Slick 60's

Whats your take on running a ALUMINUM RADIATOR in a 66 f250 4x4! The top tank on my 66 split today! then its 500$ to have it reworked + 50 miles to the shop!

Found this with a LifeTime Warranty

http://www.ebay.com/itm/290677868807?ss ... 1423.l2649

Unless you are going for origanality by all means order the radiator.

My radiator is for a 1970's 460. Bolted up perfect, and cools mighty fine.
Check my gallery for pictures and comparisons of the old brass one with the new aluminum one side by side.

banjopicker66 wrote:My radiator is for a 1970's 460. Bolted up perfect, and cools mighty fine.
Check my gallery for pictures and comparisons of the old brass one with the new aluminum one side by side.

IS your tanks aluminum? The one im looking at is 100% aluminum all TigWelded.

No, I went the cheapest route. It has an aluminum core with plastic tanks.

I have 66 F100 2wd core support , I have a 1976 460 going in the truck and this radiator measurements are the same. When I typed in 66 352 the same radiator part # came up for both the 76 460 and the 66 352. I will order it tomorrow and post how well it fits.

Is the hood clearance for the radiator on a 66 different than a 64?

Just wondering if the taller tanks would work in a 64.

Also, did you get the new radiator installed?




J

Hood should be the same for a 64 , not installed yet. I ordered it from O'Reilly's $239 plus tax and it's gloss black powder coated. It looks awesome !

Here's the link

http://www.oreillyauto.com/site/c/detai ... d=radiator

I just called the store and ordered it , if it doesn't work for some odd reason , you can return it to O'Reilly's