Page 1 of 1

Been working on my 68 Fairlane

Posted: February 9, 2008, 3:07 am
by Phil
Image

Image

Image

Image

Image

Image

Image

Image

Under the seam sealer. So much for "sealing" :roll:

Image

Image

Image

Image

Image

Only rust through on the whole body. 2 pinholes

Image

Image

Image

Image

Image

Image

the "good" end

Image

Image

Image

Image

Organ donor:

Image

Posted: February 9, 2008, 3:55 am
by Johnny Canuck
Wow. got a few rust issues to work thru there. Should be nice when done tho!!

Posted: February 9, 2008, 7:21 am
by 66fordtrucknut
Looks like they have the same issues as the old mustangs, I have alot of the same things going on with the 66' coupe, that cowl is a PITA. Good luck.
Charlie

Posted: February 9, 2008, 11:13 am
by Greg D
That's kinda odd that the cowl is rusted that bad when the rest of the car is as clean as it is. Nice to see that you are repairing the right way rather than some of the crap some people do.

Posted: February 9, 2008, 11:38 am
by Phil
I think it had rats nests in there that got wet cause even the floor was solid

Posted: February 9, 2008, 12:20 pm
by ICEMAN6166
looks like a bit of work but should be very nice when you get done.

too bad the slick dash does not come out like that.

Posted: February 9, 2008, 2:31 pm
by Slick Fan
You've been a busy guy! Looks like you're definitely fixin' it up right. :thumright:

My wife's first car was this '68 289 'Stang. She got it in 1983 & even by then, the cowl was rotted on the driver's side & in turn, had rotted the floor. We found out exactly how bad it was AFTER the sale was done. :roll:
There was a piece of plywood covering the hole in the floor, with carpet over the top. Live & learn. :lol:

Image

Posted: February 10, 2008, 1:22 am
by Greg D
My first Slick (Caribbean Turq 65 lwb 240 3 speed) was rusted so bad the it would lock up the column shifter if I went around a corner too fast (I finally supported the cab with a 2x4). I am now on my 7th slick, we learn, we cut and we weld; life is good! :D

Posted: February 14, 2008, 2:12 am
by blackagatha
you oughta take that car (in its current state of affairs) straight to the nearest custom car show.... blow em all away... haha

looks like you got a "wee bit" of work ahead of ya yet. good luck.

Posted: February 14, 2008, 1:54 pm
by The Big M
Nice Stumpjumper. :wink:

Posted: February 14, 2008, 5:11 pm
by Phil
The Big M wrote:Nice Stumpjumper. :wink:
92 stumpjumper pro

The frame, rear cogs, shifters and headset are the only original parts.
With shoes I have about $3500 in it. I used to ride all the time but I have to drive an hour to get to any decent hills.

Posted: February 14, 2008, 5:14 pm
by Phil
Project is on hold for a bit. Got speared by a tree sledding last night and have a deep bruise on my thigh. ER says no more sledding for a bit :(