If you have an AutoZone nearby,they will sell you the puller and let you return it when you are done using it. Kinda like free tool rental.

I have had this truck for about a year. It runs good except for hesitation when I accelrate in 2nd or 3rd.(three on the tree). Last week I changed the plugs. 5 out of the 6 were black. One was like new. The gap on the five black ones was .030+/-. The one clean plug was .036 +/-. The chilton manual s...

I have a 1966 F100 with a 240.
The PO installed a 2 barrel Holley carb, a Clifford intake man., a Unilite dist. and headers.
What spark plug should I use?
What should the Gap be?
What should the timing be set to?
THANKS, Samdog.

I will be puting my 66 F100 in winter hibernation in another month or so. What should I put in the gas for winter? (about 4 months with an occasinal ride around the block weather permitting). I live in southern New England.

OUTSTANDING. Exelent color choice.

The output shaft on my '66 f100 swb 240 3sp.on the colum has some play in it. Is this an easy fix? Or is it best to have a tranny shop take care of it. I am still driving it ocasionaly but I don't want to put repairing it off for too long. The trans. code on the door tag is "C". Thanks.

My 66 F100 has 3/16" brake lines front and rear.

I put a Falcon wheel on my '66. It is the same diameter.

My horn is dead. '66 F100. I unbolted it from the radiator support.(that was the easy part) I cannot get it out ! Do I have to remove my grill to get the s.o.b. out? Does anyone have any tricks or ideas how to replace this thing without removing the grill? I removed & reinstalled the grill over ...

I was able to get steel brake lines cut and flared at my local NAPA store. (They have a guy there that makes hydraulic lines etc.)The TEE was part of the hose like Iceman said. I got a new one from NAPA also. Next I will change the front brake lines and the fuel line from the tank(in cab)to the fuel...

I have a 66 F100 swb. 4wheel drum w/duel M.C. I am replacing the brake lines from the M.C.back to the drums. I was able to break lose all of the fittings and bleeder screws except for the brake HOSE where it connects to the Tee mounted with the rear end vent. I have tried everything but it will not ...

Some of the other trees might be Dogwood. You can tell by the BARK.

How much POR15 will I need to do the frame, underside of the bed, and underside of the cab?
How much Marine Clean? Metal Ready?

THANKS for your help!

I have a '66 F100 Styleside 6' bed. I want to remove the bed, flip it over and undercoat the bottom and the frame. I have a few questions. I want to use POR 15 on the bed and frame. I will be doing this in my driveway. It is not quite springtime here yet (southern New England) is is ok to use POR 15...

I would like to replace my sealed beams on my '66.
Is it OK to install halogen sealed beams without adding relays ect.?
I do very little night driving but the originals (one still has FOMOCO on it) sealed beams are a little dim.
I was looking at Sylvania Xtravision H6024 65/55W at the local AutoZoo.

I had the same problem on my 66. I found the float had a small crack in it. I changed the float and it now works fine. A float and gasket costs about $5.

Senator Vest's "Tribute to the Dog" It is strange how tenaciously popular memory clings to the bits of eloquence men have uttered, long after their deeds and most of their recorded thoughts are forgotten, or but indifferently remembered. However, whenever and as long as the name of the lat...

I have the push button type. What size fuse should I use?

I Have a '66 f100. The P.O. had the washer pump disconnected. I found a wire hanging in front of the fuse block under the dash that came from the pump. I hooked it up to the cig. lighter fuse (temporarily) and the pump works ok. I would lik to connect it to the one of the fuse block terminals. Shoul...

Congratulations N.Y. GIANTS .
Go RED SOX!!!!