Houston.
Sounds like a very nice truck.
We need pictures.
I have a '62 - actually its a '63 with a '62 grill......
Wanna race for beers?

U@ss

Posted: **February 16, 2010, 9:18 pm**

Welcome from the cold northeast. The 302 sounds sweet! Do give some pics if possible.

Posted: **February 16, 2010, 11:17 pm**

SICK!

I'm surprised you retained the stock rods with all of that extra.... the "small bolts" seem kinda well, small.....

Posted: **February 16, 2010, 11:57 pm**

pics or ban! lol. welcome from kansas city.

Posted: **February 17, 2010, 1:07 pm**

Welcome from Wisconsin!!

Posted: **February 17, 2010, 8:25 pm**

Welcome from Iowa...Let's see some pics of that bad boy.

Posted: **February 17, 2010, 8:34 pm**

Welcome to Slick 60s.

Posted: **February 18, 2010, 2:18 am**

From the foot of the Blue Mountains,

Posted: **February 19, 2010, 3:58 pm**

Thanks for all the kind welcomes. My screen name is also my shop name, it is derived from my last name of Schlotterbeck (pronounced slaughterback). The truck is in pieces but I will try to find one of the before pics and get some engine pics soon. No MAJOR mods will be done to the driveline, just a well built automatic with stall converter and a 9 inch with limited slip in the rear.

Posted: **February 20, 2010, 12:37 am**

Welcome to the site. Looking forward to seeing a few photos if you can dig some up.

Posted: **February 20, 2010, 12:44 pm**

from Alabama!

Slick 60's

New guy with hot rod 63

New guy with hot rod 63