Page 1 of 1

Now this is just WRONG!

Posted: January 13, 2008, 7:22 pm
by Greg D

Posted: January 13, 2008, 7:31 pm
by FORDMANLCRACKEL
From what i've read Robert Yates helped design the heads. He just started with he already knew about Ford and made it work on a chebby. Still wrong any way ya look at it.

Lonnie

Posted: January 13, 2008, 10:25 pm
by 36truck
I watched that on 460Ford and it is just dumb. Why even try that. :?: :shock: :evil:

Posted: January 14, 2008, 8:49 am
by Johnny Canuck
Wonder what intake he is figuring on using..???!!!

Posted: January 14, 2008, 10:14 am
by shawns fords
im sure its a hand made sheet metal intake JC.
I dont know the reasoning behind the idea, I know them heads are supposed to flow big numbers, but it would have to cost a pretty penny to adapt them to a windsor. prob alot more than a nice set of good flowing trick flows or AFRs. doesnt actaully make any sence to me. 30 years ago when there wasnt a bunch of aftermarket heads I could understand. Maybe he owns a machine shop and had both laying around? thats what usually triggers these crazy ideas :lol:

Posted: January 14, 2008, 10:26 am
by Johnny Canuck
Hey this crap
http://images.customclassictrucks.com/f ... _f100+.jpg
doesn't make any dam sense to me either, but there are those who insist on putting square pegs into round holes.. :roll:

Posted: January 14, 2008, 10:40 am
by shawns fords
Johnny Canuck wrote:Hey this crap
http://images.customclassictrucks.com/f ... _f100+.jpg
doesn't make any dam sense to me either, but there are those who insist on putting square pegs into round holes.. :roll:
That kind of stuff would be cool if only one guy did it, I will never understand why there are so many sheep in this hobby. The difference between men and sheep. one man comes up with a cool different way to do something, then 400,000 sheep follow. and for the next 50 years they will continue to make up "excuses" as to why they did it. The sad part, today the trades of hands on skills is dying fast. schools are continuing to drop their shop classes. now the rich guy just hires someone to do this work, and when it is finished he drives it around telling everyone its his. I wonder if thats whats going on with them LS1 heads?

Posted: January 14, 2008, 2:22 pm
by Garbz
Letsee....

its 1926..........And a certian guy neamed Henry was forced to change his position and build the Model A. If this ass had his way we would still be driving model Ts.....

Innovation is the driving force. Henry would have been left behind if he didnt change, and we would all be driving mercedes or beemers...

Garbz

Posted: January 14, 2008, 5:59 pm
by FORDMANLCRACKEL
Here is the thread if you care to read it. http://460ford.com/viewtopic.php?t=1892 ... stock+rods
I cant believe they havent baned him from the forum.

Lonnie

Posted: January 14, 2008, 7:36 pm
by Garbz
They actually seem to encourage out of the box thinking.

Not like here......

Garbz

Posted: January 14, 2008, 8:43 pm
by Paul Merrell
I like to think out of the box but why reinvent the wheel :?: There are so many options out there to get more power than doing it the hard way. You know what's the sad part is he may finish his car or truck and then sell it on ebay and then the new owner will have to find someone willing to work on it. I have done some mods on my truck but I have no intentions of selling it. But the mods I have done I think help the truck value not decrease it :!:

Posted: January 14, 2008, 9:10 pm
by FORDMANLCRACKEL
I remember Garbz saying "why reinvent the wheel" on here a few times.
I guess it must be ok to do it as long as you us Chevy parts on a Ford.
It also said on 460ford.com that someone had put 351c heads on a sbc, and im pretty sure it p.o. the chevy boys. I pretty sure neither combo will make anyone rich by building either one. Maybe someone will take a Mopar block put a Chevy head on one side and a Ford head on the other and maybe a revirse rotation crank. Then that would p.o. Ford and Chevy at the same time. Come to think of it ya just dont see the Mopar boys doing things like that.

Lonnie

Posted: January 15, 2008, 6:08 pm
by Greg D
FORDMANLCRACKEL wrote: Come to think of it ya just dont see the Mopar boys doing things like that.

Lonnie
I am not sure I'd call him a Ford guy. In racing it has been the thing forever to adapt non brand parts to a car, axles, distributors & the like. Heads from another brand of engine goes too far IMHO. Bad enough that the hot combo in a Ford "street rod" is a chebby engine.
I do however know a guy who rods Chevys (has a real cool 37 2 door sedan) and uses Chevy engines in them. I respect him cause I know I'll never see a 351 Cleveland in his 40 Chevy pickup or the 37. Funny thing is, his 37 Chevy 2 door was the first pre 1950 hotrod I ever rode in.

Posted: January 15, 2008, 7:56 pm
by FORDMANLCRACKEL
:iagree: with ya Greg 100%. The percent of the members at 460ford,com that thought it was cool was very low. Considering the member count is 13,000+ members. Garbz did make a good point, saying that Henry Ford was hard headed in resisting change. He was that. It took a lot of talking on his sons part to get him to change the design of the Model T to a new look and something besides black for a color. Even though things at Ford have changed with a lot of different motor to choose from for an old Ford people are still going to put a Chevy in a Ford no matter what.

Lonnie

Posted: January 15, 2008, 9:05 pm
by Greg D
Well no chevy motor in my old Ford,
Y block, 3x2s or 2x4s, and zoomie headers for me!

Posted: January 15, 2008, 9:13 pm
by 36truck
FORDMANLCRACKEL You are right not many of the 460 guy's care about this thing the guy is building. Why go through the work to do it??

Posted: January 15, 2008, 10:00 pm
by Comet
Garbz wrote:They actually seem to encourage out of the box thinking.

Not like here......

Garbz
Hahaa! :lol: :lol: :oops:

Posted: January 15, 2008, 10:11 pm
by FORDMANLCRACKEL
Greg D wrote:Well no chevy motor in my old Ford,
Y block, 3x2s or 2x4s, and zoomie headers for me!
Once again :iagree: with ya Greg.

Lonnie