Fuel Cell Installation

unibodyboy · Post by **unibodyboy** » March 9, 2010, 12:09 am

First, have to say thanks to both Skip for the original inspiration for this idea from what seems like ten years ago, and also the charlie for some more recent additional ideas.

Spent about two days making from start to finish, but in my opinion it was very well worth it. All was well until I added gas and realized the tank bung hadn't been tightened enough by the factory. It added a few hours.

For some reason it won't let me post these, but here are some links.

http://fordtruk.com/forums/album_pic.ph ... ser_id=214

http://fordtruk.com/forums/album_pic.ph ... ser_id=214

http://fordtruk.com/forums/album_pic.ph ... ser_id=214

Alan Mclennan · Post by **Alan Mclennan** » March 9, 2010, 12:34 am

Nice job Greg!, what tank did you use?

dwbr · Post by **dwbr** » March 9, 2010, 11:10 am

would like to see pics from the bottom as well

as far back as that is and being in the bed,
hope you have long arms, or your going o be crawling in the bed
to gaser up

i have one just mounted in the bed, and with those vapor recovery pumps i gotta lean all over the tailgate to push down to get the flow out

________
Toyota TF104 specifications

ABA · Post by **ABA** » March 9, 2010, 6:42 pm

dwbr wrote:would to see pics from the bottom as well

as far back as that is and being in the bed,
hope you have long arms, or your going o be crawling in the bed
to gaser up

i have one just mounted in the bed, and with those vapor recovery pumps i gotta lean all over the tailgate to push down to get the flow out

]

I guess you can really say you're haulin.........gas, huh.

I'm hoping to find a tank that will fit in my bed box. Might have to be custom made.