Now this is just WRONG!
Now this is just WRONG!
1964 F 100 - I am going to do "something" with it.......
viewtopic.php?f=32&t=15942
1987 Mustang LX Convertible, 2.3 Auto - cruiser.
1994 F 150 XLT 2WD
~ Yes - I adopted another cat..............
Cam L Milan,
You'll be missed my friend.
viewtopic.php?f=32&t=15942
1987 Mustang LX Convertible, 2.3 Auto - cruiser.
1994 F 150 XLT 2WD
~ Yes - I adopted another cat..............
Cam L Milan,
You'll be missed my friend.
- FORDMANLCRACKEL
- Posts: 1237
- Joined: July 11, 2006, 9:48 pm
- Location: williamston, n.c.
- Contact:

From what i've read Robert Yates helped design the heads. He just started with he already knew about Ford and made it work on a chebby. Still wrong any way ya look at it.
Lonnie
Lonnie
The most rewarding job i ever had was being a dad.
1988 Ranger Build http://s275.photobucket.com/albums/jj31 ... %20RANGER/
1988 Ranger Build http://s275.photobucket.com/albums/jj31 ... %20RANGER/
- Johnny Canuck
- Posts: 8291
- Joined: April 9, 2006, 11:14 pm
- Location: Edmonton, Alberta.

-
shawns fords
- Posts: 1111
- Joined: March 31, 2007, 11:34 am
- Location: Foxfield Colorado
- Contact:
im sure its a hand made sheet metal intake JC.
I dont know the reasoning behind the idea, I know them heads are supposed to flow big numbers, but it would have to cost a pretty penny to adapt them to a windsor. prob alot more than a nice set of good flowing trick flows or AFRs. doesnt actaully make any sence to me. 30 years ago when there wasnt a bunch of aftermarket heads I could understand. Maybe he owns a machine shop and had both laying around? thats what usually triggers these crazy ideas
I dont know the reasoning behind the idea, I know them heads are supposed to flow big numbers, but it would have to cost a pretty penny to adapt them to a windsor. prob alot more than a nice set of good flowing trick flows or AFRs. doesnt actaully make any sence to me. 30 years ago when there wasnt a bunch of aftermarket heads I could understand. Maybe he owns a machine shop and had both laying around? thats what usually triggers these crazy ideas

this is the good side
- Johnny Canuck
- Posts: 8291
- Joined: April 9, 2006, 11:14 pm
- Location: Edmonton, Alberta.

Hey this crap
http://images.customclassictrucks.com/f ... _f100+.jpg
doesn't make any dam sense to me either, but there are those who insist on putting square pegs into round holes..
http://images.customclassictrucks.com/f ... _f100+.jpg
doesn't make any dam sense to me either, but there are those who insist on putting square pegs into round holes..
It's a race.. Will hell freeze over or will JC finish his truck first. Stay tuned..
-
shawns fords
- Posts: 1111
- Joined: March 31, 2007, 11:34 am
- Location: Foxfield Colorado
- Contact:
That kind of stuff would be cool if only one guy did it, I will never understand why there are so many sheep in this hobby. The difference between men and sheep. one man comes up with a cool different way to do something, then 400,000 sheep follow. and for the next 50 years they will continue to make up "excuses" as to why they did it. The sad part, today the trades of hands on skills is dying fast. schools are continuing to drop their shop classes. now the rich guy just hires someone to do this work, and when it is finished he drives it around telling everyone its his. I wonder if thats whats going on with them LS1 heads?Johnny Canuck wrote:Hey this crap
http://images.customclassictrucks.com/f ... _f100+.jpg
doesn't make any dam sense to me either, but there are those who insist on putting square pegs into round holes..

this is the good side
-
Garbz
Letsee....
its 1926..........And a certian guy neamed Henry was forced to change his position and build the Model A. If this ass had his way we would still be driving model Ts.....
Innovation is the driving force. Henry would have been left behind if he didnt change, and we would all be driving mercedes or beemers...
Garbz
its 1926..........And a certian guy neamed Henry was forced to change his position and build the Model A. If this ass had his way we would still be driving model Ts.....
Innovation is the driving force. Henry would have been left behind if he didnt change, and we would all be driving mercedes or beemers...
Garbz
- FORDMANLCRACKEL
- Posts: 1237
- Joined: July 11, 2006, 9:48 pm
- Location: williamston, n.c.
- Contact:

Here is the thread if you care to read it. http://460ford.com/viewtopic.php?t=1892 ... stock+rods
I cant believe they havent baned him from the forum.
Lonnie
I cant believe they havent baned him from the forum.
Lonnie
The most rewarding job i ever had was being a dad.
1988 Ranger Build http://s275.photobucket.com/albums/jj31 ... %20RANGER/
1988 Ranger Build http://s275.photobucket.com/albums/jj31 ... %20RANGER/
- Paul Merrell
- Posts: 377
- Joined: July 17, 2006, 7:06 pm
- Location: Wilson N.C.
I like to think out of the box but why reinvent the wheel
There are so many options out there to get more power than doing it the hard way. You know what's the sad part is he may finish his car or truck and then sell it on ebay and then the new owner will have to find someone willing to work on it. I have done some mods on my truck but I have no intentions of selling it. But the mods I have done I think help the truck value not decrease it 
"Never underestimate the power of your actions. With one small gesture you can change a person's life - For better...or for worse." 1965 F250 4wheeldrive 390/4speed/dana 60 rear 3.73/dana 44/PB
- FORDMANLCRACKEL
- Posts: 1237
- Joined: July 11, 2006, 9:48 pm
- Location: williamston, n.c.
- Contact:

I remember Garbz saying "why reinvent the wheel" on here a few times.
I guess it must be ok to do it as long as you us Chevy parts on a Ford.
It also said on 460ford.com that someone had put 351c heads on a sbc, and im pretty sure it p.o. the chevy boys. I pretty sure neither combo will make anyone rich by building either one. Maybe someone will take a Mopar block put a Chevy head on one side and a Ford head on the other and maybe a revirse rotation crank. Then that would p.o. Ford and Chevy at the same time. Come to think of it ya just dont see the Mopar boys doing things like that.
Lonnie
I guess it must be ok to do it as long as you us Chevy parts on a Ford.
It also said on 460ford.com that someone had put 351c heads on a sbc, and im pretty sure it p.o. the chevy boys. I pretty sure neither combo will make anyone rich by building either one. Maybe someone will take a Mopar block put a Chevy head on one side and a Ford head on the other and maybe a revirse rotation crank. Then that would p.o. Ford and Chevy at the same time. Come to think of it ya just dont see the Mopar boys doing things like that.
Lonnie
The most rewarding job i ever had was being a dad.
1988 Ranger Build http://s275.photobucket.com/albums/jj31 ... %20RANGER/
1988 Ranger Build http://s275.photobucket.com/albums/jj31 ... %20RANGER/
I am not sure I'd call him a Ford guy. In racing it has been the thing forever to adapt non brand parts to a car, axles, distributors & the like. Heads from another brand of engine goes too far IMHO. Bad enough that the hot combo in a Ford "street rod" is a chebby engine.FORDMANLCRACKEL wrote: Come to think of it ya just dont see the Mopar boys doing things like that.
Lonnie
I do however know a guy who rods Chevys (has a real cool 37 2 door sedan) and uses Chevy engines in them. I respect him cause I know I'll never see a 351 Cleveland in his 40 Chevy pickup or the 37. Funny thing is, his 37 Chevy 2 door was the first pre 1950 hotrod I ever rode in.
1964 F 100 - I am going to do "something" with it.......
viewtopic.php?f=32&t=15942
1987 Mustang LX Convertible, 2.3 Auto - cruiser.
1994 F 150 XLT 2WD
~ Yes - I adopted another cat..............
Cam L Milan,
You'll be missed my friend.
viewtopic.php?f=32&t=15942
1987 Mustang LX Convertible, 2.3 Auto - cruiser.
1994 F 150 XLT 2WD
~ Yes - I adopted another cat..............
Cam L Milan,
You'll be missed my friend.
- FORDMANLCRACKEL
- Posts: 1237
- Joined: July 11, 2006, 9:48 pm
- Location: williamston, n.c.
- Contact:

Lonnie
The most rewarding job i ever had was being a dad.
1988 Ranger Build http://s275.photobucket.com/albums/jj31 ... %20RANGER/
1988 Ranger Build http://s275.photobucket.com/albums/jj31 ... %20RANGER/
Well no chevy motor in my old Ford,
Y block, 3x2s or 2x4s, and zoomie headers for me!
Y block, 3x2s or 2x4s, and zoomie headers for me!
1964 F 100 - I am going to do "something" with it.......
viewtopic.php?f=32&t=15942
1987 Mustang LX Convertible, 2.3 Auto - cruiser.
1994 F 150 XLT 2WD
~ Yes - I adopted another cat..............
Cam L Milan,
You'll be missed my friend.
viewtopic.php?f=32&t=15942
1987 Mustang LX Convertible, 2.3 Auto - cruiser.
1994 F 150 XLT 2WD
~ Yes - I adopted another cat..............
Cam L Milan,
You'll be missed my friend.
- FORDMANLCRACKEL
- Posts: 1237
- Joined: July 11, 2006, 9:48 pm
- Location: williamston, n.c.
- Contact:

Once againGreg D wrote:Well no chevy motor in my old Ford,
Y block, 3x2s or 2x4s, and zoomie headers for me!
Lonnie
The most rewarding job i ever had was being a dad.
1988 Ranger Build http://s275.photobucket.com/albums/jj31 ... %20RANGER/
1988 Ranger Build http://s275.photobucket.com/albums/jj31 ... %20RANGER/
