Antique Car Disease

A place for discussion of off topic subjects. Pretty much anything goes - just keep it civil, please!

Moderators: Casey 65, Kid

Post Reply
User avatar
Johnny Canuck
Posts: 8291
Joined: April 9, 2006, 11:14 pm
Location: Edmonton, Alberta.
Canada

Post by Johnny Canuck »

Doc Pepper wrote: To anybody in this group who thinks their junk is worth a fortune ( I am sure there aren't any ... well maybe a few Canadians), please ... enlighten me.
Doc
I have a bench seat from a 78 F100 and a ripped up one from a '63.
first $3000 takes them. Hurry , rare!

keywords Shelby/ Holman Moody/ Idiot
It's a race.. Will hell freeze over or will JC finish his truck first. Stay tuned..
User avatar
Greg D
Posts: 10113
Joined: September 13, 2006, 4:39 pm
Location: Podunk Iowa
United States of America

Post by Greg D »

At the Fathers day Mustang show I had my 85 in, guy comes through the lot SLOWLY pulling a trailer with a 79 Pace Car mustang on it. Car was complete, no body damage and little if any appreciable rust, 302 4 speed, and well equipped. It did how ever need a TOTAL restoration including ALOT of interior pieces replaced. These Mustangs value between about $2200 to $12000 with a median price of $9000 for a nice car, guy had flyers with all 3 of these values and the MIDDLE one was circled - was asking $8300 for his $2200 car.
1964 F 100 - I am going to do "something" with it.......

viewtopic.php?f=32&t=15942

1987 Mustang LX Convertible, 2.3 Auto - cruiser.
1994 F 150 XLT 2WD


~ Yes - I adopted another cat..............

Cam L Milan,
You'll be missed my friend.
User avatar
Greg D
Posts: 10113
Joined: September 13, 2006, 4:39 pm
Location: Podunk Iowa
United States of America

Post by Greg D »

Greg D wrote:At the Fathers day Mustang show I had my 85 in, guy comes through the lot SLOWLY pulling a trailer with a 79 Pace Car mustang on it. Car was complete, no body damage and little if any appreciable rust, 302 4 speed, and well equipped. It did how ever need a TOTAL restoration including ALOT of interior pieces replaced. These Mustangs value between about $2200 to $12000 with a median price of $9000 for a nice car, guy had flyers with all 3 of these values and the MIDDLE one was circled - was asking $8300 for his $2200 car.
Very nice truck BTW, the small amount of rust in the seams of the lower door pillars does need attended to but still very nice.
Drivers side hood spear is there take a look at the back-to-front drivers side shot.
Banjo, I think that may be a tach from a big Slick.
1964 F 100 - I am going to do "something" with it.......

viewtopic.php?f=32&t=15942

1987 Mustang LX Convertible, 2.3 Auto - cruiser.
1994 F 150 XLT 2WD


~ Yes - I adopted another cat..............

Cam L Milan,
You'll be missed my friend.
willy3486
Posts: 817
Joined: July 11, 2006, 10:31 am
Location: Smithville TN

Post by willy3486 »

Its that way with everything. Years ago I use to redo old radios . I could get the console usually at 25 bucks average. One day I ran across a lady who had a tabletop that half the wood was missing with no tubes. It was worth maybe 50 cents at the most for parts. She wanted 25 bucks. She wanted new price for tubes,5-25 bucks. You could buy whole cases then for 5-10 bucks. Now I have got into redoing old campers. I was looking for a scotty. I ran across one that was probably only worth 50-100 bucks for parts. It was less than 10 miles from home. Most of the skin was tore and glass busted. The thing was almost caving it. The idiot wanted 600 bucks!!!! I have seen them it decent shape for less. He thought it was worth that since "someone" wanted it for a lawnmower trailer. I told the jerk you could buy a new trailer made for a lawnmower for about 500 at Tractor supply. I got one without the gate that folds down for only 300 new!! Well I lucked up and picked up a scotty yesterday. About a 300 mile round trip. The price? Freebee!!! He gave it to me because he wanted to see someone restore it. I have looked for about a year but I finally found one like I wanted. So I know what you mean, the world is full of people who think just because the same thing they have gets big bucks restored in perfect condition.
User avatar
bigtrip460
Posts: 305
Joined: February 4, 2007, 7:34 pm
Location: OHIO!
Contact:

Post by bigtrip460 »

my brother sold his rice and we are looking for a torino/fairlane/falcon for him. there was a 66 galaxie waggy on ebay and it said buy it here for this before I take it to pamona and sell it for 4 grand. :roll: I think nearly every ad for the cars I am looking at all said "rare" or something similar. I can appreciate people trying to get a fair market value but its just getting silly. if something IS rare and actually IS something special I can see paying a good amout for it. boss9 heads, 429CJ block and heads, an inline 4 barrel carb and intake, you know... GOOD stuff, should pull a good price. an inline 6 falcon that needs work should NOT be 5-7 grand.imo
User avatar
Johnny Canuck
Posts: 8291
Joined: April 9, 2006, 11:14 pm
Location: Edmonton, Alberta.
Canada

Post by Johnny Canuck »

IMO it's Kevin Marti to blame for the "Rare" malarkey we see everywhere now. Mustangs are common as houseflies, so Marti reports that yours is 1/100 with radio delete option and rubber floor mats instead of carpet and that makes it "Rare"
:roll:

Rare, is not necessarily desirable. a 250 six 3 on the tree 73 mustang with rubber floor mats might be rare, but not worth a pinch of coon spit to most.
It's a race.. Will hell freeze over or will JC finish his truck first. Stay tuned..
shawns fords
Posts: 1111
Joined: March 31, 2007, 11:34 am
Location: Foxfield Colorado
Contact:

Post by shawns fords »

how about a 69 mustang coupe with engine code "S" Designating it to be a GT390? with all options from factory (excluding front disc brakes)
less than 11,000 S codem ustangs total sold from 67-69, thats less than all shelbys combined from 65-70, yet these cars dont take in near as much in value dollarwise because it doesnt say GT350 or GT500 on the side, yet the S code mustang is just as famous from a popular movie "Bullitt"
hmmmmm
User avatar
Johnny Canuck
Posts: 8291
Joined: April 9, 2006, 11:14 pm
Location: Edmonton, Alberta.
Canada

Post by Johnny Canuck »

Hey Shawn I know that's your baby, and I don't wanta be farting in church. Bullitt cars are seriously popular and much cloned.One of my favourite movies of all time, and one of only about 8 that I own.But all accounts of that movie say now mater what the techs did to the Mustang, it could not keep up with the Charger. Now, if you were talking the (quickly assembled after Ford found that out) 428 car, you would really have some bragging rights.
Not that I would kick a 390 Mustang out of bed for eating crackers. Nice car. And ,you proved my point, from the previous post, re: Kevin Marti.
It's a race.. Will hell freeze over or will JC finish his truck first. Stay tuned..
shawns fords
Posts: 1111
Joined: March 31, 2007, 11:34 am
Location: Foxfield Colorado
Contact:

Post by shawns fords »

Johnny the one from the film was heavily modified for purposes to keep up with that charger, of course it was not the most powerfull stang on the market at that time either. and a FE is a real screamer when built properly, hell my 390 had 428 rods in it. and since the 390 is gone its getting a 428 service block, I aint even worried about its resale value, ill be able to sell it for what I will want because im not greedy, I just want to finish the race car with the money from the 69, too bad we all cant keep everything we want. of course I have to be involved with a hobby that involves barret jackson, which has made a huge effect on my purchasing power on parts. I will never understand why someone would pay 100k plus for something to just sit on a spot in their private collection for noone to ever see again, or to pull it to a show on a trailor, roll it out of trailor, park it under a tent, put it back in and go home with a trophy for something thats never used for what it was built for. A good guy is like my buddys Dad who came out of retirement after 25 years to race an original 426 Hemi 68 road runner 4 speed car and winning races with it :lol: hes using it what its built for, not to collect funds
User avatar
bigtrip460
Posts: 305
Joined: February 4, 2007, 7:34 pm
Location: OHIO!
Contact:

Post by bigtrip460 »

http://cgi.ebay.com/ebaymotors/1970-For ... dZViewItem


^ check out this guys description of the" rare almost never driven 100
% mechanically sound unmolested torino"...

look this thing over and tell me he isnt fishing.
User avatar
Johnny Canuck
Posts: 8291
Joined: April 9, 2006, 11:14 pm
Location: Edmonton, Alberta.
Canada

Post by Johnny Canuck »

"The rust is surface with a few holes on the fenders, having said that the floors and frame are 100% solid – no issues there."
:rotflmao: :rotflmao: :rotflmao:
It's a race.. Will hell freeze over or will JC finish his truck first. Stay tuned..
shawns fords
Posts: 1111
Joined: March 31, 2007, 11:34 am
Location: Foxfield Colorado
Contact:

Post by shawns fords »

3 bids, 565 bucks and reserve is not met, those cars used to be given away its only 40 miles away from me, anyone want me to drive down there and take a gander? :lol:
User avatar
bigtrip460
Posts: 305
Joined: February 4, 2007, 7:34 pm
Location: OHIO!
Contact:

Post by bigtrip460 »

the bids gone up?!
User avatar
Alan Mclennan
Posts: 9324
Joined: October 14, 2006, 6:16 pm
Location: In the shed... Cranebrook NSW
Australia

Post by Alan Mclennan »

:shock: I`ve never seen one of those before we`re pretty limited down here though!. He says only driven twice a year but hit something every time :oops: ,but like the 351 8) .Alan
User avatar
bigtrip460
Posts: 305
Joined: February 4, 2007, 7:34 pm
Location: OHIO!
Contact:

Post by bigtrip460 »

lol good point.
User avatar
Greg D
Posts: 10113
Joined: September 13, 2006, 4:39 pm
Location: Podunk Iowa
United States of America

Post by Greg D »

That car is rough but definately VERY restorable.
There were actually 2 GTs built for the Movie Bullitt, one of them still exists nearly the same as it was in the movie. The other car was parted/crushed after the movie was made. It was in pretty bad shape after all the stunts.
I have this issue, look at the cover story, lol.

http://www.primediabackissues.com/Merch ... y_Code=MTM
1964 F 100 - I am going to do "something" with it.......

viewtopic.php?f=32&t=15942

1987 Mustang LX Convertible, 2.3 Auto - cruiser.
1994 F 150 XLT 2WD


~ Yes - I adopted another cat..............

Cam L Milan,
You'll be missed my friend.
Phil
Posts: 2125
Joined: June 1, 2007, 9:37 pm
Location: toledo

Post by Phil »

Johnny Canuck wrote:"The rust is surface with a few holes on the fenders, having said that the floors and frame are 100% solid – no issues there."
:rotflmao: :rotflmao: :rotflmao:
Hideaways in that condition $700-$1000, Shaker $1200+, Buckets $200 in that condition, Dashpad $600+, Good washer jug $100+

Car is save-able but if the cowl is bad (and I bet it is) I'd pass.
Someday I'll get another slick :(
Image
shawns fords
Posts: 1111
Joined: March 31, 2007, 11:34 am
Location: Foxfield Colorado
Contact:

Post by shawns fords »

its up to 2400 bucks, about 2 years ago an original one of only one ever made and it was only about 50% left black/black 70 torino sold for over 11,000 bucks and was in worshe shape than this one by far
reserve still not met
oh shakers new are under 400 bucks now
Post Reply