Slick 60's

I have a 65 F-100 slick. Im in need of a couple knobs that work the lights wipers and the other accesories. Tjey are black tapered with a white insert in the end. They have a spring type metal piece that grips the shaftwhen pushed on. I could use 2 but 1 would get me by. Please let me know if you can help.
Thanks,
Bill

and they are cheap. like eight to 15$ depending on what knob you need.

not even that much... like $3.

but they charge MIN $10 shipping (ripoff), so you'd be stupid to place an order for just that.

I like the DC knobs though. The inserts dont yellow nearly as bad as the other companies, and they have an Allen set screw instead of the spring clip that used to pop off every time I pulled for defrost.

you know you just have to find a "used" set, clean um up, a little paint and some marbles work great
[img][img]http://img1.uploadhouse.com/fileuploads/3453/3453721dd1ce67cd93f59af4eb02bdcd7699b47.jpg[/img][/img]

Wow - that has to be the cleanest slick cockpit I've seen in a while. I think I could shave in the reflection from the horn ring.

Makes me want to clean up my cab - but then I'd have to start with a shovel, then the leaf blower and the pressure washer<g>

thanks for posting the inspiration!

Doug

Yep cheap at DC..

I used chrome plug bottons on my knobs. For some reason all the chrome in this pic looks rough but look better in person.

As far as the inserts for said factory knobs, I tried cutting a circle from the top off a Wimbledon white touchup paint from Duplicolor....I think 5/8" diameter (verify this yourself). Worked out good, only slight difference in color from remaining factory inserts. Due to the shape of the spraycan top, also has a slightly concave shape when installed, similar to factory inserts.

I thought ?MARBLES? but it looks like it turned out real nice. remember to make mental note of marbles... ...Anthony

Anthony wrote:I thought ?MARBLES? but it looks like it turned out real nice. remember to make mental note of marbles... ...Anthony

at least i would know where my marbles were when the wife asks me if i lost them and could say
"no, they are in the truck"

I sure like that shiney new looking original chrome dash bezel. Did you have it chromed or paint it or what. I would like to know where to have mine chromed if possible.

I thought about marbles too at one point.... Personally, I think they would look better as an opaque white though... kinda like original. Sorry, the blood red doesnt do it for me.

i was going to put pieces of glow in the dark plastic in mine...

Rick all made the nobs... DC resells them. and they are all allen head type.

Order them from Tom here on the board 66junkyarddog.

Garbz

didn't mean to steal your post Rick,
with the marbles!
and chrome horn benzil!
took the marbles out of my wife's decoration box and if she had of had pearl that's what would of been in there instead of burgandy, you'd be surprised on how many people have ask me if they light up? Horn Benzil came with the new steering wheel, that is after I paid them big bucks, got to love that imron paint when it comes to shine, close up shows that I did not spead that much time to detail in certain places, got to show everyone the new console I built out the one there, much better.
OK Rick get them nobs!

Garbz wrote:Rick all made the nobs... DC resells them. and they are all allen head type. Garbz

actually, no. there are 2 styles.

there is the allen set screw type, then there is a thread-on type.

The allen is used on the heater control, wiper, and THEIR repro choke cable

The screw on is used on factory air vent knobs and factory choke cable. (these are originally knurled shafts with plastic knob molded on. They have you run a die over the knurls, makes for some NASTY looking threads but they work fine

has anyone tried supergluing back in the old white centers to keep them from falling back out. that is if you have the center to glue back in.

Yeah, you can use superglue. I use the "thick" along with some kicker.
You can also use a dab of silicone to glue them.