Page 1 of 1
ezernut vs. autolite 1100
Posted: July 14, 2013, 2:06 pm
by ezernut9mm
round 1. ding ding.

Re: ezernut vs. autolite 1100
Posted: July 14, 2013, 4:15 pm
by Shadow
Chris Your On The Right Track. Leave It On The Cookie Sheet & Bake At 350 For 3-1/2 Hrs Or Until Carburetor Is Golden Brown. (Don't Forget To Grease Cookie Sheet With Non Stick Spray) LOL..
Re: ezernut vs. autolite 1100
Posted: July 14, 2013, 7:39 pm
by kstones63
Okay, Who won this round?
Kevin
Re: ezernut vs. autolite 1100
Posted: July 14, 2013, 7:53 pm
by Brians1966
Watch out for round 2 Chris that's where the 1100 will get ya !!!!
Re: ezernut vs. autolite 1100
Posted: July 14, 2013, 9:08 pm
by ezernut9mm
well now, that went way better than expected. the problem i was having was that it wouldn't idle the same way twice. i took everything apart, blew thru all of the passages and put everything back together. the float was set a couple 32nds low so i fixed that and the anti stall (return idle) dashpot wasn't adjusted either, so i spec'd that out too. reinstalled the carb and it basically fired right up. a little idle adjustment and it was purring llike a kitten. now it idles like it should. awlrite!
Re: ezernut vs. autolite 1100
Posted: July 15, 2013, 8:11 pm
by Brians1966
Glad its running good

Re: ezernut vs. autolite 1100
Posted: July 15, 2013, 11:00 pm
by ezernut9mm
i haven't actually driven it yet brian. lol. don't jinx it! lol
Re: ezernut vs. autolite 1100
Posted: July 24, 2013, 9:08 pm
by RhodySlick'63
How many beers? Heha