Leaf springs

The place to talk Slicks. All we ask is that discussion has something to do with slicks...

Moderators: Casey 65, Kid

Post Reply
rctcomp
Posts: 27
Joined: June 4, 2008, 9:42 pm
Location: Grantsville, Ut

Leaf springs

Post by rctcomp »

The leaf springs on my 65 1/2 ton are wonky. is there a way to fix this without paying LMC $800? Can I take some leafs from my 64 3/4 ton parts truck and replace or add them to my 65? They're about the same width.
Image
Image
ICEMAN6166
Posts: 11470
Joined: July 11, 2006, 11:28 am
Location: Dove Creek, Co. elevation 6842
Poland

Post by ICEMAN6166 »

yes
the only difference between the f100/250 is the amount of springs in the stack. some might be a bit thicker too but the width is the important part.
1966 F250 4x4
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
Brian Taylor
Posts: 1469
Joined: August 18, 2009, 3:52 pm
Location: Dallas , Texas
Contact:
United States of America

Post by Brian Taylor »

I have to ask:
What does "wonky" mean??
1966 Ford F-100 LWB 300
Obsa
Posts: 1928
Joined: July 19, 2006, 4:33 pm
Location: Northwest Georgia
United States of America

Post by Obsa »

As my dad used to say, somewhere there was a horse that died a painful death from terminal constipation due to missing a key part of its anatomy.
User avatar
jakdad
Posts: 1968
Joined: July 18, 2006, 4:07 pm
Location: Katy,Texas

Post by jakdad »

I think your best bet is to take them to a spring company and have them rearched. They will also retemper the springs. You will probably have to go to Salt Lake City to find a spring company. Good luck.
Jim
ICEMAN6166
Posts: 11470
Joined: July 11, 2006, 11:28 am
Location: Dove Creek, Co. elevation 6842
Poland

Post by ICEMAN6166 »

last time i had work done at the spring shop re-arch was only guaranteed if a new mainspring (the one with the bushings) was used.
1966 F250 4x4
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
rctcomp
Posts: 27
Joined: June 4, 2008, 9:42 pm
Location: Grantsville, Ut

Post by rctcomp »

Whats the advantage to getting the re-arch vs using leafs from another spring? I've never torn down a stack of springs before, maybe I should just bite the bullet and 'spring' for a new set.

I substitute wonky in place of f'd-up when the kids are around.

.
User avatar
jmf66
Posts: 40
Joined: May 11, 2009, 11:01 am
Location: Franklin, TN

Post by jmf66 »

I've had springs rearched before and it only last for a while. If they're wompy.. you need new springs. Heck, they're over 45 years old! A local spring shop may be you're best bet. You might also check Kansas City Spring.. For my falcon, it was cheaper to order from them. Their website is generalspringkc.com
Post Reply