Headers?

Louball · Post by **Louball** » August 20, 2009, 8:45 pm

I have a 351 that I am putting in my 66 and I can't seem to find headers that will fit. Do any of you guys have a 351 with headers in your truck? I have been told by Summit & Jeg's that I will have to have them custom made.

1961 slickwilly · Post by **1961 slickwilly** » August 20, 2009, 8:48 pm

which 351 do you have m,c,w? i'm sure you could find some block huggers or shorty headers the you can run that way

Post by **Greg D** » August 20, 2009, 9:20 pm

Stock 5.0 Mustang headers should be close.

Louball · Post by **Louball** » August 21, 2009, 5:23 pm

1971 351 W

1961 slickwilly · Post by **1961 slickwilly** » August 21, 2009, 5:58 pm

http://www.summitracing.com/parts/SUM-G9036/

heres the link to the headers theses will work you'll have to copy and paste

jwcnj45 · Post by **jwcnj45** » August 22, 2009, 6:04 pm

302 block huggers will work, but Sanderson headers in San Francisco makes headers specific for the 351W. I think the only diferrence is the length of the pipes to where the collector is. Check them out or call them.

Louball · Post by **Louball** » August 23, 2009, 7:47 pm

Thanks for the info guys, I am going to try and get some on Monday.

ABA · Post by **ABA** » August 23, 2009, 7:57 pm

I ran Mustang shorties on the 351W in the '72 Bumpside I had. Should work the same in a '66...they're pretty cheap price wise too.

motormount1 · Post by **motormount1** » August 25, 2009, 8:01 pm

look at the headders clifford perfomance has.

aeromech · Post by **aeromech** » August 26, 2009, 12:41 am

I have a 1969 Bronco with 351W and JBA shortie headers that has proven a great setup. I am now installing a 351W with C-6 in a '65 F-100 short bed and want to use JBA #1653 mid length shorty headers. Has anyone had experience with these for fit? They are cataloged for '65-'73 Mustangs.