Now this is just WRONG!

A place for discussion of off topic subjects. Pretty much anything goes - just keep it civil, please!

Moderators: Casey 65, Kid

Post Reply
User avatar
Greg D
Posts: 10113
Joined: September 13, 2006, 4:39 pm
Location: Podunk Iowa
United States of America

Now this is just WRONG!

Post by Greg D »

1964 F 100 - I am going to do "something" with it.......

viewtopic.php?f=32&t=15942

1987 Mustang LX Convertible, 2.3 Auto - cruiser.
1994 F 150 XLT 2WD


~ Yes - I adopted another cat..............

Cam L Milan,
You'll be missed my friend.
User avatar
FORDMANLCRACKEL
Posts: 1237
Joined: July 11, 2006, 9:48 pm
Location: williamston, n.c.
Contact:
United States of America

Post by FORDMANLCRACKEL »

From what i've read Robert Yates helped design the heads. He just started with he already knew about Ford and made it work on a chebby. Still wrong any way ya look at it.

Lonnie
The most rewarding job i ever had was being a dad.
1988 Ranger Build http://s275.photobucket.com/albums/jj31 ... %20RANGER/
36truck
Posts: 3152
Joined: October 20, 2007, 8:32 pm
Location: Land of Sunshine AZ
United States of America

Post by 36truck »

I watched that on 460Ford and it is just dumb. Why even try that. :?: :shock: :evil:
Tom Williams
User avatar
Johnny Canuck
Posts: 8291
Joined: April 9, 2006, 11:14 pm
Location: Edmonton, Alberta.
Canada

Post by Johnny Canuck »

Wonder what intake he is figuring on using..???!!!
It's a race.. Will hell freeze over or will JC finish his truck first. Stay tuned..
shawns fords
Posts: 1111
Joined: March 31, 2007, 11:34 am
Location: Foxfield Colorado
Contact:

Post by shawns fords »

im sure its a hand made sheet metal intake JC.
I dont know the reasoning behind the idea, I know them heads are supposed to flow big numbers, but it would have to cost a pretty penny to adapt them to a windsor. prob alot more than a nice set of good flowing trick flows or AFRs. doesnt actaully make any sence to me. 30 years ago when there wasnt a bunch of aftermarket heads I could understand. Maybe he owns a machine shop and had both laying around? thats what usually triggers these crazy ideas :lol:
Image

this is the good side
User avatar
Johnny Canuck
Posts: 8291
Joined: April 9, 2006, 11:14 pm
Location: Edmonton, Alberta.
Canada

Post by Johnny Canuck »

Hey this crap
http://images.customclassictrucks.com/f ... _f100+.jpg
doesn't make any dam sense to me either, but there are those who insist on putting square pegs into round holes.. :roll:
It's a race.. Will hell freeze over or will JC finish his truck first. Stay tuned..
shawns fords
Posts: 1111
Joined: March 31, 2007, 11:34 am
Location: Foxfield Colorado
Contact:

Post by shawns fords »

Johnny Canuck wrote:Hey this crap
http://images.customclassictrucks.com/f ... _f100+.jpg
doesn't make any dam sense to me either, but there are those who insist on putting square pegs into round holes.. :roll:
That kind of stuff would be cool if only one guy did it, I will never understand why there are so many sheep in this hobby. The difference between men and sheep. one man comes up with a cool different way to do something, then 400,000 sheep follow. and for the next 50 years they will continue to make up "excuses" as to why they did it. The sad part, today the trades of hands on skills is dying fast. schools are continuing to drop their shop classes. now the rich guy just hires someone to do this work, and when it is finished he drives it around telling everyone its his. I wonder if thats whats going on with them LS1 heads?
Image

this is the good side
Garbz

Post by Garbz »

Letsee....

its 1926..........And a certian guy neamed Henry was forced to change his position and build the Model A. If this ass had his way we would still be driving model Ts.....

Innovation is the driving force. Henry would have been left behind if he didnt change, and we would all be driving mercedes or beemers...

Garbz
User avatar
FORDMANLCRACKEL
Posts: 1237
Joined: July 11, 2006, 9:48 pm
Location: williamston, n.c.
Contact:
United States of America

Post by FORDMANLCRACKEL »

Here is the thread if you care to read it. http://460ford.com/viewtopic.php?t=1892 ... stock+rods
I cant believe they havent baned him from the forum.

Lonnie
The most rewarding job i ever had was being a dad.
1988 Ranger Build http://s275.photobucket.com/albums/jj31 ... %20RANGER/
Garbz

Post by Garbz »

They actually seem to encourage out of the box thinking.

Not like here......

Garbz
User avatar
Paul Merrell
Posts: 377
Joined: July 17, 2006, 7:06 pm
Location: Wilson N.C.

Post by Paul Merrell »

I like to think out of the box but why reinvent the wheel :?: There are so many options out there to get more power than doing it the hard way. You know what's the sad part is he may finish his car or truck and then sell it on ebay and then the new owner will have to find someone willing to work on it. I have done some mods on my truck but I have no intentions of selling it. But the mods I have done I think help the truck value not decrease it :!:
"Never underestimate the power of your actions. With one small gesture you can change a person's life - For better...or for worse." 1965 F250 4wheeldrive 390/4speed/dana 60 rear 3.73/dana 44/PB
User avatar
FORDMANLCRACKEL
Posts: 1237
Joined: July 11, 2006, 9:48 pm
Location: williamston, n.c.
Contact:
United States of America

Post by FORDMANLCRACKEL »

I remember Garbz saying "why reinvent the wheel" on here a few times.
I guess it must be ok to do it as long as you us Chevy parts on a Ford.
It also said on 460ford.com that someone had put 351c heads on a sbc, and im pretty sure it p.o. the chevy boys. I pretty sure neither combo will make anyone rich by building either one. Maybe someone will take a Mopar block put a Chevy head on one side and a Ford head on the other and maybe a revirse rotation crank. Then that would p.o. Ford and Chevy at the same time. Come to think of it ya just dont see the Mopar boys doing things like that.

Lonnie
The most rewarding job i ever had was being a dad.
1988 Ranger Build http://s275.photobucket.com/albums/jj31 ... %20RANGER/
User avatar
Greg D
Posts: 10113
Joined: September 13, 2006, 4:39 pm
Location: Podunk Iowa
United States of America

Post by Greg D »

FORDMANLCRACKEL wrote: Come to think of it ya just dont see the Mopar boys doing things like that.

Lonnie
I am not sure I'd call him a Ford guy. In racing it has been the thing forever to adapt non brand parts to a car, axles, distributors & the like. Heads from another brand of engine goes too far IMHO. Bad enough that the hot combo in a Ford "street rod" is a chebby engine.
I do however know a guy who rods Chevys (has a real cool 37 2 door sedan) and uses Chevy engines in them. I respect him cause I know I'll never see a 351 Cleveland in his 40 Chevy pickup or the 37. Funny thing is, his 37 Chevy 2 door was the first pre 1950 hotrod I ever rode in.
1964 F 100 - I am going to do "something" with it.......

viewtopic.php?f=32&t=15942

1987 Mustang LX Convertible, 2.3 Auto - cruiser.
1994 F 150 XLT 2WD


~ Yes - I adopted another cat..............

Cam L Milan,
You'll be missed my friend.
User avatar
FORDMANLCRACKEL
Posts: 1237
Joined: July 11, 2006, 9:48 pm
Location: williamston, n.c.
Contact:
United States of America

Post by FORDMANLCRACKEL »

:iagree: with ya Greg 100%. The percent of the members at 460ford,com that thought it was cool was very low. Considering the member count is 13,000+ members. Garbz did make a good point, saying that Henry Ford was hard headed in resisting change. He was that. It took a lot of talking on his sons part to get him to change the design of the Model T to a new look and something besides black for a color. Even though things at Ford have changed with a lot of different motor to choose from for an old Ford people are still going to put a Chevy in a Ford no matter what.

Lonnie
The most rewarding job i ever had was being a dad.
1988 Ranger Build http://s275.photobucket.com/albums/jj31 ... %20RANGER/
User avatar
Greg D
Posts: 10113
Joined: September 13, 2006, 4:39 pm
Location: Podunk Iowa
United States of America

Post by Greg D »

Well no chevy motor in my old Ford,
Y block, 3x2s or 2x4s, and zoomie headers for me!
1964 F 100 - I am going to do "something" with it.......

viewtopic.php?f=32&t=15942

1987 Mustang LX Convertible, 2.3 Auto - cruiser.
1994 F 150 XLT 2WD


~ Yes - I adopted another cat..............

Cam L Milan,
You'll be missed my friend.
36truck
Posts: 3152
Joined: October 20, 2007, 8:32 pm
Location: Land of Sunshine AZ
United States of America

Post by 36truck »

FORDMANLCRACKEL You are right not many of the 460 guy's care about this thing the guy is building. Why go through the work to do it??
Tom Williams
User avatar
Comet
Posts: 775
Joined: July 5, 2006, 10:03 pm
Location: Charleston, SC

Post by Comet »

Garbz wrote:They actually seem to encourage out of the box thinking.

Not like here......

Garbz
Hahaa! :lol: :lol: :oops:
My Slick is rustier than your Slick! :D
User avatar
FORDMANLCRACKEL
Posts: 1237
Joined: July 11, 2006, 9:48 pm
Location: williamston, n.c.
Contact:
United States of America

Post by FORDMANLCRACKEL »

Greg D wrote:Well no chevy motor in my old Ford,
Y block, 3x2s or 2x4s, and zoomie headers for me!
Once again :iagree: with ya Greg.

Lonnie
The most rewarding job i ever had was being a dad.
1988 Ranger Build http://s275.photobucket.com/albums/jj31 ... %20RANGER/
Post Reply